> -----Original Message----- > From: Alex Williamson [mailto:alex.williamson@xxxxxxxxxx] > Sent: Wednesday, January 09, 2013 11:05 AM > To: Pandarathil, Vijaymohan R > Cc: Bjorn Helgaas; Gleb Natapov; kvm@xxxxxxxxxxxxxxx; qemu- > devel@xxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > Subject: Re: [PATCH 1/2] VFIO-AER: Vfio-pci driver changes for supporting > AER > > On Wed, 2013-01-09 at 10:52 -0700, Alex Williamson wrote: > > On Wed, 2013-01-09 at 06:26 +0000, Pandarathil, Vijaymohan R wrote: > > > - New ioctl which is used to pass the eventfd that is signaled when > > > an error occurs in the vfio_pci_device > > > > > > - Register pci_error_handler for the vfio_pci driver > > > > > > - When the device encounters an error, the error handler registered > by > > > the vfio_pci driver gets invoked by the AER infrastructure > > > > > > - In the error handler, signal the eventfd registered for the device. > > > > > > - This results in the qemu eventfd handler getting invoked and > > > appropriate action taken for the guest. > > > > > > Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@xxxxxx> > > > --- > > > drivers/vfio/pci/vfio_pci.c | 29 +++++++++++++++++++++++++++++ > > > drivers/vfio/pci/vfio_pci_private.h | 1 + > > > drivers/vfio/vfio.c | 8 ++++++++ > > > include/linux/vfio.h | 1 + > > > include/uapi/linux/vfio.h | 9 +++++++++ > > > 5 files changed, 48 insertions(+) > > > > > > diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c > > > index 6c11994..4ae9526 100644 > > > --- a/drivers/vfio/pci/vfio_pci.c > > > +++ b/drivers/vfio/pci/vfio_pci.c > > > @@ -207,6 +207,8 @@ static long vfio_pci_ioctl(void *device_data, > > > if (vdev->reset_works) > > > info.flags |= VFIO_DEVICE_FLAGS_RESET; > > > > > > + info.flags |= VFIO_DEVICE_FLAGS_AER_NOTIFY; > > > + > > > > This appears to be a PCI specific flag, so the name should include > > _PCI_. We also support non-PCIe devices and it seems like it would be > > possible to not have AER support available, so shouldn't this be > > conditional? Will do that. > > > > > info.num_regions = VFIO_PCI_NUM_REGIONS; > > > info.num_irqs = VFIO_PCI_NUM_IRQS; > > > > > > @@ -348,6 +350,19 @@ static long vfio_pci_ioctl(void *device_data, > > > > > > return ret; > > > > > > + } else if (cmd == VFIO_DEVICE_SET_ERRFD) { > > > + int32_t fd = (int32_t)arg; > > > + > > > + if (fd < 0) > > > + return -EINVAL; > > > + > > > + vdev->err_trigger = eventfd_ctx_fdget(fd); > > > + > > > + if (IS_ERR(vdev->err_trigger)) > > > + return PTR_ERR(vdev->err_trigger); > > > + > > > + return 0; > > > + > > > > I'm not sure why we wouldn't describe this as just another interrupt > > from the device and configure it via SET_IRQ. This ioctl has very > > limited use and doesn't follow any of the conventions of all the other > > vfio ioctls. I thought this was a fairly simple ioctl to implement this way. Moreover, there is no device interrupt involved. Let me know if you really want to model it as a SET_IRQ ioctl. > > > > > } else if (cmd == VFIO_DEVICE_RESET) > > > return vdev->reset_works ? > > > pci_reset_function(vdev->pdev) : -EINVAL; > > > @@ -527,11 +542,25 @@ static void vfio_pci_remove(struct pci_dev *pdev) > > > kfree(vdev); > > > } > > > > > > +static pci_ers_result_t vfio_err_detected(struct pci_dev *pdev, > > > + pci_channel_state_t state) > > > +{ > > > + struct vfio_pci_device *vdev = vfio_get_vdev(&pdev->dev); > > > + > > > + eventfd_signal(vdev->err_trigger, 1); > > > + return PCI_ERS_RESULT_CAN_RECOVER; > > > +} > > > > What if err_trigger hasn't been set? Will fix that. > > > > > + > > > +static const struct pci_error_handlers vfio_err_handlers = { > > > + .error_detected = vfio_err_detected, > > > +}; > > > + > > > static struct pci_driver vfio_pci_driver = { > > > .name = "vfio-pci", > > > .id_table = NULL, /* only dynamic ids */ > > > .probe = vfio_pci_probe, > > > .remove = vfio_pci_remove, > > > + .err_handler = &vfio_err_handlers, > > > }; > > > > > > static void __exit vfio_pci_cleanup(void) > > > diff --git a/drivers/vfio/pci/vfio_pci_private.h > b/drivers/vfio/pci/vfio_pci_private.h > > > index 611827c..daee62f 100644 > > > --- a/drivers/vfio/pci/vfio_pci_private.h > > > +++ b/drivers/vfio/pci/vfio_pci_private.h > > > @@ -55,6 +55,7 @@ struct vfio_pci_device { > > > bool bardirty; > > > struct pci_saved_state *pci_saved_state; > > > atomic_t refcnt; > > > + struct eventfd_ctx *err_trigger; > > > }; > > > > > > #define is_intx(vdev) (vdev->irq_type == VFIO_PCI_INTX_IRQ_INDEX) > > > diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c > > > index 56097c6..5ed5a54 100644 > > > --- a/drivers/vfio/vfio.c > > > +++ b/drivers/vfio/vfio.c > > > @@ -693,6 +693,14 @@ void *vfio_del_group_dev(struct device *dev) > > > } > > > EXPORT_SYMBOL_GPL(vfio_del_group_dev); > > > > > > +void *vfio_get_vdev(struct device *dev) > > > +{ > > > + struct vfio_device *device = dev_get_drvdata(dev); > > > + > > > + return device->device_data; > > > +} > > > +EXPORT_SYMBOL_GPL(vfio_get_vdev); > > > + > > > > This is unsafe. How do we know dev is a vfio device? How do we keep > > that drvdata valid while you're using it? I think you want to export > > the existing vfio_group_get_device() and vfio_device_put(). Thanks, > > vfio_group_get_device() isn't quite what you want either since it > assumes a reference count on the group. You'll want something like > vfio_add_group_dev() or vfio_dev_present(), perhaps moving the > iommu_group_get -> vfio_group_get_from_iommu -> vfio_group_get_device > into a helper function. Thanks, Thanks for the pointers. Will make the change. Vijay > > Alex > > > > /** > > > * VFIO base fd, /dev/vfio/vfio > > > */ > > > diff --git a/include/linux/vfio.h b/include/linux/vfio.h > > > index ab9e862..3c97b03 100644 > > > --- a/include/linux/vfio.h > > > +++ b/include/linux/vfio.h > > > @@ -45,6 +45,7 @@ extern int vfio_add_group_dev(struct device *dev, > > > void *device_data); > > > > > > extern void *vfio_del_group_dev(struct device *dev); > > > +extern void *vfio_get_vdev(struct device *dev); > > > > > > /** > > > * struct vfio_iommu_driver_ops - VFIO IOMMU driver callbacks > > > diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h > > > index 4758d1b..fa67213 100644 > > > --- a/include/uapi/linux/vfio.h > > > +++ b/include/uapi/linux/vfio.h > > > @@ -147,6 +147,7 @@ struct vfio_device_info { > > > __u32 flags; > > > #define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports > reset */ > > > #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ > > > +#define VFIO_DEVICE_FLAGS_AER_NOTIFY (1 << 2) /* Supports aer > notify */ > > > __u32 num_regions; /* Max region index + 1 */ > > > __u32 num_irqs; /* Max IRQ index + 1 */ > > > }; > > > @@ -288,6 +289,14 @@ struct vfio_irq_set { > > > */ > > > #define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) > > > > > > +/** > > > + * VFIO_DEVICE_SET_ERRFD - _IO(VFIO_TYPE, VFIO_BASE + 12) > > > + * > > > + * Pass the eventfd to the vfio-pci driver for signalling any device > > > + * error notifications > > > + */ > > > +#define VFIO_DEVICE_SET_ERRFD _IO(VFIO_TYPE, VFIO_BASE + 12) > > > + > > > /* > > > * The VFIO-PCI bus driver makes use of the following fixed region and > > > * IRQ index mapping. Unimplemented regions return a size of zero. > > > > > > ��.n��������+%������w��{.n�����o�^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�
