On 20.09.2012, at 16:24, Anthony Liguori <aliguori@xxxxxxxxxx> wrote:
> Cornelia Huck <cornelia.huck@xxxxxxxxxx> writes:
>
>> Add a new virtio transport that uses channel commands to perform
>> virtio operations.
>>
>> Add a new machine type s390-ccw that uses this virtio-ccw transport
>> and make it the default machine for s390.
>>
>> Signed-off-by: Cornelia Huck <cornelia.huck@xxxxxxxxxx>
>> ---
>>
>> Changes v1->v2:
>> - update to virtio-ccw interface changes
>>
>> ---
>> hw/qdev-monitor.c | 5 +
>> hw/s390-virtio.c | 277 ++++++++++++----
>> hw/s390x/Makefile.objs | 1 +
>> hw/s390x/css.c | 45 +++
>> hw/s390x/css.h | 3 +
>> hw/s390x/virtio-ccw.c | 875 +++++++++++++++++++++++++++++++++++++++++++++++++
>> hw/s390x/virtio-ccw.h | 79 +++++
>> vl.c | 1 +
>> 8 files changed, 1215 insertions(+), 71 deletions(-)
>> create mode 100644 hw/s390x/virtio-ccw.c
>> create mode 100644 hw/s390x/virtio-ccw.h
>>
>> diff --git a/hw/qdev-monitor.c b/hw/qdev-monitor.c
>> index 33b7f79..92b7c59 100644
>> --- a/hw/qdev-monitor.c
>> +++ b/hw/qdev-monitor.c
>> @@ -42,6 +42,11 @@ static const QDevAlias qdev_alias_table[] = {
>> { "virtio-blk-s390", "virtio-blk", QEMU_ARCH_S390X },
>> { "virtio-net-s390", "virtio-net", QEMU_ARCH_S390X },
>> { "virtio-serial-s390", "virtio-serial", QEMU_ARCH_S390X },
>> + { "virtio-blk-ccw", "virtio-blk", QEMU_ARCH_S390X },
>> + { "virtio-net-ccw", "virtio-net", QEMU_ARCH_S390X },
>> + { "virtio-serial-ccw", "virtio-serial", QEMU_ARCH_S390X },
>> + { "virtio-balloon-ccw", "virtio-balloon", QEMU_ARCH_S390X },
>> + { "virtio-scsi-ccw", "virtio-scsi", QEMU_ARCH_S390X },
>> { "lsi53c895a", "lsi" },
>> { "ich9-ahci", "ahci" },
>
> Please don't add aliases. That's just an ugly hack to maintain compatibility.
>
>> { }
>> diff --git a/hw/s390-virtio.c b/hw/s390-virtio.c
>> index 47eed35..2509291 100644
>> --- a/hw/s390-virtio.c
>> +++ b/hw/s390-virtio.c
>> @@ -30,8 +30,11 @@
>> #include "hw/sysbus.h"
>> #include "kvm.h"
>> #include "exec-memory.h"
>> +#include "qemu-thread.h"
>>
>> #include "hw/s390-virtio-bus.h"
>> +#include "hw/s390x/css.h"
>> +#include "hw/s390x/virtio-ccw.h"
>>
>> //#define DEBUG_S390
>>
>> @@ -46,6 +49,7 @@
>> #define KVM_S390_VIRTIO_NOTIFY 0
>> #define KVM_S390_VIRTIO_RESET 1
>> #define KVM_S390_VIRTIO_SET_STATUS 2
>> +#define KVM_S390_VIRTIO_CCW_NOTIFY 3
>>
>> #define KERN_IMAGE_START 0x010000UL
>> #define KERN_PARM_AREA 0x010480UL
>> @@ -62,6 +66,7 @@
>>
>> static VirtIOS390Bus *s390_bus;
>> static S390CPU **ipi_states;
>> +VirtioCcwBus *ccw_bus;
>>
>> S390CPU *s390_cpu_addr2state(uint16_t cpu_addr)
>> {
>> @@ -75,15 +80,21 @@ S390CPU *s390_cpu_addr2state(uint16_t cpu_addr)
>> int s390_virtio_hypercall(CPUS390XState *env, uint64_t mem, uint64_t hypercall)
>> {
>> int r = 0, i;
>> + int cssid, ssid, schid, m;
>> + SubchDev *sch;
>>
>> dprintf("KVM hypercall: %ld\n", hypercall);
>> switch (hypercall) {
>> case KVM_S390_VIRTIO_NOTIFY:
>> if (mem > ram_size) {
>> - VirtIOS390Device *dev = s390_virtio_bus_find_vring(s390_bus,
>> - mem, &i);
>> - if (dev) {
>> - virtio_queue_notify(dev->vdev, i);
>> + if (s390_bus) {
>> + VirtIOS390Device *dev = s390_virtio_bus_find_vring(s390_bus,
>> + mem, &i);
>> + if (dev) {
>> + virtio_queue_notify(dev->vdev, i);
>> + } else {
>> + r = -EINVAL;
>> + }
>> } else {
>> r = -EINVAL;
>> }
>> @@ -92,28 +103,49 @@ int s390_virtio_hypercall(CPUS390XState *env, uint64_t mem, uint64_t hypercall)
>> }
>> break;
>> case KVM_S390_VIRTIO_RESET:
>> - {
>> - VirtIOS390Device *dev;
>> -
>> - dev = s390_virtio_bus_find_mem(s390_bus, mem);
