Hi, Thanks for the pointer. It was in fact the gateways to/from the Linux box not being defined correctly that caused the confusion and no-function of the routing. All no in place and working. Many thanks. John. >>> -----Original Message----- >>> From: Zubio Ancartone [mailto:z@adsl-213-190-47-193.takas.lt] >>> Sent: 25 September 2002 20:41 >>> To: john@dallambarn.freeserve.co.uk >>> Subject: Re: Routing and Shaping using RedHat7.3 >>> >>> >>> On Wednesday 25 September 2002 16:12, John Cushnie wrote: >>> >>> What is your "remote host" default gateway? Do tcpdump on eth0. >>> >>> > Hi all, >>> > >>> > I'm running RH7.3 plus errata. >>> > I've read through the HowTo and I had something like this >>> > configuration working on RH7.1, but it looks like the >>> interface to IP >>> > and ROUTE has changed considerably since then..... >>> > >>> > I'm trying to set up a simple router configuration to >>> route between >>> > subnets, as shown in the diagram. My aim is to provide >>> traffic shaping >>> > between the 194.80.34.0 hosts and the 148.88.0.0 and >>> 192.168.106.0 >>> > networks. >>> > <Snip> _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
