On Monday 21 October 2002 05:44, lihpc@Legend.com wrote:
> Hi ;
>
> MY script:
>
> tc-htb3 qdisc del dev eth2 root
> ipchains -F
>
> tc-htb3 qdisc add dev eth2 root handle 10: htb default 20 r2q 40
>
> tc-htb3 class add dev eth2 parent 10: classid 10:1 htb rate 50Mbit burst
> 2000
>
> tc-htb3 class add dev eth2 parent 10:1 classid 10:100 htb rate 12mbit ceil
> 50mbit prio 1
> tc-htb3 class add dev eth2 parent 10:1 classid 10:20 htb rate 38mbit ceil
> 50Mbit prio 8
>
> ipchains -A fw -s 10.1.1.1 -m 100
> ipchains -A fw -s 0.0.0.0 -d 0.0.0.0 -j ACCEPT
>
> tc-htb3 filter add dev eth2 protocol ip parent 10:0 prio 1 handle 100 fw
> classid 10:100
>
> WHEN i send packets at 20mbit from 10.1.1.1 ,
> #tc -s -d qdisc show dev eth2
> qdisc htb 10:
> Sent 246602122 bytes 487287 pkts (dropped 323938, overlimits 1850710)
>
> #tc -s -d class show dev eth2
> class htb 10:1 root prio 0 rate 50Mbit ceil 50Mbit burst 1985b/8 mpu 0b
> cburst 67121b/8 mpu 0b quantum 0 level 7
> Sent 246602122 bytes 487287 pkts (dropped 0, overlimits 0)
> rate 8bps
>
> class htb 10:100 parent 10:1 prio 1 rate 12Mbit ceil 50Mbit burst 17325b/8
> mpu 0b cburst 67121b/8 mpu 0b quantum 39321 level 0
> Sent 246552164 bytes 486503 pkts (dropped 323938, overlimits 0)
>
> class htb 10:20 parent 10:1 prio 1 rate 38Mbit ceil 50Mbit burst 51396b/8
> mpu 0b cburst 67121b/8 mpu 0b quantum 124518 level 0
> Sent 49958 bytes 784 pkts (dropped 0, overlimits 0)
> rate 8bps
>
>
> a class 10:100 can not borrow from a parent 10:0 ,WHY?
How do you come to that conclustion ?????
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