>> - virtio_reset(dev->vdev);
>> - stb_phys(dev->dev_offs + VIRTIO_DEV_OFFS_STATUS, 0);
>> - s390_virtio_device_sync(dev);
>> - s390_virtio_reset_idx(dev);
>> + if (s390_bus) {
>> + VirtIOS390Device *dev;
>> +
>> + dev = s390_virtio_bus_find_mem(s390_bus, mem);
>> + virtio_reset(dev->vdev);
>> + stb_phys(dev->dev_offs + VIRTIO_DEV_OFFS_STATUS, 0);
>> + s390_virtio_device_sync(dev);
>> + s390_virtio_reset_idx(dev);
>> + } else {
>> + r = -EINVAL;
>> + }
>> break;
>> - }
>> case KVM_S390_VIRTIO_SET_STATUS:
>> - {
>> - VirtIOS390Device *dev;
>> + if (s390_bus) {
>> + VirtIOS390Device *dev;
>>
>> - dev = s390_virtio_bus_find_mem(s390_bus, mem);
>> - if (dev) {
>> - s390_virtio_device_update_status(dev);
>> + dev = s390_virtio_bus_find_mem(s390_bus, mem);
>> + if (dev) {
>> + s390_virtio_device_update_status(dev);
>> + } else {
>> + r = -EINVAL;
>> + }
>> } else {
>> r = -EINVAL;
>> }
>> break;
>> - }
>> + case KVM_S390_VIRTIO_CCW_NOTIFY:
>> + if (ccw_bus) {
>> + if (ioinst_disassemble_sch_ident(env->regs[2], &m, &cssid, &ssid,
>> + &schid)) {
>> + r = -EINVAL;
>> + } else {
>> + sch = css_find_subch(m, cssid, ssid, schid);
>> + if (sch) {
>> + virtio_queue_notify(virtio_ccw_get_vdev(sch), env->regs[3]);
>> + } else {
>> + r = -EINVAL;
>> + }
>> + }
>> + } else {
>> + r = -EINVAL;
>> + }
>> + break;
>> default:
>> r = -EINVAL;
>> break;
>> @@ -150,58 +182,12 @@ unsigned s390_del_running_cpu(CPUS390XState *env)
>> return s390_running_cpus;
>> }
>>
>> -/* PC hardware initialisation */
>> -static void s390_init(ram_addr_t my_ram_size,
>> - const char *boot_device,
>> - const char *kernel_filename,
>> - const char *kernel_cmdline,
>> - const char *initrd_filename,
>> - const char *cpu_model)
>> +static CPUS390XState *s390_init_cpus(const char *cpu_model,
>> + uint8_t *storage_keys)
>> {
>> CPUS390XState *env = NULL;
>> - MemoryRegion *sysmem = get_system_memory();
>> - MemoryRegion *ram = g_new(MemoryRegion, 1);
>> - ram_addr_t kernel_size = 0;
>> - ram_addr_t initrd_offset;
>> - ram_addr_t initrd_size = 0;
>> - int shift = 0;
>> - uint8_t *storage_keys;
>> - void *virtio_region;
>> - target_phys_addr_t virtio_region_len;
>> - target_phys_addr_t virtio_region_start;
>> int i;
>>
>> - /* s390x ram size detection needs a 16bit multiplier + an increment. So
>> - guests > 64GB can be specified in 2MB steps etc. */
>> - while ((my_ram_size >> (20 + shift)) > 65535) {
>> - shift++;
>> - }
>> - my_ram_size = my_ram_size >> (20 + shift) << (20 + shift);
>> -
>> - /* lets propagate the changed ram size into the global variable. */
>> - ram_size = my_ram_size;
>> -
>> - /* get a BUS */
>> - s390_bus = s390_virtio_bus_init(&my_ram_size);
>> -
>> - /* allocate RAM */
>> - memory_region_init_ram(ram, "s390.ram", my_ram_size);
>> - vmstate_register_ram_global(ram);
>> - memory_region_add_subregion(sysmem, 0, ram);
>> -
>> - /* clear virtio region */
>> - virtio_region_len = my_ram_size - ram_size;
>> - virtio_region_start = ram_size;
>> - virtio_region = cpu_physical_memory_map(virtio_region_start,
>> - &virtio_region_len, true);
>> - memset(virtio_region, 0, virtio_region_len);
>> - cpu_physical_memory_unmap(virtio_region, virtio_region_len, 1,
>> - virtio_region_len);
>> -
>> - /* allocate storage keys */
>> - storage_keys = g_malloc0(my_ram_size / TARGET_PAGE_SIZE);
>> -
>> - /* init CPUs */
>> if (cpu_model == NULL) {
>> cpu_model = "host";
>> }
>> @@ -222,6 +208,17 @@ static void s390_init(ram_addr_t my_ram_size,
>> tmp_env->exception_index = EXCP_HLT;
>> tmp_env->storage_keys = storage_keys;
>> }
>> + return env;
