Hello John ,
Thanks for ur reply . But still it have not worked
out.
i have attached the results is that iam making some
mistakes in script please guide me
Advance Thanks
vanitha
/sbin/tc -s qdisc show dev
eth0
qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
Sent
450 bytes 6 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle
624 undertime 0
/sbin/tc -s filter show dev eth0
filter parent 1:
protocol ip pref 1 fw
filter parent 1: protocol ip pref 1 fw handle 0x1
classid 1:2
/sbin/tc -s class show dev eth0
class cbq 1: root rate 10Mbit (bounded,isolated) prio
no-transmit
Sent 3725 bytes 47 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate
10Mbit prio 1
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:2 parent 1:1
rate 100Kbit (bounded) prio 1
Sent 0 bytes 0 pkts (dropped 0,
overlimits 0)
borrowed 0 overactions 0 avgidle 1.79878e+06 undertime 0
/sbin/iptables -t mangle
-L
Chain PREROUTING (policy
ACCEPT)
target prot opt
source
destination
MARK tcp --
anywhere
172.16.1.81 MARK set 0x1
Chain OUTPUT (policy
ACCEPT)
target prot opt
source
destination
----- Original Message -----
Sent: Sunday, December 02, 2001 5:01
AM
Subject: Re: [LARTC] cbq-fw
classifier
please use
tc -s qdisc show dev eth1
tc -s class show dev
eth1
tc -s filter show dev eth1
to see where the packet goes ,
or how much it borrows .....
It seems your script can't regular the classid
1:2
cheers
john
----- Original Message -----
Sent: Thursday, November 01, 2001
5:04 PM
Subject: [LARTC] cbq-fw
classifier
Hi All,
I was using CBQ to control the bandwidth rate ,
while i use the qdisc cbq with u32 filter and route filter it is
working fine ,but when i use fw classifier it
seems that the bandwidth rate 100kbit is not picked.
i have used the following
commands
/sbin/iptables -I PREROUTING -t mangle -p tcp
-d 172.16.1.81 -j MARK --set-mark 1
/sbin/tc qdisc add dev eth0 root handle 1: cbq
bandwidth 10Mbit cell 8 avpkt 1000 mpu 64
/sbin/tc class add dev eth0
parent 1:0 classid 1:1 cbq bandwidth 10Mbit rate 10Mbit allot 1514 cell 8
weight 1Mbit prio 8 maxburst 20 avpkt 1000
/sbin/tc class add dev eth0
parent 1:1 classid 1:2 cbq bandwidth 10Mbit rate 100Kbit allot 1514 cell 8
weight 10Kbit prio 3 maxburst 20 avpkt 1000
/sbin/tc filter add dev eth0 protocol ip parent
1:0 prio 1 handle 1 fw classid 1:2
is that anything i have missed out
?
i have tested these commands using
Linux-2.4.10.
Advance Thanks
Vanitha
