Hi, try to give the more specific filter a higher prio. if i understood "tc filter" right, the filters with higher prio are checked first. in you're setup giving the last filter line "prio 0" should do the job. > Hi guys I have a config as follows for one of my networks. I want to > give the xxx.xxx.xxx.xxx/xx network 64kbit for everything from the > internet but 8000kbit from our internal servers on yyy.yyy.yyy.yyy/yy > network. It does not work. I only want to use u32 filters. I think > what's happening is the first flowid of 1:21 is catching them and not > getting to the 1:40 flowid. Is this right? The box has to be between the > x network and the y network. > > tc qdisc del dev eth1 root handle 1: htb default 999 > tc qdisc add dev eth1 root handle 1: htb default 999 > tc class add dev eth1 parent 1: classid 1:1 htb rate 10000kbit > tc class add dev eth1 parent 1:1 classid 1:999 htb rate 1000kbit ceil > 10000kbit tc qdisc add dev eth1 parent 1:999 handle 1999: sfq perturb > 10 > tc class add dev eth1 parent 1:1 classid 1:2 htb rate 10000kbit quantum > 1514 tc class add dev eth1 parent 1:2 classid 1:21 htb rate 64kbit > ceil 64kbit quantum 1514 tc class add dev eth1 parent 1:2 classid 1:40 > htb rate 8000kbit ceil 8000kbit quantum 757000 tc qdisc add dev eth1 > parent 1:21 handle 2100: sfq perturb 10 > tc qdisc add dev eth1 parent 1:40 handle 4000: sfq perturb 10 > tc filter add dev eth1 protocol ip parent 1:0 prio 1 u32 match ip dst > xxx.xxx.xxx.xxx.xx flowid 1:21 tc filter add dev eth1 protocol ip > parent 1:0 prio 1 u32 match ip src yyy.yyy.yyy.yyy/yy match ip dst > xxx.xxx.xxx.xxx/xx flowid 1:40 > > Regards Allan Gee > Equation > 021 4181777 > www.equation.co.za > ,S 隊Xb߿L)Y=jyaffvZ_j)fjb?sY3iZ( _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