>> +}
>> +
>> +static void s390_set_up_kernel(CPUS390XState *env,
>> + const char *kernel_filename,
>> + const char *kernel_cmdline,
>> + const char *initrd_filename)
>> +{
>> + ram_addr_t kernel_size = 0;
>> + ram_addr_t initrd_offset;
>> + ram_addr_t initrd_size = 0;
>>
>> /* One CPU has to run */
>> s390_add_running_cpu(env);
>> @@ -294,8 +291,13 @@ static void s390_init(ram_addr_t my_ram_size,
>> strlen(kernel_cmdline) + 1);
>> }
>>
>> - /* Create VirtIO network adapters */
>> - for(i = 0; i < nb_nics; i++) {
>> +}
>> +
>> +static void s390_create_virtio_net(BusState *bus, const char *name)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < nb_nics; i++) {
>> NICInfo *nd = &nd_table[i];
>> DeviceState *dev;
>>
>> @@ -308,7 +310,7 @@ static void s390_init(ram_addr_t my_ram_size,
>> exit(1);
>> }
>>
>> - dev = qdev_create((BusState *)s390_bus, "virtio-net-s390");
>> + dev = qdev_create(bus, name);
>> qdev_set_nic_properties(dev, nd);
>> qdev_init_nofail(dev);
>> }
>> @@ -329,6 +331,63 @@ static void s390_init(ram_addr_t my_ram_size,
>> }
>> }
>>
>> +/* PC hardware initialisation */
>> +static void s390_init(ram_addr_t my_ram_size,
>> + const char *boot_device,
>> + const char *kernel_filename,
>> + const char *kernel_cmdline,
>> + const char *initrd_filename,
>> + const char *cpu_model)
>> +{
>> + CPUS390XState *env = NULL;
>> + MemoryRegion *sysmem = get_system_memory();
>> + MemoryRegion *ram = g_new(MemoryRegion, 1);
>> + int shift = 0;
>> + uint8_t *storage_keys;
>> + void *virtio_region;
>> + target_phys_addr_t virtio_region_len;
>> + target_phys_addr_t virtio_region_start;
>> +
>> + /* s390x ram size detection needs a 16bit multiplier + an increment. So
>> + guests > 64GB can be specified in 2MB steps etc. */
>> + while ((my_ram_size >> (20 + shift)) > 65535) {
>> + shift++;
>> + }
>> + my_ram_size = my_ram_size >> (20 + shift) << (20 + shift);
>> +
>> + /* lets propagate the changed ram size into the global variable. */
>> + ram_size = my_ram_size;
>> +
>> + /* get a BUS */
>> + s390_bus = s390_virtio_bus_init(&my_ram_size);
>> +
>> + /* allocate RAM */
>> + memory_region_init_ram(ram, "s390.ram", my_ram_size);
>> + vmstate_register_ram_global(ram);
>> + memory_region_add_subregion(sysmem, 0, ram);
>> +
>> + /* clear virtio region */
>> + virtio_region_len = my_ram_size - ram_size;
>> + virtio_region_start = ram_size;
>> + virtio_region = cpu_physical_memory_map(virtio_region_start,
>> + &virtio_region_len, true);
>> + memset(virtio_region, 0, virtio_region_len);
>> + cpu_physical_memory_unmap(virtio_region, virtio_region_len, 1,
>> + virtio_region_len);
>> +
>> + /* allocate storage keys */
>> + storage_keys = g_malloc0(my_ram_size / TARGET_PAGE_SIZE);
>> +
>> + /* init CPUs */
>> + env = s390_init_cpus(cpu_model, storage_keys);
>> +
>> + s390_set_up_kernel(env, kernel_filename, kernel_cmdline, initrd_filename);
>> +
>> + /* Create VirtIO network adapters */
>> + s390_create_virtio_net((BusState *)s390_bus, "virtio-net-s390");
>> +
>> +}
>> +
>> static QEMUMachine s390_machine = {
>> .name = "s390-virtio",
>> .alias = "s390",
>> @@ -341,7 +400,6 @@ static QEMUMachine s390_machine = {
>> .no_sdcard = 1,
>> .use_virtcon = 1,
>> .max_cpus = 255,
>> - .is_default = 1,
>> };
>>
>> static void s390_machine_init(void)
>> @@ -350,3 +408,80 @@ static void s390_machine_init(void)
>> }
>>
>> machine_init(s390_machine_init);
>
> Alex et al.
>
> Now that we're doing virtio-ccw for s390, any reason to keep around the
> old virtio transport?
>
> Can we at least schedule it for removal?
We can schedule it for removal, but that's still a few years out. Old kernels (read: all current distros) don't support the ccw machine yet.
So we should at least have virtio-ccw in Debian stable and the by-then current SLES and RHEL releases. Preferably version+1 even. Since those roadmaps are not public yet, I wouldn't dare to settle on a deprecation date yet.
Alex
>
>> +
>> +static void ccw_init(ram_addr_t my_ram_size,
>> + const char *boot_device,
>> + const char *kernel_filename,
>> + const char *kernel_cmdline,
>> + const char *initrd_filename,
>> + const char *cpu_model)
>> +{
>> + CPUS390XState *env = NULL;
>> + MemoryRegion *sysmem = get_system_memory();
>> + MemoryRegion *ram = g_new(MemoryRegion, 1);
>> + int shift = 0;
>> + uint8_t *storage_keys;
>> + int ret;
>> +
>> + /* s390x ram size detection needs a 16bit multiplier + an increment. So
>> + guests > 64GB can be specified in 2MB steps etc. */
>> + while ((my_ram_size >> (20 + shift)) > 65535) {
>> + shift++;
>> + }
>> + my_ram_size = my_ram_size >> (20 + shift) << (20 + shift);
>> +
>> + /* lets propagate the changed ram size into the global variable. */
>> + ram_size = my_ram_size;
>> +
>> + /* get a BUS */
>> + ccw_bus = virtio_ccw_bus_init();
>> +
>> + /* allocate RAM */
>> + memory_region_init_ram(ram, "s390.ram", my_ram_size);
>> + vmstate_register_ram_global(ram);
>> + memory_region_add_subregion(sysmem, 0, ram);
>> +
>> + /* allocate storage keys */
>> + storage_keys = g_malloc0(my_ram_size / TARGET_PAGE_SIZE);
>> +
>> + /* init CPUs */
>> + env = s390_init_cpus(cpu_model, storage_keys);
>> +
>> + kvm_s390_enable_css_support(env);
>> +
>> + /*
>> + * Create virtual css and set it as default so that non mcss-e
>> + * enabled guests only see virtio devices.
>> + */
>> + ret = css_create_css_image(VIRTUAL_CSSID, true);
>> + assert(ret == 0);
>> +
>> +
>> + s390_set_up_kernel(env, kernel_filename, kernel_cmdline, initrd_filename);
>> +
>> + /* Create VirtIO network adapters */
>> + s390_create_virtio_net((BusState *)ccw_bus, "virtio-net-ccw");
>> +
>> +}
>> +
>> +static QEMUMachine ccw_machine = {
>> + .name = "s390-ccw-virtio",
>> + .alias = "s390-ccw",
>> + .desc = "VirtIO-ccw based S390 machine",
>> + .init = ccw_init,
>> + .no_cdrom = 1,
>> + .no_floppy = 1,
>> + .no_serial = 1,
>> + .no_parallel = 1,
>> + .no_sdcard = 1,
>> + .use_virtcon = 1,
>> + .max_cpus = 255,
>> + .is_default = 1,
>> +};
>> +
>> +static void ccw_machine_init(void)
>> +{
>> + qemu_register_machine(&ccw_machine);
>> +}
>> +
>> +machine_init(ccw_machine_init);
>> diff --git a/hw/s390x/Makefile.objs b/hw/s390x/Makefile.objs
>> index 93b41fb..e4c3d6f 100644
>> --- a/hw/s390x/Makefile.objs
>> +++ b/hw/s390x/Makefile.objs
>> @@ -2,3 +2,4 @@ obj-y = s390-virtio-bus.o s390-virtio.o
>>
>> obj-y := $(addprefix ../,$(obj-y))
>> obj-y += css.o
>> +obj-y += virtio-ccw.o
>> diff --git a/hw/s390x/css.c b/hw/s390x/css.c
>> index b9b6e48..a671e28 100644
>> --- a/hw/s390x/css.c
>> +++ b/hw/s390x/css.c
>> @@ -441,6 +441,51 @@ SubchDev *css_find_subch(uint8_t m, uint8_t cssid, uint8_t ssid, uint16_t schid)
>> return channel_subsys->css[real_cssid]->sch_set[ssid]->sch[schid];
>> }
>>
>> +bool css_devno_used(uint8_t cssid, uint8_t ssid, uint16_t devno)
>> +{
>> + if (!channel_subsys->css[cssid]) {
>> + return false;
>> + }
>> + if (!channel_subsys->css[cssid]->sch_set[ssid]) {
>> + return false;
>> + }
>> +
>> + return !!test_bit(devno,
>> + channel_subsys->css[cssid]->sch_set[ssid]->devnos_used);
>> +}
>> +
>> +void css_subch_assign(uint8_t cssid, uint8_t ssid, uint16_t schid, uint16_t devno,
>> + SubchDev *sch)
>> +{
>> + CssImage *css;
>> + SubchSet *s_set;
>> +
>> + if (!channel_subsys->css[cssid]) {
>> + fprintf(stderr,
>> + "Suspicious call to %s (%x.%x.%04x) for non-existing css!\n",
>> + __func__, cssid, ssid, schid);
>> + return;
>> + }
>> + css = channel_subsys->css[cssid];
>> +
>> + if (!css->sch_set[ssid]) {
