Re: Bridge with Traffic shaping

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



what kinda bridge are you using?
bridge-nf? if you are it says it only supports iptables, you would have to
mark the packets then use filter to put the marked packets into teh correct
queue for managing
----- Original Message -----
From: "Roché Compaan" <roche@upfrontsystems.co.za>
To: "Stef Coene" <stef.coene@docum.org>; <lartc@mailman.ds9a.nl>
Sent: Sunday, July 28, 2002 10:27 PM
Subject: RE:  Bridge with Traffic shaping



> On Saturday 27 July 2002 19:56, Roché Compaan wrote:
> > Hi,
> >
> > I am fairly new to routing and traffic control but I with the
> > help of the lartc howto I managed to setup a bridge with htb
> > traffic control.  The traffic shapping does not seem to work
> > as I expected and I would really appreciate if somebody
> > can tell my why this is the case.
> >
> > My setup:
> > I have a DSL router connecting a /28 network to the internet.
> > I put a linux box with 2 ethernet cards between my router and
> > the rest of the subnet.  I set up the linux box as an ethernet
> > bridge where the 2 ethernet cards has no ip address and the
> > bridge has an ip address.  I patched the kernel with the IMQ
> > patch so that I can shape incoming traffic.  eth0 is connected
> > to the router and eth1 is connect to the rest of the public
> > subnet.  I have an iptables rule that routes all traffic on eth1
> > to the imq device.

> If you put all incoming traffic on eth1 in the imq device, why
> don't you use
> the outgoing traffic on eth0 do the same shaping?  All traffic
> entering the
> box on eth1 leaves the box on eth0.  That way you don't need the
> imq device.

If I understand correctly I can shape incoming traffic by setting
up a qdisc on eth0 and filters that match any of the ip addresses
in my public subnet sitting behind the linux box that currently does
the traffic shaping.

Ok, I tried this but all traffic still seems to match only the default
htb class.

Here's my tc script:

#!/bin/bash
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 12

tc class add dev eth0 parent 1: classid 1:1 htb rate 128kbit ceil 128kbit
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 64kbit ceil 128kbit
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 32kbit ceil 128kbit
tc class add dev eth0 parent 1:1 classid 1:12 htb rate 32kbit ceil 128kbit

tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
    match ip dst 196.xx.yy.53 flowid 1:10
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
    match ip dst 196.xx.yy.54 flowid 1:10
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
    match ip dst 196.xx.yy.55 flowid 1:10

tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
    match ip dst 196.xx.yy.51 flowid 1:11
tc filter add dev eth0 parent 1: protocol ip prio 1 u32 \
    match ip dst 196.xx.yy.52 flowid 1:11

And this is the ouput of "tc -s -d class show dev eth0":

class htb 1:1 root prio 0 rate 128Kbit ceil 128Kbit burst 1753b/8 mpu 0b
cburst 1753b/8 mpu 0b quantum 1638 level 3
 Sent 83954 bytes 576 pkts (dropped 0, overlimits 0)
 rate 30bps
 lended: 114 borrowed: 0 giants: 0 injects: 0
 tokens: 101 ctokens: 101

class htb 1:10 parent 1:1 prio 0 rate 64Kbit ceil 128Kbit burst 1679b/8 mpu
0b cburst 1753b/8 mpu 0b quantum 819 level 0
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
 lended: 0 borrowed: 0 giants: 0 injects: 0
 tokens: 205 ctokens: 107

class htb 1:12 parent 1:1 prio 0 rate 32Kbit ceil 128Kbit burst 1638b/8 mpu
0b cburst 1753b/8 mpu 0b quantum 409 level 0
 Sent 12864 bytes 215 pkts (dropped 0, overlimits 0)
 rate 30bps
 lended: 215 borrowed: 0 giants: 0 injects: 0
 tokens: 387 ctokens: 104

class htb 1:11 parent 1:1 prio 0 rate 32Kbit ceil 128Kbit burst 1638b/8 mpu
0b cburst 1753b/8 mpu 0b quantum 409 level 0
 Sent 71090 bytes 361 pkts (dropped 0, overlimits 97)
 lended: 247 borrowed: 114 giants: 0 injects: 0
 tokens: 373 ctokens: 101

No packets seem to match any of the other classes although tcpdump
confirms that there are definitely traffic destined for the ip addresses
mentioned in my filters.

--
Roché Compaan
Upfront Systems http://www.upfrontsystems.co.za

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux