This was my error. Thanks again.
Andrea Rossato wrote:
Paolo Poletti wrote:
# tc qdisc add dev eth0 root tbf rate 10kbit latency 50ms burst 1000
Then i've tried to transfer a big (20 Mbyte) file onto my lan, using
ftp and the client (ncftp) is saying that the average transfer speed
is 39.71 kB ( around 400 kbit). What i'm missing ?
you are shaping outgoing traffic: so if you want to give it a try you
must upload!
to shape incoming traffic you need either ingress qdisc or IMQ : have
a look at LARTC.
you are downloading at 300kbit, by the way: 39.71*8
bye
andrea
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