>> + size_t set_size = sizeof(SubchSet) +
>> + BITS_TO_LONGS(MAX_SCHID + 1) * 2;
>> + css->sch_set[ssid] = g_malloc0(set_size);
>> + }
>> + s_set = css->sch_set[ssid];
>> +
>> + s_set->sch[schid] = sch;
>> + if (sch) {
>> + set_bit(schid, s_set->schids_used);
>> + set_bit(devno, s_set->devnos_used);
>> + } else {
>> + clear_bit(schid, s_set->schids_used);
>> + clear_bit(schid, s_set->devnos_used);
>> + }
>> +}
>> +
>> +
>> bool css_present(uint8_t cssid)
>> {
>> return (channel_subsys->css[cssid] != NULL);
>> diff --git a/hw/s390x/css.h b/hw/s390x/css.h
>> index f3590eb..6876633 100644
>> --- a/hw/s390x/css.h
>> +++ b/hw/s390x/css.h
>> @@ -53,6 +53,9 @@ struct SubchDev {
>> };
>>
>> int css_create_css_image(uint8_t cssid, bool default_image);
>> +bool css_devno_used(uint8_t cssid, uint8_t ssid, uint16_t devno);
>> +void css_subch_assign(uint8_t cssid, uint8_t ssid, uint16_t schid, uint16_t devno,
>> + SubchDev *sch);
>> void css_sch_build_virtual_schib(SubchDev *sch, uint8_t chpid, uint8_t type);
>> void css_reset(void);
>> void css_reset_sch(SubchDev *sch);
>> diff --git a/hw/s390x/virtio-ccw.c b/hw/s390x/virtio-ccw.c
>> new file mode 100644
>> index 0000000..28be1a7
>> --- /dev/null
>> +++ b/hw/s390x/virtio-ccw.c
>> @@ -0,0 +1,875 @@
>> +/*
>> + * virtio ccw target implementation
>> + *
>> + * Copyright 2012 IBM Corp.
>> + * Author(s): Cornelia Huck <cornelia.huck@xxxxxxxxxx>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or (at
>> + * your option) any later version. See the COPYING file in the top-level
>> + * directory.
>> + */
>> +
>> +#include <hw/hw.h>
>
> #include "hw.h"
>
>> +#include "block.h"
>> +#include "blockdev.h"
>> +#include "sysemu.h"
>> +#include "net.h"
>> +#include "monitor.h"
>> +#include "qemu-thread.h"
>> +#include "hw/virtio.h"
>> +#include "hw/virtio-serial.h"
>> +#include "hw/virtio-net.h"
>> +#include "hw/sysbus.h"
>> +#include "bitops.h"
>> +
>> +#include "ioinst.h"
>> +#include "css.h"
>> +#include "virtio-ccw.h"
>> +
>> +static const TypeInfo virtio_ccw_bus_info = {
>> + .name = TYPE_VIRTIO_CCW_BUS,
>> + .parent = TYPE_BUS,
>> + .instance_size = sizeof(VirtioCcwBus),
>> +};
>> +
>> +static const VirtIOBindings virtio_ccw_bindings;
>> +
>> +VirtIODevice *virtio_ccw_get_vdev(SubchDev *sch)
>> +{
>> + VirtIODevice *vdev = NULL;
>> +
>> + if (sch->driver_data) {
>> + vdev = ((VirtioCcwData *)sch->driver_data)->vdev;
>> + }
>> + return vdev;
>> +}
>> +
>> +static void virtio_ccw_reset_subchannels(void *opaque)
>> +{
>> + VirtioCcwBus *bus = opaque;
>> + BusChild *kid;
>> + VirtioCcwData *data;
>> +
>> + QTAILQ_FOREACH(kid, &bus->bus.children, sibling) {
>> + data = (VirtioCcwData *)kid->child;
>> + virtio_reset(data->vdev);
>> + css_reset_sch(data->sch);
>> + }
>> + css_reset();
>> +}
>> +
>> +VirtioCcwBus *virtio_ccw_bus_init(void)
>> +{
>> + VirtioCcwBus *cbus;
>> + BusState *bus;
>> + DeviceState *dev;
>> +
>> + /* Create bridge device */
>> + dev = qdev_create(NULL, "virtio-ccw-bridge");
>> + qdev_init_nofail(dev);
>> +
>> + /* Create bus on bridge device */
>> + bus = qbus_create(TYPE_VIRTIO_CCW_BUS, dev, "virtio-ccw");
>> + cbus = DO_UPCAST(VirtioCcwBus, bus, bus);
>> +
>> + /* Enable hotplugging */
>> + bus->allow_hotplug = 1;
>> +
>> + qemu_register_reset(virtio_ccw_reset_subchannels, cbus);
>> + return cbus;
>> +}
>> +
>> +/* Communication blocks used by several channel commands. */
>> +typedef struct VqInfoBlock {
>> + uint64_t queue;
>> + uint32_t align;
>> + uint16_t index;
>> + uint16_t num;
>> +} QEMU_PACKED VqInfoBlock;
>> +
>> +typedef struct VqConfigBlock {
>> + uint16_t index;
>> + uint16_t num_max;
>> +} QEMU_PACKED VqConfigBlock;
>> +
>> +typedef struct VirtioFeatDesc {
>> + uint32_t features;
>> + uint8_t index;
>> +} QEMU_PACKED VirtioFeatDesc;
>> +
>> +/* Specify where the virtqueues for the subchannel are in guest memory. */
>> +static int virtio_ccw_set_vqs(SubchDev *sch, uint64_t addr, uint32_t align,
