Re[6]: [LARTC] CBQ Traffic control not working

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > tc class add dev eth0 parent 1:1 classid 1:8 cbq bandwidth 10Mbit rate
> > 64Kbit allot 1514 cell 8 weight 6.4Kbit prio 1 maxburst 20 avpkt 1000 split
> > 1:0      tc filter add dev eth0 parent 1:0 protocol ip prio 1 handle 4 fw
> > classid 1:8
> Euh.  You don't have any filters?  How do you redirect traffic to a class?
> You need some filters to do so.

The filters are there... if you take a closer look you'll that my
copy/paste was falty...

But I can tell you I solved the problem. I attched my solution below.
Stef, you are right, my filters are not working...
In fact I don't konow what I did wrong:
for marking packets depending on their source I used
    ipchains -A output -p all -s 192.168.1.0/30 -m 1





tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1: cbq bandwidth 10Mbit cell 8 avpkt 300 mpu 64
tc class add dev eth1 parent 1: classid 1:1 cbq bandwidth 10Mbit rate 72Kbit weight 7.2Kbit prio 7 allot 1514 maxburst 20 avpkt 300 bounded isolated

tc class add dev eth1 parent 1:1 classid 1:3 cbq bandwidth 10Mbit rate 64Kbit weight 6.4Kbit prio 6 allot 1514 bounded isolated
ip route add 192.168.1.8/29 via 192.168.1.1 realm 1
tc filter add dev eth1 parent 1:0 protocol ip prio 1 route to 1 classid 1:3

tc class add dev eth1 parent 1:1 classid 1:2 cbq bandwidth 10Mbit rate 14Kbit allot 1514 cell 8 weight 1.4Kbit prio 7 maxburst 20 avpkt 300 split 1:0 bounded
isolated
ip route add 192.168.3.8/29 via 192.168.3.1 realm 2
tc filter add dev eth1 parent 1:0 protocol ip prio 7 route to 2 classid 1:2



[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux