My wording is bad. I want to assign all ip's to one ethernet card which will be directly connected to the cable modem. I'm trying to set up a situation so that I can play with iptables and nat. I want to get rid of the masquerading. Thanks Josh On Tue, 3 Apr 2001, Josh Sides wrote: > AT&T at home will provide multiple IP addresses, but they do not guarentee > that they will be in the same subnet. I requested two additional ip's so of > course now I have ip's in three different subnets. > > With Windows I know it is only possible to have 1 active default route. > > Is there anyway to put all three ip's on one linux machine and have the > internet have the ability to deliver packets to all three? Yes. However, I do not fully understand your question. Do you want to make a multipath uplink? Or do you just want to be reachable through all three IP addresses? (The latter is virtually trivial). Doei, Arthur. -- /\ / | arthurvl@xxxxxxxxxx | Work like you don't need the money /__\ / | A friend is someone with whom | Love like you have never been hurt / \/__ | you can dare to be yourself | Dance like there's nobody watching _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