>> + uint16_t index, uint16_t num)
>> +{
>> + VirtioCcwData *data = sch->driver_data;
>> +
>> + if (index > VIRTIO_PCI_QUEUE_MAX) {
>> + return -EINVAL;
>> + }
>> +
>> + /* Current code in virtio.c relies on 4K alignment. */
>> + if (align != 4096) {
>> + return -EINVAL;
>> + }
>> +
>> + if (!data) {
>> + return -EINVAL;
>> + }
>> +
>> + virtio_queue_set_addr(data->vdev, index, addr);
>> + if (!addr) {
>> + virtio_queue_set_vector(data->vdev, index, 0);
>> + } else {
>> + /* Fail if we don't have a big enough queue. */
>> + /* TODO: Add interface to handle vring.num changing */
>> + if (virtio_queue_get_num(data->vdev, index) > num) {
>> + return -EINVAL;
>> + }
>> + virtio_queue_set_vector(data->vdev, index, index);
>> + }
>> + return 0;
>> +}
>> +
>> +static int virtio_ccw_cb(SubchDev *sch, CCW1 *ccw)
>> +{
>> + int ret;
>> + VqInfoBlock info;
>> + uint8_t status;
>> + VirtioFeatDesc features;
>> + void *config;
>> + uint64_t *indicators;
>> + VqConfigBlock vq_config;
>> + VirtioCcwData *data = sch->driver_data;
>> + bool check_len;
>> + int len;
>> +
>> + if (!ccw) {
>> + return -EIO;
>> + }
>> +
>> + if (!data) {
>> + return -EINVAL;
>> + }
>> +
>> + check_len = !((ccw->flags & CCW_FLAG_SLI) && !(ccw->flags & CCW_FLAG_DC));
>> +
>> + /* Look at the command. */
>> + switch (ccw->cmd_code) {
>> + case CCW_CMD_SET_VQ:
>> + if (check_len) {
>> + if (ccw->count != sizeof(info)) {
>> + ret = -EINVAL;
>> + break;
>> + }
>> + } else if (ccw->count < sizeof(info)) {
>> + /* Can't execute command. */
>> + ret = -EINVAL;
>> + break;
>> + }
>> + if (!qemu_get_ram_ptr(ccw->cda)) {
>> + ret = -EFAULT;
>
> This is an interesting check. But I don't think we want to spread
> qemu_get_ram_ptr() around so perhaps you can introduce a
> qemu_is_ram_addr_valid() call?
>
>> + } else {
>> + info.queue = ldq_phys(ccw->cda);
>> + info.align = ldl_phys(ccw->cda + sizeof(info.queue));
>> + info.index = lduw_phys(ccw->cda + sizeof(info.queue)
>> + + sizeof(info.align));
>> + info.num = lduw_phys(ccw->cda + sizeof(info.queue)
>> + + sizeof(info.align)
>> + + sizeof(info.index));
>> + ret = virtio_ccw_set_vqs(sch, info.queue, info.align, info.index,
>> + info.num);
>> + sch->curr_status.scsw.count = 0;
>> + }
>> + break;
>> + case CCW_CMD_VDEV_RESET:
>> + virtio_reset(data->vdev);
>> + ret = 0;
>> + break;
>> + case CCW_CMD_READ_FEAT:
>> + if (check_len) {
>> + if (ccw->count != sizeof(features)) {
>> + ret = -EINVAL;
>> + break;
>> + }
>> + } else if (ccw->count < sizeof(features)) {
>> + /* Can't execute command. */
>> + ret = -EINVAL;
>> + break;
>> + }
>> + if (!qemu_get_ram_ptr(ccw->cda)) {
>> + ret = -EFAULT;
>> + } else {
>> + features.index = ldub_phys(ccw->cda + sizeof(features.features));
>> + if (features.index < ARRAY_SIZE(data->host_features)) {
>> + features.features = data->host_features[features.index];
>> + } else {
>> + /* Return zeroes if the guest supports more feature bits. */
>> + features.features = 0;
>> + }
>> + stw_le_phys(ccw->cda, features.features);
>> + sch->curr_status.scsw.count = ccw->count - sizeof(features);
>> + ret = 0;
>> + }
>> + break;
>> + case CCW_CMD_WRITE_FEAT:
>> + if (check_len) {
>> + if (ccw->count != sizeof(features)) {
>> + ret = -EINVAL;
>> + break;
>> + }
>> + } else if (ccw->count < sizeof(features)) {
>> + /* Can't execute command. */
>> + ret = -EINVAL;
>> + break;
>> + }
>> + if (!qemu_get_ram_ptr(ccw->cda)) {
>> + ret = -EFAULT;
>> + } else {
>> + features.index = ldub_phys(ccw->cda + sizeof(features.features));
>> + features.features = bswap32(lduw_phys(ccw->cda));
>> + if (features.index < ARRAY_SIZE(data->host_features)) {
>> + if (data->vdev->set_features) {
>> + data->vdev->set_features(data->vdev, features.features);
>> + }
>> + data->vdev->guest_features = features.features;
>> + } else {
>> + /*
>> + * If the guest supports more feature bits, assert that it
>> + * passes us zeroes for those we don't support.
