On 12/02/13 09:17, Alex Williamson wrote:
On Mon, 2013-02-11 at 22:54 +1100, Alexey Kardashevskiy wrote:
VFIO implements platform independent stuff such as
a PCI driver, BAR access (via read/write on a file descriptor
or direct mapping when possible) and IRQ signaling.
The platform dependent part includes IOMMU initialization
and handling. This patch implements an IOMMU driver for VFIO
which does mapping/unmapping pages for the guest IO and
provides information about DMA window (required by a POWERPC
guest).
The counterpart in QEMU is required to support this functionality.
Revision info would be great here too.
>
Cc: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alexey Kardashevskiy <aik@xxxxxxxxx>
---
drivers/vfio/Kconfig | 6 +
drivers/vfio/Makefile | 1 +
drivers/vfio/vfio_iommu_spapr_tce.c | 269 +++++++++++++++++++++++++++++++++++
include/uapi/linux/vfio.h | 31 ++++
4 files changed, 307 insertions(+)
create mode 100644 drivers/vfio/vfio_iommu_spapr_tce.c
diff --git a/drivers/vfio/Kconfig b/drivers/vfio/Kconfig
index 7cd5dec..b464687 100644
--- a/drivers/vfio/Kconfig
+++ b/drivers/vfio/Kconfig
@@ -3,10 +3,16 @@ config VFIO_IOMMU_TYPE1
depends on VFIO
default n
+config VFIO_IOMMU_SPAPR_TCE
+ tristate
+ depends on VFIO && SPAPR_TCE_IOMMU
+ default n
+
menuconfig VFIO
tristate "VFIO Non-Privileged userspace driver framework"
depends on IOMMU_API
select VFIO_IOMMU_TYPE1 if X86
+ select VFIO_IOMMU_SPAPR_TCE if PPC_POWERNV
help
VFIO provides a framework for secure userspace device drivers.
See Documentation/vfio.txt for more details.
diff --git a/drivers/vfio/Makefile b/drivers/vfio/Makefile
index 2398d4a..72bfabc 100644
--- a/drivers/vfio/Makefile
+++ b/drivers/vfio/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_VFIO) += vfio.o
obj-$(CONFIG_VFIO_IOMMU_TYPE1) += vfio_iommu_type1.o
+obj-$(CONFIG_VFIO_IOMMU_SPAPR_TCE) += vfio_iommu_spapr_tce.o
obj-$(CONFIG_VFIO_PCI) += pci/
diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c
new file mode 100644
index 0000000..9b3fa88
--- /dev/null
+++ b/drivers/vfio/vfio_iommu_spapr_tce.c
@@ -0,0 +1,269 @@
+/*
+ * VFIO: IOMMU DMA mapping support for TCE on POWER
+ *
+ * Copyright (C) 2012 IBM Corp. All rights reserved.
2013 now
+ * Author: Alexey Kardashevskiy <aik@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from original vfio_iommu_type1.c:
+ * Copyright (C) 2012 Red Hat, Inc. All rights reserved.
+ * Author: Alex Williamson <alex.williamson@xxxxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/err.h>
+#include <linux/vfio.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+
+#define DRIVER_VERSION "0.1"
+#define DRIVER_AUTHOR "aik@xxxxxxxxx"
+#define DRIVER_DESC "VFIO IOMMU SPAPR TCE"
+
+static void tce_iommu_detach_group(void *iommu_data,
+ struct iommu_group *iommu_group);
+
+/*
+ * VFIO IOMMU fd for SPAPR_TCE IOMMU implementation
+ *
+ * This code handles mapping and unmapping of user data buffers
+ * into DMA'ble space using the IOMMU
+ */
+
+/*
+ * The container descriptor supports only a single group per container.
+ * Required by the API as the container is not supplied with the IOMMU group
+ * at the moment of initialization.
