hi all I just tried to test whether the HTB works well or not .. (policy is very simple ^^;;) I tried HTB simulator 'Ethloop' with lo (loopback ) and I found HTB works well....(very well) So I changed lo to eth0 and tested .. ./tc qdisc add dev eth0 root handle 1: htb default 10 ./tc class add dev eth0 parent 1: classid 1:1 htb rate 500kbps ceil 500kbps ./tc class add dev eth0 parent 1:1 classid 1:2 htb rate 180kbps ceil 500kbps ./tc class add dev eth0 parent 1:2 classid 1:10 htb rate 150kbps ceil 500kbps prio 2 ./tc class add dev eth0 parent 1:2 classid 1:11 htb rate 5kbps ceil 10kbps prio 2 ./tc class add dev eth0 parent 1:1 classid 1:12 htb rate 10kbps ceil 20kbps prio 1 ./tc qdisc add dev eth0 parent 1:10 handle 20: pfifo limit 5 ./tc qdisc add dev eth0 parent 1:11 handle 30: pfifo limit 5 ./tc qdisc add dev eth0 parent 1:12 handle 40: sfq perturb 10 ./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 23 0xffff flowid 1:11 ./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 80 0xffff flowid 1:12 It works well with outgoing packets .. BUT!! I changed last two lines to control Incoming packets .. like below.. ./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dport 23 0xfffe flowid 1:11 ./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dport 80 0xfffe flowid 1:12 It never works .. !! If I send to 23 port 50kbps It receive 50kbps.. I have no idea .. Did I thought wrong? thanks in advance... _________________________________________________________________ 클릭하면 나만의 광고가 뜹니다. 검색 키워드 광고 문의 http://www.msn.co.kr/search/keywordshop _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
