On Tue, 2013-02-05 at 08:37 -0700, Alex Williamson wrote: > On Tue, 2013-02-05 at 14:31 +0100, David Gstir wrote: > > Am Montag, den 04.02.2013, 08:49 -0700 schrieb Alex Williamson: > > > > > Can you clarify what you mean by assign? Are you actually assigning the > > > root ports to the qemu guest (1c.0 & 1c.6)? vfio will require they be > > > owned by vfio-pci to make use of 3:00.0, but assigning them to the guest > > > is not recommended. Can you provided your qemu command line? > > > > I did hand all of them to the guest OS. Removing 1c.0 & 1c.6 from the qemu > > command line seems to have done the trick. Thanks! > > Great, though I'm still not sure how we were generating those DMAR > faults. > > > Here's my working qemu command line: > > qemu-kvm -no-reboot -enable-kvm -cpu host -smp 4 -m 6G \ > > -drive file=/home/test/qemu/images/win7_base_updated.qcow2,if=virtio,cache=none,media=disk,format=qcow2,index=0 \ > > -full-screen -no-quit -no-frame -display sdl -vnc :1 -k de -usbdevice tablet \ > > -vga std -global VGA.vgamem_mb=256 \ > > -netdev tap,id=guest0,ifname=tap0,script=no,downscript=no \ > > -net nic,netdev=guest0,model=virtio,macaddr=00:16:35:BE:EF:12 \ > > -rtc base=localtime \ > > -device vfio-pci,host=00:1b.0,id=audio \ > > -device vfio-pci,host=00:1a.0,id=ehci1 \ > > -device vfio-pci,host=00:1d.0,id=ehci2 \ > > -device vfio-pci,host=03:00.0,id=xhci1 \ > > -monitor tcp::5555,server,nowait > > > > > > > We need > > > to re-visit how to handle pcieport devices with vfio-pci, perhaps > > > white-listing it as a vfio "compatible" driver, but this still should > > > not interfere with devices external to the group. > > > > > > The DMAR fault address looks pretty bogus unless you happen to have > > > 100GB+ of ram in the system. > > > > Nope, definitely not. :) > > > > > vfio makes use of the IOMMU API for programming DMA translations, so an > > > reserved fields would have to be programmed by intel-iommu itself. We > > > could of course be passing some kind of bogus data that intel-iommu > > > isn't catching. If you're assigning the root ports to the guest, I'd > > > start with that, don't do it. Attach them to vfio, but don't give them > > > to the guest. Maybe that'll give us a hint. I also notice that your > > > USB 3 controller is dead: > > > > > > 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev ff) (prog-if ff) > > > !!! Unknown header type 7f > > > > > > We only see unknown header type 7f when the read from the device returns > > > -1. This might have something to do with the root port above it (1c.6) > > > being in state D3. Windows likes to put unused devices in D3, which > > > leads me to suspect you are giving it to the guest. > > > > There error does no longer occur. lspci now shows this: > > > > -- snip -- > > 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) (prog-if 30 [XHCI]) > > Subsystem: Intel Corporation Device 2008 > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > > Interrupt: pin A routed to IRQ 18 > > Region 0: Memory at fe500000 (64-bit, non-prefetchable) [disabled] [size=8K] > > Capabilities: [50] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ > > Address: 0000000000000000 Data: 0000 > > Capabilities: [90] MSI-X: Enable- Count=8 Masked- > > Vector table: BAR=0 offset=00001000 > > PBA: BAR=0 offset=00001080 > > Capabilities: [a0] Express (v2) Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > > LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited > > ClockPM+ Surprise- LLActRep- BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > DevCap2: Completion Timeout: Not Supported, TimeoutDis+ > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- > > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > > Compliance De-emphasis: -6dB > > LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- > > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- > > Capabilities: [100 v1] Advanced Error Reporting > > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > > Capabilities: [140 v1] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff > > Capabilities: [150 v1] Latency Tolerance Reporting > > Max snoop latency: 0ns > > Max no snoop latency: 0ns > > Kernel driver in use: vfio-pci > > -- snip -- > > > > Most likely because I don't hand the root ports over to the guest anymore. > > However, there seems to be another issue with the USB 3 controller since > > windows 7 can't start the device (error 10 in windows device manager). Using > > these USB ports in the host linux worked fine. Could this issue be related to > > pci-express? > > Ugh, the infamous and useless error 10. It could be anything. I've got > a system with onboard usb3, let me see what windows does with it here > first. Thanks, Well, I've got an Etron USB3 HBA and (un)fortunately it works just fine with a Win7 guest. There's really nothing special about USB controllers from a PCI device assignment perspective. Have you tried the latest upstream qemu bits? Thanks, Alex -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html