+ */
+struct tce_container {
+ struct mutex lock;
+ struct iommu_table *tbl;
+};
+
+static void *tce_iommu_open(unsigned long arg)
+{
+ struct tce_container *container;
+
+ if (arg != VFIO_SPAPR_TCE_IOMMU) {
+ pr_err("tce_vfio: Wrong IOMMU type\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ container = kzalloc(sizeof(*container), GFP_KERNEL);
+ if (!container)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_init(&container->lock);
+
+ return container;
+}
+
+static void tce_iommu_release(void *iommu_data)
+{
+ struct tce_container *container = iommu_data;
+
+ WARN_ON(container->tbl && !container->tbl->it_group);
+ if (container->tbl && container->tbl->it_group)
+ tce_iommu_detach_group(iommu_data, container->tbl->it_group);
+
+ mutex_destroy(&container->lock);
+
+ kfree(container);
+}
+
+static long tce_iommu_ioctl(void *iommu_data,
+ unsigned int cmd, unsigned long arg)
+{
+ struct tce_container *container = iommu_data;
+ unsigned long minsz;
+ long ret;
+
+ switch (cmd) {
+ case VFIO_CHECK_EXTENSION:
+ return (arg == VFIO_SPAPR_TCE_IOMMU) ? 1 : 0;
+
+ case VFIO_IOMMU_SPAPR_TCE_GET_INFO: {
+ struct vfio_iommu_spapr_tce_info info;
+ struct iommu_table *tbl = container->tbl;
+
+ if (WARN_ON(!tbl))
+ return -ENXIO;
+
+ minsz = offsetofend(struct vfio_iommu_spapr_tce_info,
+ dma32_window_size);
+
+ if (copy_from_user(&info, (void __user *)arg, minsz))
+ return -EFAULT;
+
+ if (info.argsz < minsz)
+ return -EINVAL;
+
+ info.dma32_window_start = tbl->it_offset << IOMMU_PAGE_SHIFT;
+ info.dma32_window_size = tbl->it_size << IOMMU_PAGE_SHIFT;
+ info.flags = 0;
+
+ if (copy_to_user((void __user *)arg, &info, minsz))
+ return -EFAULT;
+
+ return 0;
+ }
+ case VFIO_IOMMU_MAP_DMA: {
+ vfio_iommu_spapr_tce_dma_map param;
+ struct iommu_table *tbl = container->tbl;
+ unsigned long tce;
+
+ if (WARN_ON(!tbl))
+ return -ENXIO;
+
+ minsz = offsetofend(vfio_iommu_spapr_tce_dma_map, size);
+
+ if (copy_from_user(¶m, (void __user *)arg, minsz))
+ return -EFAULT;
+
+ if (param.argsz < minsz)
+ return -EINVAL;
+
+ if (param.flags & ~(VFIO_DMA_MAP_FLAG_READ |
+ VFIO_DMA_MAP_FLAG_WRITE))
+ return -EINVAL;
+
+ if ((param.size & ~IOMMU_PAGE_MASK) ||
+ (param.vaddr & ~IOMMU_PAGE_MASK))
+ return -EINVAL;
+
+ /* TODO: support multiple TCEs */
+ if (param.size != IOMMU_PAGE_SIZE) {
Ouch, ioctl per page...
Well, there is something to discuss.
On POWER, there is an interface to add multiple pages at once but the guest
does not supply the range of guest phys addresses, it puts some addresses
to a small page (so it is up to 512 pages at once) and passes this address
to the host as a parameter.
I posted another series yesterday but forgot to cc: you :) You can find
them here - http://patchwork.ozlabs.org/patch/219592/ (emulated devices)
and http://patchwork.ozlabs.org/patch/219594/ (vfio). There I convert guest
phys address (real and virtual mode are handled different ways) and call
iommu_put_tce_user_mode() (or analog) in a loop.
Either way, I did some tests with 10Gb card and without real mode stuff it
does 220MB/s, and even if I do multi-tce it won't be faster than ~400MB/s
which is still not enough as the real mode code makes it 1020MB/s. Slower
devices work on the same speed no matter what.
+ pr_err("VFIO map on POWER supports only %lu page size\n",
+ IOMMU_PAGE_SIZE);
+ return -EINVAL;
+ }
+
+ /* iova is checked by the IOMMU API */
+ tce = param.vaddr;
+ if (param.flags & VFIO_DMA_MAP_FLAG_READ)
+ tce |= TCE_PCI_READ;
+ if (param.flags & VFIO_DMA_MAP_FLAG_WRITE)
+ tce |= TCE_PCI_WRITE;
+
+ ret = iommu_put_tce_user_mode(tbl, param.iova, tce);
+ iommu_flush_tce(tbl);
+
+ return ret;
+ }
+ case VFIO_IOMMU_UNMAP_DMA: {
+ vfio_iommu_spapr_tce_dma_unmap param;
+ struct iommu_table *tbl = container->tbl;
+
+ if (WARN_ON(!tbl))
+ return -ENXIO;
+
+ minsz = offsetofend(vfio_iommu_spapr_tce_dma_unmap, size);
+
+ if (copy_from_user(¶m, (void __user *)arg, minsz))
+ return -EFAULT;
+
+ if (param.argsz < minsz)
+ return -EINVAL;
+
+ /* No flag is supported now */
+ if (param.flags)
+ return -EINVAL;
+
+ if (param.size & ~IOMMU_PAGE_MASK)
+ return -EINVAL;
But you support multi-page unmaps?
