George Tsuladze wrote: > tc qdisc del dev eth0 root > #eht0 rules > tc qdisc add dev eth0 root handle 1: htb default 12 > #shape interface eth0 > tc class add dev eth0 parent 1: classid 1:1 htb rate 10mbit ceil > 10mbit burst 2k > #Internet > tc class add dev eth0 parent 1:1 classid 1:11 htb rate 500kbit ceil > 500kbit burst 2k > #Lan > tc class add dev eth0 parent 1:1 classid 1:12 htb rate 10mbit ceil > 10mbit burst 2k > #mark Internet class > tc filter add dev eth0 parent 1: protocol ip prio 3 handle 1 fw > classid 1:11 > #add qdisc discipline Lan > tc qdisc add dev eth0 parent 1:12 handle 32: sfq perturb 10 > #add qdisc discipline Internet > tc qdisc add dev eth0 parent 1:11 handle 41: sfq perturb 10 > ################################################################################### > > #fitler marks by iptables > #iptables output > iptables -F -t mangle > #Mark Internet traffic > iptables -A OUTPUT -t mangle -d $myip -j MARK --set-mark 1 > > with this rule it shapes traffic for marked ip and gives all other 10 > mbit > > but i do not want this, > iptables -A OUTPUT -t mangle -d $myip -s ! $routerip -j MARK > --set-mark 1 > > it does not shapes internet traffic, it gaves 10mbit to all. > > i am downloading from internet without shaping, note i am downloading > through the SQUID which is running on router. > > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > . > Were i am doing wrong?
