[PATCH 2/3] vfio-pci: Add KVM INTx acceleration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This makes use of the new level irqfd support enabling bypass of qemu
userspace both on INTx injection and unmask.  This significantly
boosts the performance of devices making use of legacy interrupts (ex.
~60% better netperf TCP_RR scores for an e1000e assigned to a Linux
guest and booted with pci=nomsi).  This also avoids flipping mmaps on
and off to simulate EOIs, so greatly improves performance of device
access in addition to interrupt latency.

Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
---
 hw/vfio_pci.c |  186 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 186 insertions(+)

diff --git a/hw/vfio_pci.c b/hw/vfio_pci.c
index 0473ae8..4e9c2dd 100644
--- a/hw/vfio_pci.c
+++ b/hw/vfio_pci.c
@@ -185,6 +185,21 @@ static void vfio_unmask_intx(VFIODevice *vdev)
     ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
 }
 
+#ifdef CONFIG_KVM /* Unused outside of CONFIG_KVM code */
+static void vfio_mask_intx(VFIODevice *vdev)
+{
+    struct vfio_irq_set irq_set = {
+        .argsz = sizeof(irq_set),
+        .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_MASK,
+        .index = VFIO_PCI_INTX_IRQ_INDEX,
+        .start = 0,
+        .count = 1,
+    };
+
+    ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set);
+}
+#endif
+
 /*
  * Disabling BAR mmaping can be slow, but toggling it around INTx can
  * also be a huge overhead.  We try to get the best of both worlds by
@@ -248,6 +263,161 @@ static void vfio_eoi(VFIODevice *vdev)
     vfio_unmask_intx(vdev);
 }
 
+static void vfio_enable_intx_kvm(VFIODevice *vdev)
+{
+#ifdef CONFIG_KVM
+    struct kvm_irqfd irqfd = {
+        .fd = event_notifier_get_fd(&vdev->intx.interrupt),
+        .gsi = vdev->intx.route.irq,
+        .flags = KVM_IRQFD_FLAG_RESAMPLE,
+    };
+    struct vfio_irq_set *irq_set;
+    int ret, argsz;
+    int32_t *pfd;
+
+    if (!kvm_irqchip_in_kernel() ||
+        vdev->intx.route.mode != PCI_INTX_ENABLED ||
+        !kvm_check_extension(kvm_state, KVM_CAP_IRQFD_RESAMPLE)) {
+        return;
+    }
+
+    /* Get to a known interrupt state */
+    qemu_set_fd_handler(irqfd.fd, NULL, NULL, vdev);
+    vfio_mask_intx(vdev);
+    vdev->intx.pending = false;
+    qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0);
+
+    /* Get an eventfd for resample/unmask */
+    if (event_notifier_init(&vdev->intx.unmask, 0)) {
+        error_report("vfio: Error: event_notifier_init failed eoi\n");
+        goto fail;
+    }
+
+    /* KVM triggers it, VFIO listens for it */
+    irqfd.resamplefd = event_notifier_get_fd(&vdev->intx.unmask);
+
+    if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
+        error_report("vfio: Error: Failed to setup resample irqfd: %m\n");
+        goto fail_irqfd;
+    }
+
+    argsz = sizeof(*irq_set) + sizeof(*pfd);
+
+    irq_set = g_malloc0(argsz);
+    irq_set->argsz = argsz;
+    irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_UNMASK;
+    irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
+    irq_set->start = 0;
+    irq_set->count = 1;
+    pfd = (int32_t *)&irq_set->data;
+
+    *pfd = irqfd.resamplefd;
+
+    ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, irq_set);
+    g_free(irq_set);
+    if (ret) {
+        error_report("vfio: Error: Failed to setup INTx unmask fd: %m\n");
+        goto fail_vfio;
+    }
+
+    /* Let'em rip */
+    vfio_unmask_intx(vdev);
+
+    vdev->intx.kvm_accel = true;
+
+    DPRINTF("%s(%04x:%02x:%02x.%x) KVM INTx accel enabled\n",
+            __func__, vdev->host.domain, vdev->host.bus,
+            vdev->host.slot, vdev->host.function);
+
+    return;
+
+fail_vfio:
+    irqfd.flags = KVM_IRQFD_FLAG_DEASSIGN;
+    kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd);
+fail_irqfd:
+    event_notifier_cleanup(&vdev->intx.unmask);
+fail:
+    qemu_set_fd_handler(irqfd.fd, vfio_intx_interrupt, NULL, vdev);
+    vfio_unmask_intx(vdev);
+#endif
+}
+
+static void vfio_disable_intx_kvm(VFIODevice *vdev)
+{
+#ifdef CONFIG_KVM
+    struct kvm_irqfd irqfd = {
+        .fd = event_notifier_get_fd(&vdev->intx.interrupt),
+        .gsi = vdev->intx.route.irq,
+        .flags = KVM_IRQFD_FLAG_DEASSIGN,
+    };
+
+    if (!vdev->intx.kvm_accel) {
+        return;
+    }
+
+    /*
+     * Get to a known state, hardware masked, QEMU ready to accept new
+     * interrupts, QEMU IRQ de-asserted.
+     */
+    vfio_mask_intx(vdev);
+    vdev->intx.pending = false;
+    qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0);
+
+    /* Tell KVM to stop listening for an INTx irqfd */
+    if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
+        error_report("vfio: Error: Failed to disable INTx irqfd: %m\n");
+    }
+
+    /* We only need to close the eventfd for VFIO to cleanup the kernel side */
+    event_notifier_cleanup(&vdev->intx.unmask);
+
+    /* QEMU starts listening for interrupt events. */
+    qemu_set_fd_handler(irqfd.fd, vfio_intx_interrupt, NULL, vdev);
+
+    vdev->intx.kvm_accel = false;
+
+    /* If we've missed an event, let it re-fire through QEMU */
+    vfio_unmask_intx(vdev);
+
+    DPRINTF("%s(%04x:%02x:%02x.%x) KVM INTx accel disabled\n",
+            __func__, vdev->host.domain, vdev->host.bus,
+            vdev->host.slot, vdev->host.function);
+#endif
+}
+
+static void vfio_update_irq(PCIDevice *pdev)
+{
+    VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev);
+    PCIINTxRoute route;
+
+    if (vdev->interrupt != VFIO_INT_INTx) {
+        return;
+    }
+
+    route = pci_device_route_intx_to_irq(&vdev->pdev, vdev->intx.pin);
+
+    if (!pci_intx_route_changed(&vdev->intx.route, &route)) {
+        return; /* Nothing changed */
+    }
+
+    DPRINTF("%s(%04x:%02x:%02x.%x) IRQ moved %d -> %d\n", __func__,
+            vdev->host.domain, vdev->host.bus, vdev->host.slot,
+            vdev->host.function, vdev->intx.route.irq, route.irq);
+
+    vfio_disable_intx_kvm(vdev);
+
+    vdev->intx.route = route;
+
+    if (route.mode != PCI_INTX_ENABLED) {
+        return;
+    }
+
+    vfio_enable_intx_kvm(vdev);
+
+    /* Re-enable the interrupt in cased we missed an EOI */
+    vfio_eoi(vdev);
+}
+
 static int vfio_enable_intx(VFIODevice *vdev)
 {
     uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1);
@@ -262,6 +432,18 @@ static int vfio_enable_intx(VFIODevice *vdev)
     vfio_disable_interrupts(vdev);
 
