On Tuesday 13 August 2002 17:41, Petre Bandac wrote:
> I want to shape the traffic on the http port and further on shape it if the
> destination ip is on some network I specify
>
> however, only the first rule is applied ... why ?
Because you add both rules to the same parent. When one rule is matched, the
packet is put in the destination class and the other rule is never matched.
Atach the second rule to class 1:11 with option "parent 1:11" and it should
work.
Stef
> #http
> $filtru prio 1 u32 match ip sport 80 0xffff flowid 1:11
> #droop :-)
> $filtru prio 1 u32 match ip src x.x.x.x \
> match ip dst x.x.x.0/24 flowid 1:13
>
> where classes are defined earlier as
>
> $tc class add dev eth0 parent 1:1 classid 1:10 \
> htb rate 32kbit ceil 32kbit
>
> $tc class add dev eth0 parent 1:1 classid 1:11 \
> htb rate 64kbit ceil 64kbit
>
> $tc class add dev eth0 parent 1:1 classid 1:12 \
> htb rate 128kbit ceil 160kbit
>
> $tc class add dev eth0 parent 1:1 classid 1:13 \
> htb rate 100kbit ceil 100kbit
>
> and
>
> filtru="$tc filter add dev eth0 protocol ip \
> parent 1:0"
>
>
> thanks in advance,
>
> petre
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
