This patch contains the following two changes:
1. Fix the bug in nested preemption timer support. If vmexit L2->L0
with some reasons not emulated by L1, preemption timer value should
be save in such exits.
2. Add support of "Save VMX-preemption timer value" VM-Exit controls
to nVMX.
With this patch, nested VMX preemption timer features are fully
supported.
Signed-off-by: Arthur Chunqi Li <yzt356@xxxxxxxxx>
---
This series depends on queue.
arch/x86/include/uapi/asm/msr-index.h | 1 +
arch/x86/kvm/vmx.c | 51 ++++++++++++++++++++++++++++++---
2 files changed, 48 insertions(+), 4 deletions(-)
diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h
index bb04650..b93e09a 100644
--- a/arch/x86/include/uapi/asm/msr-index.h
+++ b/arch/x86/include/uapi/asm/msr-index.h
@@ -536,6 +536,7 @@
/* MSR_IA32_VMX_MISC bits */
#define MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS (1ULL << 29)
+#define MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE 0x1F
/* AMD-V MSRs */
#define MSR_VM_CR 0xc0010114
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 1f1da43..870caa8 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2204,7 +2204,14 @@ static __init void nested_vmx_setup_ctls_msrs(void)
#ifdef CONFIG_X86_64
VM_EXIT_HOST_ADDR_SPACE_SIZE |
#endif
- VM_EXIT_LOAD_IA32_PAT | VM_EXIT_SAVE_IA32_PAT;
+ VM_EXIT_LOAD_IA32_PAT | VM_EXIT_SAVE_IA32_PAT |
+ VM_EXIT_SAVE_VMX_PREEMPTION_TIMER;
+ if (!(nested_vmx_pinbased_ctls_high & PIN_BASED_VMX_PREEMPTION_TIMER))
+ nested_vmx_exit_ctls_high &=
+ (~VM_EXIT_SAVE_VMX_PREEMPTION_TIMER);
+ if (!(nested_vmx_exit_ctls_high & VM_EXIT_SAVE_VMX_PREEMPTION_TIMER))
+ nested_vmx_pinbased_ctls_high &=
+ (~PIN_BASED_VMX_PREEMPTION_TIMER);
nested_vmx_exit_ctls_high |= (VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR |
VM_EXIT_LOAD_IA32_EFER);
@@ -6707,6 +6714,23 @@ static void vmx_get_exit_info(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2)
*info2 = vmcs_read32(VM_EXIT_INTR_INFO);
}
+static void nested_adjust_preemption_timer(struct kvm_vcpu *vcpu)
+{
+ u64 delta_tsc_l1;
+ u32 preempt_val_l1, preempt_val_l2, preempt_scale;
+
+ preempt_scale = native_read_msr(MSR_IA32_VMX_MISC) &
+ MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE;
+ preempt_val_l2 = vmcs_read32(VMX_PREEMPTION_TIMER_VALUE);
+ delta_tsc_l1 = kvm_x86_ops->read_l1_tsc(vcpu,
+ native_read_tsc()) - vcpu->arch.last_guest_tsc;
+ preempt_val_l1 = delta_tsc_l1 >> preempt_scale;
+ if (preempt_val_l2 - preempt_val_l1 < 0)
+ preempt_val_l2 = 0;
+ else
+ preempt_val_l2 -= preempt_val_l1;
+ vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, preempt_val_l2);
+}
/*
* The guest has exited. See if we can fix it or if we need userspace
* assistance.
@@ -6716,6 +6740,7 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
struct vcpu_vmx *vmx = to_vmx(vcpu);
u32 exit_reason = vmx->exit_reason;
u32 vectoring_info = vmx->idt_vectoring_info;
+ int ret;
/* If guest state is invalid, start emulating */
if (vmx->emulation_required)
@@ -6795,12 +6820,15 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
if (exit_reason < kvm_vmx_max_exit_handlers
&& kvm_vmx_exit_handlers[exit_reason])
- return kvm_vmx_exit_handlers[exit_reason](vcpu);
+ ret = kvm_vmx_exit_handlers[exit_reason](vcpu);
else {
vcpu->run->exit_reason = KVM_EXIT_UNKNOWN;
vcpu->run->hw.hardware_exit_reason = exit_reason;
+ ret = 0;
}
- return 0;
+ if (is_guest_mode(vcpu))
+ nested_adjust_preemption_timer(vcpu);
+ return ret;
}
static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
@@ -7518,6 +7546,7 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
u32 exec_control;
+ u32 exit_control;
vmcs_write16(GUEST_ES_SELECTOR, vmcs12->guest_es_selector);
vmcs_write16(GUEST_CS_SELECTOR, vmcs12->guest_cs_selector);
@@ -7691,7 +7720,10 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
* we should use its exit controls. Note that VM_EXIT_LOAD_IA32_EFER
* bits are further modified by vmx_set_efer() below.
*/
- vmcs_write32(VM_EXIT_CONTROLS, vmcs_config.vmexit_ctrl);
+ exit_control = vmcs_config.vmexit_ctrl;
+ if (vmcs12->pin_based_vm_exec_control & PIN_BASED_VMX_PREEMPTION_TIMER)
+ exit_control |= VM_EXIT_SAVE_VMX_PREEMPTION_TIMER;
+ vmcs_write32(VM_EXIT_CONTROLS, exit_control);
/* vmcs12's VM_ENTRY_LOAD_IA32_EFER and VM_ENTRY_IA32E_MODE are
* emulated by vmx_set_efer(), below.
@@ -8090,6 +8122,17 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
vmcs12->guest_pending_dbg_exceptions =
vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS);
+ if (vmcs12->pin_based_vm_exec_control &
+ PIN_BASED_VMX_PREEMPTION_TIMER) {
+ if (vmcs12->vm_exit_controls &
+ VM_EXIT_SAVE_VMX_PREEMPTION_TIMER)
+ vmcs12->vmx_preemption_timer_value =
+ vmcs_read32(VMX_PREEMPTION_TIMER_VALUE);
+ else
+ vmcs_write32(VMX_PREEMPTION_TIMER_VALUE,
+ vmcs12->vmx_preemption_timer_value);
+ }
+
/*
* In some cases (usually, nested EPT), L2 is allowed to change its
* own CR3 without exiting. If it has changed it, we must keep it.
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
