In order to delete a filter, the prio value is important . If I don't
remember too bad , if you type
# tc filter del dev eth0 parent 1:0 prio 100
you should be done.
Bewary : all filters which match such description will be erased, regardless
of other parameters such fmark/u32/etc.
God Saves Tc
Jose,
----- Original Message -----
From: <macca@xxxxxxxxx>
To: <lartc@xxxxxxxxxxxxxxx>
Sent: Friday, July 13, 2001 3:48 PM
Subject: [LARTC] How to del the filter?
> I write the following istruction:
>
> #Attach CBQ to the root of the output device
> tc qdisc add dev eth0 root handle 1: cbq bandwidth 10Mbit cell 8 avpkt
1000 mpu 64
>
> #Class for the real-time traffic. Avpkt here doesn't have the default
value of 1000 because
> #realtime multimedia traffic is usually characterized by small packets \
> tc class add dev eth0 parent 1:0 classid 1:1 cbq \
> bandwidth 10Mbit rate 1Mbit avpkt 400 prio 1 bounded isolated \
> allot 1514 weight 1 maxburst 2
>
> #aggiungo il filtro guardando esempio howto Advanced Routing(2.4) pag 22
> tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip dst
192.168.1.2/32 flowid 1:1
>
> Now i don't manage to del the filter.Someone can write me the command
please.
> I wrote this istruction in the way that they were similar with the sample
in the Avanced Howto 2.4. I don't understand why it's different from the way
that someone can understand from the help of tc!!
> Thanks (and sorry for my english :-))
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/
>
