Heh I solved the "problem" with a litle filters modification, see below: On Thu, 1 Aug 2002, Mihai RUSU wrote: > Hi > > I tryed to use a htb qdisc/class on top of another htb qdisc/class as you > can see bellow: > #!/bin/bash > > tc="/sbin/tc" > > $tc qdisc del dev eth0 root > $tc qdisc add dev eth0 root handle 1: htb default 40 > $tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbit burst 15k > > $tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50Mbit burst 15k > $tc class add dev eth0 parent 1:1 classid 1:20 htb rate 256Kbit burst 15k > $tc class add dev eth0 parent 1:1 classid 1:30 htb rate 50Mbit ceil 100Mbit burst 15k > > $tc qdisc add dev eth0 parent 1:10 handle 10: htb default 20 > $tc class add dev eth0 parent 10: classid 10:1 htb rate 50Mbit burst 15k > > $tc class add dev eth0 parent 10:1 classid 10:10 htb rate 256Kbit > $tc class add dev eth0 parent 10:1 classid 10:20 htb rate 1Mbit ceil 50Mbit > > $tc filter add dev eth0 parent 1: protocol ip u32 match ip dst 1.2.3.4/32 flowid 10:10 > replaced the line above with: $tc filter add dev eth0 parent 1: protocol ip u32 match ip dst 0.0.0.0/0 flowid 1:10 $tc filter add dev eth0 parent 10: protocol ip u32 match ip dst 1.2.3.4/32 flowid 10:10 ---------------------------- Mihai RUSU Disclaimer: Any views or opinions presented within this e-mail are solely those of the author and do not necessarily represent those of any company, unless otherwise specifically stated. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
