On Tuesday 22 October 2002 11:14, lihpc@Legend.com wrote:
> SORRY! not 12bits, should 12mbits
>
>
> WHEN i send packets from 10.1.1.1 at rate frome 12mbit to 50mbit BY
> using
> SMARTBIT 600, the rate of class 10:100 is always 12Mbits.
>
> >I suppose it's the SMATRBIT 600 that says it sends 12bits.
> >WHAT if you change 12mbit to 15mbit. WHAT if you send more then 20Mbit.
>
> WHAT
>
> >if you change 12mbit to a lower value (1mbit).
> >CAN you can do that and post the results?
> >I don't think there is an error in your setup.
>
> WHEN i change 12mbit to 15mbit and send packets at rate
> 15mbit,20mbit,30mbit,50mbit, the rate of class 10:100 is always 15mbits.
> WHEN i change 12mbit to 30mbit and send packets at rate
> 30mbit,40mbit,50mbit, the rate of class 10:100 is always 30mbits.
> WHEN i change 12mbit to a lower value (1mbit) and send packets at rate
> 1mbit,2mbit,10mbit,20mbit, the rate of class 10:100 is always 1mbits.
The ceil parameter always worked for me. What version of tc/htb/kernel are
you using?
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