>> + */
>> + if (features.features) {
>> + fprintf(stderr, "Guest bug: features[%i]=%x (expected 0)\n",
>> + features.index, features.features);
>> + /* XXX: do a unit check here? */
>
> In general, we try to avoid guest initiated printf()s. libvirt blindly
> logs stdio from QEMU to the disk file system and a malicious guest
> could, in theory, exhaust the host disk space.
>
>> + }
>> + }
>> + sch->curr_status.scsw.count = ccw->count - sizeof(features);
>> + ret = 0;
>> + }
>> + break;
>> + case CCW_CMD_READ_CONF:
>> + if (check_len) {
>> + if (ccw->count > data->vdev->config_len) {
>> + ret = -EINVAL;
>> + break;
>> + }
>> + }
>> + len = MIN(ccw->count, data->vdev->config_len);
>> + if (!qemu_get_ram_ptr(ccw->cda)) {
>> + ret = -EFAULT;
>> + } else {
>> + data->vdev->get_config(data->vdev, data->vdev->config);
>> + cpu_physical_memory_write(ccw->cda, data->vdev->config, len);
>> + sch->curr_status.scsw.count = ccw->count - len;
>> + ret = 0;
>> + }
>> + break;
>> + case CCW_CMD_WRITE_CONF:
>> + if (check_len) {
>> + if (ccw->count > data->vdev->config_len) {
>> + ret = -EINVAL;
>> + break;
>> + }
>> + }
>> + len = MIN(ccw->count, data->vdev->config_len);
>> + config = qemu_get_ram_ptr(ccw->cda);
>> + if (!config) {
>> + ret = -EFAULT;
>> + } else {
>> + memcpy(data->vdev->config, config, len);
>> + if (data->vdev->set_config) {
>> + data->vdev->set_config(data->vdev, data->vdev->config);
>> + }
>> + sch->curr_status.scsw.count = ccw->count - len;
>> + ret = 0;
>> + }
>> + break;
>> + case CCW_CMD_WRITE_STATUS:
>> + if (check_len) {
>> + if (ccw->count != sizeof(status)) {
>> + ret = -EINVAL;
>> + break;
>> + }
>> + } else if (ccw->count < sizeof(status)) {
>> + /* Can't execute command. */
>> + ret = -EINVAL;
>> + break;
>> + }
>> + if (!qemu_get_ram_ptr(ccw->cda)) {
>> + ret = -EFAULT;
>> + } else {
>> + status = ldub_phys(ccw->cda);
>> + virtio_set_status(data->vdev, status);
>> + sch->curr_status.scsw.count = ccw->count - sizeof(status);
>> + ret = 0;
>> + }
>> + break;
>> + case CCW_CMD_SET_IND:
>> + if (check_len) {
>> + if (ccw->count != sizeof(*indicators)) {
>> + ret = -EINVAL;
>> + break;
>> + }
>> + } else if (ccw->count < sizeof(*indicators)) {
>> + /* Can't execute command. */
>> + ret = -EINVAL;
>> + break;
>> + }
>> + indicators = qemu_get_ram_ptr(ccw->cda);
>> + if (!indicators) {
>> + ret = -EFAULT;
>> + } else {
>> + data->indicators = ccw->cda;
>> + sch->curr_status.scsw.count = ccw->count - sizeof(*indicators);
>> + ret = 0;
>> + }
>> + break;
>> + case CCW_CMD_READ_VQ_CONF:
>> + if (check_len) {
>> + if (ccw->count != sizeof(vq_config)) {
>> + ret = -EINVAL;
>> + break;
>> + }
>> + } else if (ccw->count < sizeof(vq_config)) {
>> + /* Can't execute command. */
>> + ret = -EINVAL;
>> + break;
>> + }
>> + if (!qemu_get_ram_ptr(ccw->cda)) {
>> + ret = -EFAULT;
>> + } else {
>> + vq_config.index = lduw_phys(ccw->cda);
>> + vq_config.num_max = virtio_queue_get_num(data->vdev,
>> + vq_config.index);
>> + stw_phys(ccw->cda + sizeof(vq_config.index), vq_config.num_max);
>> + sch->curr_status.scsw.count = ccw->count - sizeof(vq_config);
>> + ret = 0;
>> + }
>> + break;
>> + default:
>> + ret = -EOPNOTSUPP;
>> + break;
>> + }
>> + return ret;
>> +}
>> +
>> +static int virtio_ccw_device_init(VirtioCcwData *dev, VirtIODevice *vdev)
>> +{
>> + unsigned int cssid = 0;
>> + unsigned int ssid = 0;
>> + unsigned int schid;
>> + unsigned int devno;
>> + bool have_devno = false;
>> + bool found = false;
>> + SubchDev *sch;
>> + int ret;
>> + int num;
>> +
>> + sch = g_malloc0(sizeof(SubchDev));
>> +
>> + sch->driver_data = dev;
>> + dev->sch = sch;
>> +
>> + dev->vdev = vdev;
>> + dev->indicators = 0;
>> +
>> + /* Initialize subchannel structure. */
>> + qemu_mutex_init(&sch->mutex);
>> + sch->channel_prog = NULL;
>> + sch->last_cmd = NULL;
>> + sch->orb = NULL;
>> + /*
>> + * Use a device number if provided. Otherwise, fall back to subchannel
>> + * number.
