I cannot read your diagram because you are using proportional spaced fonts instead of monospaced. Not everyone has the same font spacing as you unless you use monospaced. David On Wed, 12 Mar 2003 13:39:28 -0800 Dhirendra Pal Singh <list@xxxxxxxxxxxxxx> wrote: > Hi All, > I have the following setup on redhat linux 8.0 ... > > eth 0 > 192.168.1.50 > \ > |--------------| \ > |--------------| > -----------------| gateway 1|-------------------------|gateway2 | > /|_______ |\ > |--------------| > / \ / > \ > eth0 eth1 - / > \ > 61.X.X.X 192.168.1.1 eth1 > eth2 > (public) | 192.168.2.51 > 192.168.3.52 > | > | > ------------ > | > | BOX 1 | > ---------------- > ------------- > | Box 3 | > 192.168.1.101 > --------------- > > 192.168.3.101 > > My Problem is > > A) I am unable to ping from Box 3 (192.168.3.101) to Box 1. Any comments > or reasons why? > B) I have figured out that if I enable Masquerading then problem A is > solved. Can someone explain why? > C) Is it possible without Masquerading ? > > I am in a fix and any Help would be very much appreciated...?? > > Thanks and Regards > Dp > > > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >
