you set both directions to use the same htb. Am I right ? Which kind of line, 11kBbs .. what is it ?? On 6 Jun 2002, josh wrote: > hi there! > > For weeks I am trying to set my network in such a way: > > server (linux) is connected through ppp0 to internet. There is MLDonkey running on that and it is also Internet default gateway for my LAN. I want as fast access to the Internet as there would be no MLDonkey running - I mean: > > >> I want MLDonkey to be using ONLY IDLE BANDWIDTH << > > After reading HTB manual I configured it in this way: > > --------------------------- > tc qdisc add dev imq0 root handle 1: htb default 10 > tc class add dev imq0 parent 1: classid 1:1 htb rate 70kbit > > tc class add dev imq0 parent 1:1 classid 1:10 htb rate 70kbit prio 0 > tc class add dev imq0 parent 1:1 classid 1:11 htb rate 10kbit ceil 70kbit prio 2 > > tc filter add dev imq0 protocol ip parent 1:0 prio 1 u32 \ > match ip sport 4662 0xffff flowid 1:11 > tc filter add dev imq0 protocol ip parent 1:0 prio 1 u32 \ > match ip dport 4662 0xffff flowid 1:11 > > ip link set imq0 up > --------------------------- > > So I want MLdonkey to be using low-priority class, becouse I want have fast connection when I am browsing WWW or doing anything else. > > Here you can see output of > tc -s -d class show dev imq0 > when there is only MLDonkey running: > ---------------------------------- > http://josh876.republika.pl/class.txt > ---------------------------------- > Looking at class.txt it seems it should be working very well, but it is not!!! :-((( > > Here you can see output of > netstat -n > ---------------------------------- > http://josh876.republika.pl/netstat.txt > ---------------------------------- > > It seems to be hard to fight with such an amount of opened connections (4662), but it was not written anywhere that HTB would not be able to handle that... > > When I am browsing WWW it is almost as slow as there would be no HTB at all. > > Why is that??? What is wrong? > > -josh > > p.s. > I set HTB to 70kbit, which is 8,75kB/s. > My connection's maximum speed is about 11,2kB/s. > (my tests) > > I did write that, becouse many of you would say that all this is becouse queues are growing in my modem - which can not be true.,S > f˘)ŕ+-ü°L)YŰ=jyaśÚ~˙ůYŰ=jy¨ĽŠ˙+-wčţVŤľÁÎY3žŰiű˙ĺjť\˘¸? _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