Yes, this is a lot easier :)
+ /* iova is checked by the IOMMU API */
+ ret = iommu_clear_tce_user_mode(tbl, param.iova, 0,
+ param.size >> IOMMU_PAGE_SHIFT);
+ iommu_flush_tce(tbl);
+
+ return ret;
+ }
+ }
+
+ return -ENOTTY;
+}
+
+static int tce_iommu_attach_group(void *iommu_data,
+ struct iommu_group *iommu_group)
+{
+ int ret;
+ struct tce_container *container = iommu_data;
+ struct iommu_table *tbl = iommu_group_get_iommudata(iommu_group);
+
+ BUG_ON(!tbl);
+ mutex_lock(&container->lock);
+ pr_debug("tce_vfio: Attaching group #%u to iommu %p\n",
+ iommu_group_id(iommu_group), iommu_group);
+ if (container->tbl) {
+ pr_warn("tce_vfio: Only one group per IOMMU container is allowed, existing id=%d, attaching id=%d\n",
+ iommu_group_id(container->tbl->it_group),
+ iommu_group_id(iommu_group));
+ mutex_unlock(&container->lock);
+ return -EBUSY;
+ }
+
+ container->tbl = tbl;
+ ret = iommu_lock_table(tbl, true);
Bug, container->tbl is set regardless of iommu_lock_table.
Oops, bug.
Ok, so now we're checking rlimits and handling page accounting on
VFIO_GROUP_SET_CONTAINER to avoid any overhead at map/unmap. How can
the user learn tbl->it_size to set their locked page limit prior to
this? It's available from GET_INFO, but there's a chicken and egg
problem that to get it there you have to get past this, which means
you're already ok. Maybe it's in sysfs somewhere already or it could be
exposed in the iommu group like the name attribute. Otherwise we might
consider doing locking on first mapping. Thanks,
GET_INFO is called in the beginning so QEMU will exit right there. No real
work will have been done till that moment so what is the problem?
Alex
+ mutex_unlock(&container->lock);
+
+ return ret;
+}
+
+static void tce_iommu_detach_group(void *iommu_data,
+ struct iommu_group *iommu_group)
+{
+ struct tce_container *container = iommu_data;
+ struct iommu_table *tbl = iommu_group_get_iommudata(iommu_group);
+
+ BUG_ON(!tbl);
+ mutex_lock(&container->lock);
+ if (tbl != container->tbl) {
+ pr_warn("tce_vfio: detaching group #%u, expected group is #%u\n",
+ iommu_group_id(iommu_group),
+ iommu_group_id(tbl->it_group));
+ } else {
+
+ pr_debug("tce_vfio: detaching group #%u from iommu %p\n",
+ iommu_group_id(iommu_group), iommu_group);
+
+ container->tbl = NULL;
+ iommu_lock_table(tbl, false);
+ }
+ mutex_unlock(&container->lock);
+}
+
+const struct vfio_iommu_driver_ops tce_iommu_driver_ops = {
+ .name = "iommu-vfio-powerpc",
+ .owner = THIS_MODULE,
+ .open = tce_iommu_open,
+ .release = tce_iommu_release,
+ .ioctl = tce_iommu_ioctl,
+ .attach_group = tce_iommu_attach_group,
+ .detach_group = tce_iommu_detach_group,
+};
+
+static int __init tce_iommu_init(void)
+{
+ return vfio_register_iommu_driver(&tce_iommu_driver_ops);
+}
+
+static void __exit tce_iommu_cleanup(void)
+{
+ vfio_unregister_iommu_driver(&tce_iommu_driver_ops);
+}
+
+module_init(tce_iommu_init);
+module_exit(tce_iommu_cleanup);
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 4758d1b..ea9a9a7 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -22,6 +22,7 @@
/* Extensions */
#define VFIO_TYPE1_IOMMU 1
+#define VFIO_SPAPR_TCE_IOMMU 2
/*
* The IOCTL interface is designed for extensibility by embedding the
@@ -365,4 +366,34 @@ struct vfio_iommu_type1_dma_unmap {
#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
+/* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
+
+/*
+ * The SPAPR TCE info struct provides the information about the PCI bus
+ * address ranges available for DMA, these values are programmed into
+ * the hardware so the guest has to know that information.
+ *
+ * The DMA 32 bit window start is an absolute PCI bus address.
+ * The IOVA address passed via map/unmap ioctls are absolute PCI bus
+ * addresses too so the window works as a filter rather than an offset
+ * for IOVA addresses.
+ *
+ * A flag will need to be added if other page sizes are supported,
+ * so as defined here, it is always 4k.
+ */
+struct vfio_iommu_spapr_tce_info {
+ __u32 argsz;
+ __u32 flags; /* reserved for future use */
+ __u32 dma32_window_start; /* 32 bit window start (bytes) */
+ __u32 dma32_window_size; /* 32 bit window size (bytes) */
+};
+
+#define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+/* Reuse type1 map/unmap structs as they are the same at the moment */
+typedef struct vfio_iommu_type1_dma_map vfio_iommu_spapr_tce_dma_map;
+typedef struct vfio_iommu_type1_dma_unmap vfio_iommu_spapr_tce_dma_unmap;
+
+/* ***************************************************************** */
+
#endif /* _UAPIVFIO_H */
--
Alexey
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