     vdev->intx.pin = pin - 1; /* Pin A (1) -> irq[0] */
+
+#ifdef CONFIG_KVM
+    /*
+     * Only conditional to avoid generating error messages on platforms
+     * where we won't actually use the result anyway.
+     */
+    if (kvm_check_extension(kvm_state, KVM_CAP_IRQFD_RESAMPLE)) {
+        vdev->intx.route = pci_device_route_intx_to_irq(&vdev->pdev,
+                                                        vdev->intx.pin);
+    }
+#endif
+
     ret = event_notifier_init(&vdev->intx.interrupt, 0);
     if (ret) {
         error_report("vfio: Error: event_notifier_init failed\n");
@@ -290,6 +472,8 @@ static int vfio_enable_intx(VFIODevice *vdev)
         return -errno;
     }
 
+    vfio_enable_intx_kvm(vdev);
+
     vdev->interrupt = VFIO_INT_INTx;
 
     DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain,
@@ -303,6 +487,7 @@ static void vfio_disable_intx(VFIODevice *vdev)
     int fd;
 
     qemu_del_timer(vdev->intx.mmap_timer);
+    vfio_disable_intx_kvm(vdev);
     vfio_disable_irqindex(vdev, VFIO_PCI_INTX_IRQ_INDEX);
     vdev->intx.pending = false;
     qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0);
@@ -1839,6 +2024,7 @@ static int vfio_initfn(PCIDevice *pdev)
     if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) {
         vdev->intx.mmap_timer = qemu_new_timer_ms(vm_clock,
                                                   vfio_intx_mmap_enable, vdev);
+        pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_update_irq);
         ret = vfio_enable_intx(vdev);
         if (ret) {
             goto out_teardown;

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux