Laurent, You should be able to do it with some elbow grease and Ben Greear's linux vlan implementation. http://www.candelatech.com/~greear/vlan.html This allows you to attach a single ethernet device to an 802.1q port on your switch, and configure multiple interfaces for each VLAN. If you want to route, just turn the box into a router--sure it has only one ethernet cable, but it has multiple interfaces, right? I have no experience with it. Good luck, -Martin : Hello, : : Is it possible with a linux Bow to route différents VLANs, like a router : : cisco can does ? : : Thank for your answers : : Laurent Foucher : : _______________________________________________ : LARTC mailing list / LARTC@mailman.ds9a.nl : http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ : -- Martin A. Brown --- SecurePipe, Inc. --- mabrown@securepipe.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
