Re: [RFC PATCH v3 05/19] Implement dimm device abstraction

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



At 09/21/2012 07:17 PM, Vasilis Liaskovitis Wrote:
> Each hotplug-able memory slot is a DimmDevice. All DimmDevices are attached
> to a new bus called DimmBus. This bus is introduced so that we no longer
> depend on hotplug-capability of main system bus (the main bus does not allow
> hotplugging). The DimmBus should be attached to a chipset Device (i440fx in case
> of the pc)
> 
> A hot-add operation for a particular dimm:
> - creates a new DimmDevice and attaches it to the DimmBus
> - creates a new MemoryRegion of the given physical address offset, size and
> node proximity, and attaches it to main system memory as a sub_region.
> 
> A successful hot-remove operation detaches and frees the MemoryRegion from
> system memory, and removes the DimmDevice from the DimmBus.
> 
> Hotplug operations are done through normal device_add /device_del commands.
> Also add properties to DimmDevice.
> 
> Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@xxxxxxxxxxxxxxxx>
> ---
>  hw/dimm.c |  305 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/dimm.h |   90 ++++++++++++++++++
>  2 files changed, 395 insertions(+), 0 deletions(-)
>  create mode 100644 hw/dimm.c
>  create mode 100644 hw/dimm.h
> 
> diff --git a/hw/dimm.c b/hw/dimm.c
> new file mode 100644
> index 0000000..288b997
> --- /dev/null
> +++ b/hw/dimm.c
> @@ -0,0 +1,305 @@
> +/*
> + * Dimm device for Memory Hotplug
> + *
> + * Copyright ProfitBricks GmbH 2012
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see <http://www.gnu.org/licenses/>
> + */
> +
> +#include "trace.h"
> +#include "qdev.h"
> +#include "dimm.h"
> +#include <time.h>
> +#include "../exec-memory.h"
> +#include "qmp-commands.h"
> +
> +/* the system-wide memory bus. */
> +static DimmBus *main_memory_bus;
> +/* the following list is used to hold dimm config info before machine
> + * initialization. After machine init, the list is emptied and not used anymore.*/
> +static DimmConfiglist dimmconfig_list = QTAILQ_HEAD_INITIALIZER(dimmconfig_list);
> +
> +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent);
> +static char *dimmbus_get_fw_dev_path(DeviceState *dev);
> +
> +static Property dimm_properties[] = {
> +    DEFINE_PROP_UINT64("start", DimmDevice, start, 0),
> +    DEFINE_PROP_UINT64("size", DimmDevice, size, DEFAULT_DIMMSIZE),
> +    DEFINE_PROP_UINT32("node", DimmDevice, node, 0),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent)
> +{
> +}
> +
> +static char *dimmbus_get_fw_dev_path(DeviceState *dev)
> +{
> +    char path[40];
> +
> +    snprintf(path, sizeof(path), "%s", qdev_fw_name(dev));
> +    return strdup(path);
> +}
> +
> +static void dimm_bus_class_init(ObjectClass *klass, void *data)
> +{
> +    BusClass *k = BUS_CLASS(klass);
> +
> +    k->print_dev = dimmbus_dev_print;
> +    k->get_fw_dev_path = dimmbus_get_fw_dev_path;
> +}
> +
> +static void dimm_bus_initfn(Object *obj)
> +{
> +    DimmConfig *dimm_cfg, *next_dimm_cfg;
> +    DimmBus *bus = DIMM_BUS(obj);
> +    QTAILQ_INIT(&bus->dimmconfig_list);
> +    QTAILQ_INIT(&bus->dimmlist);
> +
> +    QTAILQ_FOREACH_SAFE(dimm_cfg, &dimmconfig_list, nextdimmcfg, next_dimm_cfg) {
> +        QTAILQ_REMOVE(&dimmconfig_list, dimm_cfg, nextdimmcfg);
