|
hi all
I just tried to test whether the HTB works well or not ..
(policy is very simple ^^;;)
I tried HTB simulator 'Ethloop' with lo (loopback ) and I
found HTB works well....(very well)
So I changed lo to eth0 and tested ..
./tc qdisc add dev eth0 root handle 1: htb default 10
./tc class add dev eth0 parent 1: classid 1:1 htb rate 500kbps ceil 500kbps ./tc class add dev eth0 parent 1:1 classid 1:2 htb rate 180kbps ceil 500kbps ./tc class add dev eth0 parent 1:2 classid 1:10 htb rate 150kbps ceil 500kbps prio 2 ./tc class add dev eth0 parent 1:2 classid 1:11 htb rate 5kbps ceil 10kbps prio 2 ./tc class add dev eth0 parent 1:1 classid 1:12 htb rate 10kbps ceil 20kbps prio 1 ./tc qdisc add dev eth0 parent 1:10 handle 20: pfifo limit 5 ./tc qdisc add dev eth0 parent 1:11 handle 30: pfifo limit 5 ./tc qdisc add dev eth0 parent 1:12 handle 40: sfq perturb 10 ./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32
match ip sport 23 0xffff flowid 1:11
./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 80 0xffff flowid 1:12 It works well with outgoing packets
..
BUT!!
I changed last two lines to control Incoming
packets .. like below..
./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32
match ip dport 23 0xfffe flowid 1:11
./tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dport 80 0xfffe flowid 1:12 It never works .. !! If I send to 23 port 50kbps It
receive 50kbps.. I have no idea ..
Did I thought wrong?
thanks in advance...
|
