Hi! Please post the other tc commands too, so I may test it. Regards, Daniel > -----Ursprungligt meddelande----- > Från: lartc-admin@xxxxxxxxxxxxxxx > [mailto:lartc-admin@xxxxxxxxxxxxxxx]För Fredrik Rambris > Skickat: Tuesday, October 17, 2000 2:04 PM > Till: lartc@xxxxxxxxxxxxxxx > Ämne: [LARTC] Bandwidth limiting problem > > > Hi! > > I'm trying to limit the access to and from a 2MBit leased line to a > total of 128kbit (up+down must not exceed 128kbit). > > eth0 is connected to our lan with 100MBit > eth1 is connected to Internet via a router > > I've tried modifying the examples in the howto and it succeeds up to the > filter definition where I get an error. > > tc filter add dev eth0 parent 10:0 protocol ip prio 100 u32 match ip \ > dst 192.168.3.0/24 flowid 10:100 > > gives > > RTNETLINK answers: Ogiltigt argument > > (Ogiltigt argument == Invalid argument) > > This should be a real easy one. Only one class (the whole local network) > should only get access to 128kbit of the 2Mbit. > > Anyone have some idea of what I could be doing wrong? > > / Fredrik Rambris > -- > Admera Solution Provider AB > Tel: 0733-850 814 > Position: 55°36´13N 13°03´36E
