Ok.. I can do that. How do I use all three. I appreciate your patience and help. Josh -----Original Message----- From: lartc-admin@xxxxxxxxxxxxxxx [mailto:lartc-admin@xxxxxxxxxxxxxxx]On Behalf Of Arthur van Leeuwen Sent: Tuesday, April 03, 2001 9:38 AM To: Josh Sides Cc: LARTC@xxxxxxxxxxxxxxx Subject: RE: [LARTC] @home cable modem On Tue, 3 Apr 2001, Josh Sides wrote: > My wording is bad. I want to assign all ip's to one ethernet card which > will be directly connected to the cable modem. I'm trying to set up a > situation so that I can play with iptables and nat. I want to get rid of > the masquerading. Ah. ip addr add <ipaddr1> dev eth0 && ip addr add <ipaddr2> dev eth0 && ip \ addr add <ipaddr3> dev eth0 And then you set up routes and you select which uplink IP address to use as default. Magic needs to happen if you want to use all three. Doei, Arthur. -- /\ / | arthurvl@xxxxxxxxxx | Work like you don't need the money /__\ / | A friend is someone with whom | Love like you have never been hurt / \/__ | you can dare to be yourself | Dance like there's nobody watching _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