> +        QTAILQ_INSERT_TAIL(&bus->dimmconfig_list, dimm_cfg, nextdimmcfg);
> +    }
> +}
> +
> +static const TypeInfo dimm_bus_info = {
> +    .name = TYPE_DIMM_BUS,
> +    .parent = TYPE_BUS,
> +    .instance_size = sizeof(DimmBus),
> +    .instance_init = dimm_bus_initfn,
> +    .class_init = dimm_bus_class_init,
> +};
> +
> +void main_memory_bus_create(Object *parent)
> +{
> +    main_memory_bus = g_malloc0(dimm_bus_info.instance_size);
> +    main_memory_bus->qbus.glib_allocated = true;
> +    qbus_create_inplace(&main_memory_bus->qbus, TYPE_DIMM_BUS, DEVICE(parent),
> +                        "membus");
> +}
> +
> +static void dimm_populate(DimmDevice *s)
> +{
> +    DeviceState *dev= (DeviceState*)s;
> +    MemoryRegion *new = NULL;
> +
> +    new = g_malloc(sizeof(MemoryRegion));
> +    memory_region_init_ram(new, dev->id, s->size);
> +    vmstate_register_ram_global(new);
> +    memory_region_add_subregion(get_system_memory(), s->start, new);
> +    s->mr = new;
> +}
> +
> +static void dimm_depopulate(DimmDevice *s)
> +{
> +    assert(s);
> +    vmstate_unregister_ram(s->mr, NULL);
> +    memory_region_del_subregion(get_system_memory(), s->mr);
> +    memory_region_destroy(s->mr);
> +    s->mr = NULL;
> +}
> +
> +void dimm_config_create(char *id, uint64_t size, uint64_t node, uint32_t
> +        dimm_idx, uint32_t populated)
> +{
> +    DimmConfig *dimm_cfg;
> +    dimm_cfg = (DimmConfig*) g_malloc0(sizeof(DimmConfig));
> +    dimm_cfg->name = id;
> +    dimm_cfg->idx = dimm_idx;
> +    dimm_cfg->start = 0;
> +    dimm_cfg->size = size;
> +    dimm_cfg->node = node;
> +    dimm_cfg->populated = populated;
> +
> +    QTAILQ_INSERT_TAIL(&dimmconfig_list, dimm_cfg, nextdimmcfg);
> +}
> +
> +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev)
> +{
> +    DimmBus *bus = main_memory_bus;
> +    bus->qbus.allow_hotplug = 1;
> +    bus->dimm_hotplug_qdev = qdev;
> +    bus->dimm_hotplug = hotplug;
> +}
> +
> +static void dimm_plug_device(DimmDevice *slot)
> +{
> +    DimmBus *bus = main_memory_bus;
> +
> +    dimm_populate(slot);
> +    if (bus->dimm_hotplug)
> +        bus->dimm_hotplug(bus->dimm_hotplug_qdev, slot, 1);
> +}
> +
> +static int dimm_unplug_device(DeviceState *qdev)
> +{
> +    DimmBus *bus = main_memory_bus;
> +
> +    if (bus->dimm_hotplug)
> +        bus->dimm_hotplug(bus->dimm_hotplug_qdev, DIMM(qdev), 0);
> +    return 1;
> +}
> +
> +static DimmConfig *dimmcfg_find_from_name(const char *name)
> +{
> +    DimmConfig *slot;
> +    DimmBus *bus = main_memory_bus;
> +
> +    QTAILQ_FOREACH(slot, &bus->dimmconfig_list, nextdimmcfg) {
> +        if (!strcmp(slot->name, name)) {
> +            return slot;
> +        }
> +    }
> +    return NULL;
> +}
> +
> +static DimmDevice *dimm_find_from_idx(uint32_t idx)
> +{
> +    DimmDevice *slot;
> +    DimmBus *bus = main_memory_bus;
> +
> +    QTAILQ_FOREACH(slot, &bus->dimmlist, nextdimm) {
> +        if (slot->idx == idx) {
> +            return slot;
> +        }
> +    }
> +    return NULL;
> +}
> +
> +/* used to create a dimm device, only on incoming migration of a hotplugged
> + * RAMBlock
> + */
> +int dimm_add(char *id)
> +{
> +    DimmConfig *slotcfg = NULL;
> +    QemuOpts *devopts;
> +    char buf[256];
> +
> +    if (!id) {
> +        fprintf(stderr, "ERROR %s invalid id\n",__FUNCTION__);
> +        return 1;
> +    }
> +
> +    slotcfg = dimmcfg_find_from_name(id);
> +
> +    if (!slotcfg) {
> +        fprintf(stderr, "%s no slot %s found\n", __FUNCTION__, id);
> +        return 1;
> +    }
> +
> +    devopts = qemu_opts_create(qemu_find_opts("device"), id, 0, NULL);
> +    qemu_opt_set(devopts, "driver", "dimm");
> +
> +    snprintf(buf, sizeof(buf), "%lu", slotcfg->size);
> +    qemu_opt_set(devopts, "size", buf);
> +    snprintf(buf, sizeof(buf), "%u", slotcfg->node);
> +    qemu_opt_set(devopts, "node", buf);
> +    qdev_device_add(devopts);
> +
> +    return 0;
> +}
> +
> +/* used to calculate physical address offsets for all dimms */
> +void dimm_calc_offsets(dimm_calcoffset_fn calcfn)
> +{
> +    DimmConfig *slot;
> +    QTAILQ_FOREACH(slot, &dimmconfig_list, nextdimmcfg) {
> +        if (!slot->start) {
> +            slot->start = calcfn(slot->size);
> +        }
> +    }
> +}
> +
> +void setup_fwcfg_hp_dimms(uint64_t *fw_cfg_slots)
> +{
> +    DimmConfig *slot;
> +
> +    QTAILQ_FOREACH(slot, &dimmconfig_list, nextdimmcfg) {
> +        assert(slot->start);
> +        fw_cfg_slots[3 * slot->idx] = cpu_to_le64(slot->start);
> +        fw_cfg_slots[3 * slot->idx + 1] = cpu_to_le64(slot->size);
> +        fw_cfg_slots[3 * slot->idx + 2] = cpu_to_le64(slot->node);
> +    }
> +}
> +
> +void dimm_notify(uint32_t idx, uint32_t event)
> +{
> +    DimmBus *bus = main_memory_bus;
> +    DimmDevice *s;
> +    s = dimm_find_from_idx(idx);
> +    assert(s != NULL);
> +
> +    switch(event) {
> +        case DIMM_REMOVE_SUCCESS:
> +            dimm_depopulate(s);
> +            qdev_simple_unplug_cb((DeviceState*)s);
> +            QTAILQ_REMOVE(&bus->dimmlist, s, nextdimm);
> +            break;
> +        default:
> +            break;
> +    }
> +}
> +
> +static int dimm_init(DeviceState *s)
> +{
> +    DimmBus *bus = main_memory_bus;
> +    DimmDevice *slot;
> +    DimmConfig *slotcfg;
> +
> +    slot = DIMM(s);
> +    slot->mr = NULL;
> +
> +    slotcfg = dimmcfg_find_from_name(s->id);
> +
> +    if (!slotcfg) {
> +        fprintf(stderr, "%s no config for slot %s found\n",
> +                __FUNCTION__, s->id);
> +        return 1;
> +    }
> +
> +    slot->idx = slotcfg->idx;
> +    assert(slotcfg->start);
> +    slot->start = slotcfg->start;
> +    slot->size = slotcfg->size;
> +    slot->node = slotcfg->node;
> +
> +    QTAILQ_INSERT_TAIL(&bus->dimmlist, slot, nextdimm);
> +    dimm_plug_device(slot);
> +
> +    return 0;
> +}
> +
> +
> +static void dimm_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    dc->props = dimm_properties;
> +    dc->unplug = dimm_unplug_device;
> +    dc->init = dimm_init;
> +}
> +
> +static TypeInfo dimm_info = {
> +    .name          = TYPE_DIMM,
> +    .parent        = TYPE_DEVICE,
> +    .instance_size = sizeof(DimmDevice),
> +    .class_init    = dimm_class_init,
> +};
> +
> +static void dimm_register_types(void)
> +{
> +    type_register_static(&dimm_bus_info);
> +    type_register_static(&dimm_info);
> +}
> +
> +type_init(dimm_register_types)
> diff --git a/hw/dimm.h b/hw/dimm.h
> new file mode 100644
> index 0000000..5e991a6
> --- /dev/null
> +++ b/hw/dimm.h
> @@ -0,0 +1,90 @@
> +#ifndef QEMU_DIMM_H
> +#define QEMU_DIMM_H
> +
> +#include "qemu-common.h"
> +#include "memory.h"
> +#include "sysbus.h"
> +#include "qapi-types.h"
> +#include "qemu-queue.h"
