You have to enable QoS and HTB in "make menuconfig". If you then set HTB up as module you have to insmod it of course. The error bellow seems like if you have no htb compiled or loaded into kernel. devik On Fri, 17 May 2002, Justin Owens wrote: > Hi, > > Could someone send me a dump of what options I need configured in a 2.4.18 > kernel to get htb3.3 to work. > > At present I am getting the following error: > > [root@xxx src]# tc qdisc add dev eth1 root handle 1: htb default 12 > RTNETLINK answers: Invalid argument > [root@xxx src]# > > Alternatively any other suggestions would be welcome. > > Regards > > Justin Owens > > > The information contained in this email is privileged and confidential, intended only for the use of the individual or entity to whom it is addressed. If the reader of this email is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify the sender immediately by email and delete this email. Any views expressed in this email are those of the individual sender unless the sender specifically states > This mail was virus scanned by SurfControl. > > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > >
