On Monday 01 April 2002 02:03, Srikanth Goteti wrote:
> Hi,
> I am using the followings commands to execute to control bandwidth between
>
> 192.168.1.5 - 192.168.1.4 to 50Mbps
>
> but when I run these series of commands and check the bandwidth between
> these I get only 19Mbps.
How do you measure the bandwidth ?
> /sbin/tc qdisc add dev eth0 root handle 10: cbq bandwidth 100Mbit avpkt
> 1000
>
> /sbin/tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 100Mbit
> rate 100Mbit weight 10Mbit maxburst 20 avpkt 1000 allot 1514 prio 3
And what if you bound this class as well ?
Stef
--
stef.coene@xxxxxxxxx
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
