[LARTC] frame relay

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: "LARTC mailing list (E-mail)" <lartc@xxxxxxxxxxxxxxx>
Subject: [LARTC] frame relay
From: Andreani Luca <landreani@xxxxxxxxxxx>
Date: Thu, 23 May 2002 15:29:02 +0200
Delivered-to: lartc@outpost.ds9a.nl
List-archive: <http://mailman.ds9a.nl/pipermail/lartc/>
List-help: <mailto:lartc-request@mailman.ds9a.nl?subject=help>
List-id: Linux Advanced Routing & Traffic Control list <lartc.mailman.ds9a.nl>
List-post: <mailto:lartc@mailman.ds9a.nl>
List-subscribe: <http://mailman.ds9a.nl/mailman/listinfo/lartc>,<mailto:lartc-request@mailman.ds9a.nl?subject=subscribe>
List-unsubscribe: <http://mailman.ds9a.nl/mailman/listinfo/lartc>,<mailto:lartc-request@mailman.ds9a.nl?subject=unsubscribe>
Sender: lartc-admin@xxxxxxxxxxxxxxx

Hi,

I need some information about frame relay support under linux.
In particular I wonder if it is possible to use frame relay over E1 port
without buying a specific card (sangoma s series and similar...)
Are there any driver freely available?

Many thanks,

Luca

Follow-Ups:
- Re: [LARTC] frame relay
  - From: M.F. PSIkappa

Prev by Date: RE: [LARTC] Beginner
Next by Date: Re: [LARTC] squid + tc
Previous by thread: [LARTC] Beginner
Next by thread: Re: [LARTC] frame relay
Index(es):
- Date
- Thread

[Index of Archives] [LARTC Home Page] [Netfilter] [Netfilter Development] [Network Development] [Bugtraq] [GCC Help] [Yosemite News] [Linux Kernel] [Fedora Users]

Powered by Linux