> +#include "cpus.h"
> +#define MAX_DIMMS 255
> +#define DIMM_BITMAP_BYTES (MAX_DIMMS + 7) / 8
> +#define DEFAULT_DIMMSIZE 1024*1024*1024
> +
> +typedef enum {
> +    DIMM_REMOVE_SUCCESS = 0,
> +    DIMM_REMOVE_FAIL = 1,
> +    DIMM_ADD_SUCCESS = 2,
> +    DIMM_ADD_FAIL = 3
> +} dimm_hp_result_code;
> +
> +#define TYPE_DIMM "dimm"
> +#define DIMM(obj) \
> +    OBJECT_CHECK(DimmDevice, (obj), TYPE_DIMM)
> +#define DIMM_CLASS(klass) \
> +    OBJECT_CLASS_CHECK(DimmDeviceClass, (klass), TYPE_DIMM)
> +#define DIMM_GET_CLASS(obj) \
> +    OBJECT_GET_CLASS(DimmDeviceClass, (obj), TYPE_DIMM)
> +
> +typedef struct DimmDevice DimmDevice;
> +typedef QTAILQ_HEAD(DimmConfiglist, DimmConfig) DimmConfiglist;
> +
> +typedef struct DimmDeviceClass {
> +    DeviceClass parent_class;
> +
> +    int (*init)(DimmDevice *dev);
> +} DimmDeviceClass;
> +
> +typedef struct DimmDevice {

typedef is unnecessay here, and it will break building:
  CC    hmp.o
In file included from /home/wency/source/qemu/hw/acpi_piix4.c:32:
/home/wency/source/qemu/hw/dimm.h:54: error: redefinition of typedef ‘DimmDevice’
/home/wency/source/qemu/hw/dimm.h:36: note: previous declaration of ‘DimmDevice’ was here
make[1]: *** [hw/acpi_piix4.o] Error 1
make[1]: *** Waiting for unfinished jobs....
  CC    audio/audio.o
make: *** [subdir-libhw64] Error 2
make: *** Waiting for unfinished jobs....

Thanks
Wen Congyang


> +    DeviceState qdev;
> +    uint32_t idx; /* index in memory hotplug register/bitmap */
> +    ram_addr_t start; /* starting physical address */
> +    ram_addr_t size;
> +    uint32_t node; /* numa node proximity */
> +    MemoryRegion *mr; /* MemoryRegion for this slot. !NULL only if populated */
> +    QTAILQ_ENTRY (DimmDevice) nextdimm;
> +} DimmDevice;
> +
> +typedef struct DimmConfig
> +{
> +    const char *name;
> +    uint32_t idx; /* index in memory hotplug register/bitmap */
> +    ram_addr_t start; /* starting physical address */
> +    ram_addr_t size;
> +    uint32_t node; /* numa node proximity */
> +    uint32_t populated; /* 1 means device has been hotplugged. Default is 0. */
> +    QTAILQ_ENTRY (DimmConfig) nextdimmcfg;
> +} DimmConfig;
> +
> +typedef int (*dimm_hotplug_fn)(DeviceState *qdev, DimmDevice *dev, int add);
> +typedef target_phys_addr_t (*dimm_calcoffset_fn)(uint64_t size);
> +
> +#define TYPE_DIMM_BUS "dimmbus"
> +#define DIMM_BUS(obj) OBJECT_CHECK(DimmBus, (obj), TYPE_DIMM_BUS)
> +
> +typedef struct DimmBus {
> +    BusState qbus;
> +    DeviceState *dimm_hotplug_qdev;
> +    dimm_hotplug_fn dimm_hotplug;
> +    dimm_calcoffset_fn dimm_calcoffset;
> +    DimmConfiglist dimmconfig_list;
> +    QTAILQ_HEAD(Dimmlist, DimmDevice) dimmlist;
> +} DimmBus;
> +
> +struct dimm_hp_result {
> +    const char *dimmname;
> +    dimm_hp_result_code ret;
> +    QTAILQ_ENTRY (dimm_hp_result) next;
> +};
> +
> +void dimm_calc_offsets(dimm_calcoffset_fn calcfn);
> +void dimm_notify(uint32_t idx, uint32_t event);
> +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev);
> +void setup_fwcfg_hp_dimms(uint64_t *fw_cfg_slots);
> +int dimm_add(char *id);
> +void main_memory_bus_create(Object *parent);
> +void dimm_config_create(char *id, uint64_t size, uint64_t node,
> +        uint32_t dimm_idx, uint32_t populated);
> +
> +
> +#endif

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux