On Wed, Jun 05, 2013 at 01:57:16PM -0500, Anthony Liguori wrote:
> "Michael S. Tsirkin" <mst@xxxxxxxxxx> writes:
>
> > On Wed, Jun 05, 2013 at 10:46:15AM -0500, Anthony Liguori wrote:
> >> Look, it's very simple.
> > We only need to do it if we do a change that breaks guests.
> >
> > Please find a guest that is broken by the patches. You won't find any.
>
> I think the problem in this whole discussion is that we're talking past
> each other.
>
> Here is my understanding:
>
> 1) PCI-e says that you must be able to disable IO bars and still have a
> functioning device.
>
> 2) It says (1) because you must size IO bars to 4096 which means that
> practically speaking, once you enable a dozen or so PIO bars, you run
> out of PIO space (16 * 4k == 64k and not all that space can be used).
>
> virtio-pci uses a IO bars exclusively today. Existing guest drivers
> assume that there is an IO bar that contains the virtio-pci registers.
>
> So let's consider the following scenarios:
>
> QEMU of today:
>
> 1) qemu -drive file=ubuntu-13.04.img,if=virtio
>
> This works today. Does adding an MMIO bar at BAR1 break this?
> Certainly not if the device is behind a PCI bus...
>
> But are we going to put devices behind a PCI-e bus by default? Are we
> going to ask the user to choose whether devices are put behind a legacy
> bus or the express bus?
>
> What happens if we put the device behind a PCI-e bus by default? Well,
> it can still work. That is, until we do something like this:
>
> 2) qemu -drive file=ubuntu-13.04.img,if=virtio -device virtio-rng
> -device virtio-balloon..
>
> Such that we have more than a dozen or so devices. This works
> perfectly fine today. It works fine because we've designed virtio to
> make sure it works fine. Quoting the spec:
>
> "Configuration space is generally used for rarely-changing or
> initialization-time parameters. But it is a limited resource, so it
> might be better to use a virtqueue to update configuration information
> (the network device does this for filtering, otherwise the table in the
> config space could potentially be very large)."
>
> In fact, we can have 100s of PCI devices today without running out of IO
> space because we're so careful about this.
>
> So if we switch to using PCI-e by default *and* we keep virtio-pci
> without modifying the device IDs, then very frequently we are going to
> break existing guests because the drivers they already have no longer
> work.
>
> A few virtio-serial channels, a few block devices, a couple of network
> adapters, the balloon and RNG driver, and we hit the IO space limit
> pretty damn quickly so this is not a contrived scenario at all. I would
> expect that we frequently run into this if we don't address this problem.
>
> So we have a few options:
>
> 1) Punt all of this complexity to libvirt et al and watch people make
> the wrong decisions about when to use PCI-e. This will become yet
> another example of KVM being too hard to configure.
>
> 2) Enable PCI-e by default and just force people to upgrade their
> drivers.
>
> 3) Don't use PCI-e by default but still add BAR1 to virtio-pci
>
> 4) Do virtio-pcie, make it PCI-e friendly (drop the IO BAR completely), give
> it a new device/vendor ID. Continue to use virtio-pci for existing
> devices potentially adding virtio-{net,blk,...}-pcie variants for
> people that care to use them.
For the record, with respect to PCI-e discussion, I have no
problem with the idea of changing the device ID or
revision id and asking guests to upgrade if they
want to use a pcie device.
That's not exactly 4 however.
I see no reason to couple PCI-e with MMIO discussion,
that's just one of the reasons to support MMIO.
> I think 1 == 2 == 3 and I view 2 as an ABI breaker. libvirt does like
> policy so they're going to make a simple decision and always use the
> same bus by default. I suspect if we made PCI the default, they might
> just always set the PCI-e flag just because.
>
> There are hundreds of thousands if not millions of guests with existing
> virtio-pci drivers. Forcing them to upgrade better have an extremely
> good justification.
>
> I think 4 is the best path forward. It's better for users (guests
> continue to work as they always have). There's less confusion about
> enabling PCI-e support--you must ask for the virtio-pcie variant and you
> must have a virtio-pcie driver. It's easy to explain.
>
> It also maps to what regular hardware does. I highly doubt that there
> are any real PCI cards that made the shift from PCI to PCI-e without
> bumping at least a revision ID.
>
> It also means we don't need to play games about sometimes enabling IO
> bars and sometimes not.
>
> Regards,
>
> Anthony Liguori
>
> >
> >
> > --
> > MST
> > --
> > To unsubscribe from this list: send the line "unsubscribe kvm" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
