On Thu, Dec 20, 2012 at 08:59:11PM -0200, Marcelo Tosatti wrote:
> On Mon, Dec 17, 2012 at 01:30:49PM +0800, Yang Zhang wrote:
> > From: Yang Zhang <yang.z.zhang@xxxxxxxxx>
> >
> > Virtual interrupt delivery avoids KVM to inject vAPIC interrupts
> > manually, which is fully taken care of by the hardware. This needs
> > some special awareness into existing interrupr injection path:
> >
> > - for pending interrupt, instead of direct injection, we may need
> > update architecture specific indicators before resuming to guest.
> >
> > - A pending interrupt, which is masked by ISR, should be also
> > considered in above update action, since hardware will decide
> > when to inject it at right time. Current has_interrupt and
> > get_interrupt only returns a valid vector from injection p.o.v.
> >
> > Signed-off-by: Kevin Tian <kevin.tian@xxxxxxxxx>
> > Signed-off-by: Yang Zhang <yang.z.zhang@xxxxxxxxx>
> > ---
> > arch/ia64/kvm/lapic.h | 6 ++
> > arch/x86/include/asm/kvm_host.h | 6 ++
> > arch/x86/include/asm/vmx.h | 11 +++
> > arch/x86/kvm/irq.c | 56 +++++++++++++-
> > arch/x86/kvm/lapic.c | 65 ++++++++++-------
> > arch/x86/kvm/lapic.h | 28 ++++++-
> > arch/x86/kvm/svm.c | 24 ++++++
> > arch/x86/kvm/vmx.c | 154 ++++++++++++++++++++++++++++++++++++++-
> > arch/x86/kvm/x86.c | 11 ++-
> > include/linux/kvm_host.h | 2 +
> > virt/kvm/ioapic.c | 36 +++++++++
> > virt/kvm/ioapic.h | 1 +
> > virt/kvm/irq_comm.c | 20 +++++
> > 13 files changed, 379 insertions(+), 41 deletions(-)
> >
> > diff --git a/arch/ia64/kvm/lapic.h b/arch/ia64/kvm/lapic.h
> > index c5f92a9..cb59eb4 100644
> > --- a/arch/ia64/kvm/lapic.h
> > +++ b/arch/ia64/kvm/lapic.h
> > @@ -27,4 +27,10 @@ int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq);
> > #define kvm_apic_present(x) (true)
> > #define kvm_lapic_enabled(x) (true)
> >
> > +static inline void kvm_update_eoi_exitmap(struct kvm *kvm,
> > + struct kvm_lapic_irq *irq)
> > +{
> > + /* IA64 has no apicv supporting, do nothing here */
> > +}
> > +
> > #endif
> > diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> > index c431b33..b63a144 100644
> > --- a/arch/x86/include/asm/kvm_host.h
> > +++ b/arch/x86/include/asm/kvm_host.h
> > @@ -697,6 +697,11 @@ struct kvm_x86_ops {
> > void (*enable_nmi_window)(struct kvm_vcpu *vcpu);
> > void (*enable_irq_window)(struct kvm_vcpu *vcpu);
> > void (*update_cr8_intercept)(struct kvm_vcpu *vcpu, int tpr, int irr);
> > + int (*has_virtual_interrupt_delivery)(struct kvm_vcpu *vcpu);
> > + void (*update_apic_irq)(struct kvm_vcpu *vcpu, int max_irr);
> > + void (*update_eoi_exitmap)(struct kvm *kvm, struct kvm_lapic_irq *irq);
> > + void (*reset_eoi_exitmap)(struct kvm_vcpu *vcpu);
> > + void (*load_eoi_exitmap)(struct kvm_vcpu *vcpu);
> > int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
> > int (*get_tdp_level)(void);
> > u64 (*get_mt_mask)(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio);
>
> EOI exit bitmap is problematic (its racy). Please do this:
>
> 1. Make a synchronous (1) KVM_REQ_EOIBITMAP request on IOAPIC register
> modifications which require EOI exit bitmap updates.
> 2. On VM-entry, during KVM_REQ_EOIBITMAP processing, each checks IOAPIC map
> and adjusts its own EOI exit bitmap VMCS registers.
