>From the fedora 19 host: [root@fedora ~]# sg_inq /dev/sdc standard INQUIRY: PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 [RelAdr=0] WBus16=1 Sync=1 Linked=0 [TranDis=0] CmdQue=1 length=36 (0x24) Peripheral device type: disk Vendor identification: MacroSAN Product identification: LU Product revision level: 1.0 Unit serial number: fd01ece6-8540-f4c7-0000-fe170142b300 >From the fedora 19 vm: [root@fedoravm ~]# sg_inq /dev/sdb standard INQUIRY: PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 [RelAdr=0] WBus16=1 Sync=1 Linked=0 [TranDis=0] CmdQue=1 length=36 (0x24) Peripheral device type: disk Vendor identification: MacroSAN Product identification: LU Product revision level: 1.0 Unit serial number: fd01ece6-8540-f4c7-0000-fe170142b300 The result from fedora 19 host and fedora 19 vm are the same. It's that means I got a wrong windows vm scsi pass-through driver? Or is there any tool like sg_inq in windows 2008? On Tue, Aug 20, 2013 at 8:09 PM, Paolo Bonzini <pbonzini@xxxxxxxxxx> wrote: > Il 20/08/2013 13:43, Timon Wang ha scritto: >> Thanks, the whole iSCSI LUN have been passed to the VM. >> >> But I test it with scsicmd, and found that the driver may be not >> support SPC-3, but if i use this by microsoft iscsi initiator, I can >> pass all the scsi3_test tests. > > If you are passing the LUN to the VM with device='lun', the driver and > VMM do not interpret any SCSI command. You should see exactly the same > data as in the host, which includes support for SPC-3: > >>>> [root@localhost /]# sg_inq /dev/VM-IMAGES-BACKUP-DO-NOT-REMOVE/q_disk >>>> standard INQUIRY: >>>> PQual=0 Device_type=0 RMB=0 version=0x05 [SPC-3] >>>> [AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=0 >>>> SCCS=1 ACC=0 TPGS=1 3PC=0 Protect=0 [BQue=0] >>>> EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0 >>>> [RelAdr=0] WBus16=1 Sync=1 Linked=0 [TranDis=0] CmdQue=1 >>>> length=36 (0x24) Peripheral device type: disk >>>> Vendor identification: MacroSAN >>>> Product identification: LU >>>> Product revision level: 1.0 >>>> Unit serial number: 0d9281ae-aea4-6da0-0000-02180142b300 > > Can you try using a Linux VM and executing sg_inq in the VM? > > Paolo > -- Focus on: Server Vitualization, Network security,Scanner,NodeJS,JAVA,WWW Blog: http://www.nohouse.net -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html