Re: Filter in HTB not working

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Qui, 2002-12-19 ās 10:06, Nestor S A Melo escreveu:

Nestor,

First: If my english is poor, you can contact me direct by email in
portuguese since I`m Brazilian too :)

So, somebody correct me if I`m wrong ( Stef? ):

1 - I think you share more bandwidth than you have allocated.  
2 - In sfq directive, you should write:
    #tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10
3 - You've marked packets with iptables -t mangle, but you're using u32
instead fw.I'm not sure if you did the correct u32 configuration too.

Probably you must use:

#tc filter add dev eth0 parent 1: protocol ip prio 100 handle 6 fw classid 1:10

The handle is the parameter that says to tc what mark you're using and
fw is the parameter that says to tc that you're using a firewall mark.

I hope I have helped you

Miguel Figueiredo
Linux Suport Analist

> I have a problem in setting up HTB.
> 
> It appears filters doesn't work at all, besides "tc filter show" show it as 
> being correctly configured.
> 
> Class 1:10 never sent any traffic, but as iptables show below, it should be 
> sending packets.
> 
> The HTB version I'm using is 3.3, with kernel 2.4.17.
> 
> The setup is as follows:
> ---------------------------------------------------------------
> tc qdisc del dev eth0 root
> tc qdisc add dev eth0 root handle 1 htb default 20 r2q 10
> 
> tc class add dev eth0 parent 1: classid 1:2 htb rate 256kbit
> 
> tc class add dev eth0 parent 1:2 classid 1:10 htb rate 26kbit ceil 128kbit 
> prio
> 1
> tc qdisc add dev eth0 parent 1:10 handle 10 sfq perturb 10
> tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip sport 23 
> 0xffff classid 1:10
> 
> tc class add dev eth0 parent 1:2 classid 1:20 htb rate 220kbit ceil 256kbit 
> prio 2
> tc qdisc add dev eth0 parent 1:20 handle 20 sfq perturb 10

> ---------------------------------------------------------------
> 
> The stats:
> ---------------------------------------------------------------
> [root@NL1000 htb]# tc -s -d qdisc show
> qdisc sfq 20: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 10sec
>  Sent 5116 bytes 94 pkts (dropped 0, overlimits 0)
> 
>  qdisc sfq 10: dev eth0 quantum 1514b limit 128p flows 128/1024 perturb 10sec
>  Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
> 
>  qdisc htb 1: dev eth0 r2q 10 default 20 direct_packets_stat 0 ver 3.6
>  Sent 5116 bytes 94 pkts (dropped 0, overlimits 0)
> 
>  [root@NL1000 htb]# tc -s -d class show dev eth0
> class htb 1:10 parent 1:2 leaf 10: prio 1 quantum 1000 rate 26Kbit ceil 
> 128Kbit
> burst 1632b/8 mpu 0b cburst 1762b/8 mpu 0b level 0
>  Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
>  lended: 0 borrowed: 0 giants: 0
>  tokens: 401969 ctokens: 88149
> 
> class htb 1:2 root rate 256Kbit ceil 256Kbit burst 1926b/8 mpu 0b cburst 
> 1926b/8 mpu 0b level 7
>  Sent 5116 bytes 94 pkts (dropped 0, overlimits 0)
>  lended: 0 borrowed: 0 giants: 0
>  tokens: 46975 ctokens: 46975
> 
> class htb 1:20 parent 1:2 leaf 20: prio 2 quantum 2816 rate 220Kbit ceil 
> 256Kbit burst 1880b/8 mpu 0b cburst 1926b/8 mpu 0b level 0
>  Sent 5116 bytes 94 pkts (dropped 0, overlimits 0)
>  lended: 94 borrowed: 0 giants: 0
>  tokens: 53324 ctokens: 46975
> 
> [root@NL1000 htb]# tc -s -d filter show dev eth0
> filter parent 1: protocol ip pref 100 u32
> filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1
> filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800 
> bkt
> 0 flowid 1:10
>   match 00170000/ffff0000 at 20
> 
> [root@NL1000 htb]# iptables -t mangle -L -nvx
> Chain PREROUTING (policy ACCEPT 3590 packets, 557751 bytes)
>     pkts      bytes target     prot opt in     out     source               
> destination
>        0        0 MARK       tcp  --  *      *       0.0.0.0/0            
> 0.0.0.0/0          tcp dpt:23 MARK set 0x6
>      146    12954 MARK       tcp  --  *      *       0.0.0.0/0            
> 0.0.0.0/0          tcp spt:23 MARK set 0x6
> 
> Chain OUTPUT (policy ACCEPT 315 packets, 16936 bytes)
>     pkts      bytes target     prot opt in     out     source               
> destination
> ---------------------------------------------------------------
> 
> So, what is going wrong?
> 
> Thanks in advance,
> -- 
> _____________________
> Nestor S A Melo
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> 


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/


[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux