Rimas, I have noticed you asking a few questions to the list in the last few days about the use of "ip route". The short answer on this one is: # ip route add $DESTINATION from $SOURCE via $GATEWAY Might I suggest the following: My doc: http://plorf.net/linux-ip/ See appendix F -- "ip route" The iproute2 manual: http://defiant.coinet.com/iproute2/ip-cref/ here, as HTML Good luck, -Martin : Hi folks, : : How with "ip route" to route source address? : : for example I want to route an internal (local) address to go via : specific gateway? : : Thank you : : Rimas : -- Martin A. Brown --- SecurePipe, Inc. --- mabrown@securepipe.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
