What version of HTB do you use ? Send me tc -s -d class show dev xxx outoput after test pic5 generation. devik On Fri, 7 Jun 2002, King Yung Tong wrote: > Thank you again for you help! > Attach is the pic5 for the ceil equal to 100kbps for all line. > pic10limit for the ceil equal to 100kbps except 1:20. > > My objective is to show if not prio is set the excess should allocate > according to rate. If the prio is set, the high prio should get more. > > > > > > On Fri, 7 Jun 2002, Martin Devera wrote: > > > > Thank you for you answer, 1:10 is incresed but 1:20 is also increased and > > > increase to the specific rate if I add 100kbps to every line. > > > > sounds weird. With higher prio 1:10 should get 90k and 1:11 10k. > > > > > In my case, I would like to put all the extra to 1:10 only, is that means > > > I have to give 1:11 ceil to 10kbps. If it is, is that means I don't need > > > prio paramter? How prio parameter works? > > > > your understanding is ok, tge ceil 10k is correct - the prio is > > meant for lowering delay and change in excess distribution is > > only "secondary" product. > > > > Port the resulting graph somewhere so I can look at it. > > > > devik > > > > _______________________________________________ > > LARTC mailing list / LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/