>
> 1) that waits until remote executing VCPUs have acknowledge the request,
> using make_all_cpus_request (see virt/kvm/kvm_main.c), similarly to
> remote TLB flushes.
>
> What is the problem now: there is no control over _when_ a VCPU updates
> its EOI exit bitmap VMCS register from the (remotely updated) master EOI
> exit bitmap. The VCPU can be processing a KVM_REQ_EOIBITMAP relative to
> a precedence IOAPIC register write while the current IOAPIC register
> write is updating the EOI exit bitmap. There is no way to fix that
> without locking (which can be avoided if the IOAPIC->EOI exit bitmap
> synchronization is vcpu local).
>
The race is benign. We have similar one for interrupt injection and the same race
exists on a real HW. The two cases that can happen due to the race are:
1. exitbitmap bit X is changed from 1 to 0
No problem. It is harmless to do an exit, on the next entry exitbitmap
will be fixed.
2. exitbitmap bit X is changed from 0 to 1
If vcpu serves X at the time this happens it was delivered as edge, so
no need to exit. The exitbitmap will be updated after the next vmexit
which will happen due to KVM_REQ_EOIBITMAP processing.
But software really should take care of not changing interrupt vector
configuration while there is an interrupt in flight with the same vector.
> Questions below.
>
> > @@ -236,12 +225,14 @@ static inline void kvm_apic_set_id(struct kvm_lapic *apic, u8 id)
> > {
> > apic_set_reg(apic, APIC_ID, id << 24);
> > recalculate_apic_map(apic->vcpu->kvm);
> > + ioapic_update_eoi_exitmap(apic->vcpu->kvm);
> > }
>
> Why is it necessary to update EOI exit bitmap here?
>
All the places where apic_map, which is used to build exit
bitmap, can change should call ioapic_update_eoi_exitmap().
> > static inline void kvm_apic_set_ldr(struct kvm_lapic *apic, u32 id)
> > {
> > apic_set_reg(apic, APIC_LDR, id);
> > recalculate_apic_map(apic->vcpu->kvm);
> > + ioapic_update_eoi_exitmap(apic->vcpu->kvm);
> > }
>
> And here?
>
> > +/*
> > + * this interface assumes a trap-like exit, which has already finished
> > + * desired side effect including vISR and vPPR update.
> > + */
> > +void kvm_apic_set_eoi_accelerated(struct kvm_vcpu *vcpu, int vector)
> > +{
> > + struct kvm_lapic *apic = vcpu->arch.apic;
> > +
> > + trace_kvm_eoi(apic, vector);
> > +
> > + kvm_ioapic_send_eoi(apic, vector);
> > + kvm_make_request(KVM_REQ_EVENT, apic->vcpu);
> > +}
>
> Why is it necessary to set KVM_REQ_EVENT here?
>
> > apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
> > recalculate_apic_map(apic->vcpu->kvm);
> > + ioapic_update_eoi_exitmap(apic->vcpu->kvm);
> > } else
> > ret = 1;
> > break;
> > @@ -1318,6 +1330,7 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
> > else
> > static_key_slow_inc(&apic_hw_disabled.key);
> > recalculate_apic_map(vcpu->kvm);
> > + ioapic_update_eoi_exitmap(apic->vcpu->kvm);
> > }
>
> Again, why all this EOI exit bitmap updates?
>
> > +static void svm_update_eoi_exitmap(struct kvm *kvm, struct kvm_lapic_irq *irq)
> > +{
> > + return ;
> > +}
> > +
> > +static void svm_reset_eoi_exitmap(struct kvm_vcpu *vcpu)
> > +{
> > + return ;
> > +}
> > +
> > +static void svm_load_eoi_exitmap(struct kvm_vcpu *vcpu)
> > +{
> > + return ;
> > +}
>
> Please mind coding style.
>
> > +static void vmx_update_apic_irq(struct kvm_vcpu *vcpu, int max_irr)
> > +{
> > + if (max_irr == -1)
> > + return ;
>
> Coding style.
--
Gleb.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
