Okay I am copying the diagram again.. I remade it in acsi and replaced the tabs with space.Have tested it on my box by sending the email to myself and another box. It looks fine..
I hope it dosent breaks this time
eth 0 192.168.1.50
\
|----------| \ |--------------|
-----------------| gateway 1|-------------------------|gateway2 |
/|_______ |\ |--------------|
/ \ / \
eth0 eth1 - / \
61.X.X.X 192.168.1.1 eth1 eth2
(public) | 192.168.2.51 192.168.3.52
| |
------------ |
| BOX 1 | -----------------
------------- | Box 3 |
192.168.1.101 ---------------
192.168.3.101
My Problem is
A) I am unable to ping from Box 3 (192.168.3.101) to Box 1(192.168.1.101). Any comments or reasons why?
B) I have figured out that if I enable Masquerading then problem A is solved. Can someone explain why?
C) Is it possible without Masquerading ?
I am in a fix and any Help would be very much appreciated...??
Thanks and Regards Dp
Dhirendra Pal Singh wrote:
Hi All.. I think the image got screwed up... I am giving the description again..
Dsl feed goes to gateway 1. Its internal ip address is of 192.168.1.XXX. Now from here goes the feed to another gateway which eth0 ip address is 192,168.1.50. It has 2 more eth - eth1 and eth2. Their ip address are 192.168.2.51 and 192.168.3.XXX respectively.
Now my problem is that all the computers connect to 192.168.2.XXX are unable to point to the computers of 192.168.1.XXX. Though strangely I can ping to 192.168.1.1 wich is the internal ip address of the gateway 1.
Can someone help me whith this configuration...? rest question are below.. Thanks in advance .. dp
Dhirendra Pal Singh wrote:
Hi All, I have the following setup on redhat linux 8.0 ...
eth 0 192.168.1.50
\
|--------------| \ |--------------|
-----------------| gateway 1|-------------------------|gateway2 |
/|_______ |\ |--------------|
/ \ / \
eth0 eth1 - / \
61.X.X.X 192.168.1.1 eth1 eth2
(public) | 192.168.2.51 192.168.3.52
| |
------------ |
| BOX 1 | ---------------- ------------- | Box BOX 3 |
192.168.1.101 ---------------
192.168.3.101
My Problem is
A) I am unable to ping from Box 3 (192.168.3.101) to Box 1. Any comments or reasons why?
B) I have figured out that if I enable Masquerading then problem A is solved. Can someone explain why?
C) Is it possible without Masquerading ?
I am in a fix and any Help would be very much appreciated...??
Thanks and Regards Dp
_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
