|
Hi All,
I am using CBQ init file v 0.6.1 and doing banwidth
allocation . I have to make seperate file fo reach group or ip i want to cap
.
for e.g. if I have to cap say ten ips from
192.168.1.10 to 192.168.1.20 , each ip to say 32 Kbits , then do i have to make
seperate file for each . I try doing something like this but this didn`t worked
.
Sample Config file :
DEVICE=eth1,10Mbit,1Mbit
RATE=32Kbit WEIGHT=3Kbit PRIO=5 RULE=192.168.1.10 RULE=192.168.1.11
RULE=192.168.1.12
and so on
But instead of allocating each Ip a bandwidth of 32
KBit , it capped for all ips combined to 32 Kbit.
Is there a work around of this or i have to make a
seperate file for each IP.
Thanks
Deepak
|