>> + */
>> + if (dev->bus_id) {
>> + num = sscanf(dev->bus_id, "%x.%x.%04x", &cssid, &ssid, &devno);
>> + if (num == 3) {
>> + if ((cssid > MAX_CSSID) || (ssid > MAX_SSID)) {
>> + ret = -EINVAL;
>> + error_report("Invalid cssid or ssid: cssid %x, ssid %x",
>> + cssid, ssid);
>> + goto out_err;
>> + }
>> + /* Enforce use of virtual cssid. */
>> + if (cssid != VIRTUAL_CSSID) {
>> + ret = -EINVAL;
>> + error_report("cssid %x not valid for virtio devices", cssid);
>> + goto out_err;
>> + }
>> + if (css_devno_used(cssid, ssid, devno)) {
>> + ret = -EEXIST;
>> + error_report("Device %x.%x.%04x already exists", cssid, ssid,
>> + devno);
>> + goto out_err;
>> + }
>> + sch->cssid = cssid;
>> + sch->ssid = ssid;
>> + sch->devno = devno;
>> + have_devno = true;
>> + } else {
>> + ret = -EINVAL;
>> + error_report("Malformed devno parameter '%s'", dev->bus_id);
>> + goto out_err;
>> + }
>> + }
>> +
>> + /* Find the next free id. */
>> + if (have_devno) {
>> + for (schid = 0; schid <= MAX_SCHID; schid++) {
>> + if (!css_find_subch(1, cssid, ssid, schid)) {
>> + sch->schid = schid;
>> + css_subch_assign(cssid, ssid, schid, devno, sch);
>> + found = true;
>> + break;
>> + }
>> + }
>> + if (!found) {
>> + ret = -ENODEV;
>> + error_report("No free subchannel found for %x.%x.%04x", cssid, ssid,
>> + devno);
>> + goto out_err;
>> + }
>> + } else {
>> + cssid = VIRTUAL_CSSID;
>> + for (ssid = 0; ssid <= MAX_SSID; ssid++) {
>> + for (schid = 0; schid <= MAX_SCHID; schid++) {
>> + if (!css_find_subch(1, cssid, ssid, schid)) {
>> + sch->cssid = cssid;
>> + sch->ssid = ssid;
>> + sch->schid = schid;
>> + devno = schid;
>> + /*
>> + * If the devno is already taken, look further in this
>> + * subchannel set.
>> + */
>> + while (css_devno_used(cssid, ssid, devno)) {
>> + if (devno == MAX_SCHID) {
>> + devno = 0;
>> + } else if (devno == schid - 1) {
>> + ret = -ENODEV;
>> + error_report("No free devno found");
>> + goto out_err;
>> + } else {
>> + devno++;
>> + }
>> + }
>> + sch->devno = devno;
>> + css_subch_assign(cssid, ssid, schid, devno, sch);
>> + found = true;
>> + break;
>> + }
>> + }
>> + if (found) {
>> + break;
>> + }
>> + }
>> + if (!found) {
>> + ret = -ENODEV;
>> + error_report("Virtual channel subsystem is full!");
>> + goto out_err;
>> + }
>> + }
>> +
>> + /* Build initial schib. */
>> + css_sch_build_virtual_schib(sch, 0, VIRTIO_CCW_CHPID_TYPE);
>> +
>> + sch->ccw_cb = virtio_ccw_cb;
>> +
>> + /* Build senseid data. */
>> + memset(&sch->id, 0, sizeof(SenseId));
>> + sch->id.reserved = 0xff;
>> + sch->id.cu_type = VIRTIO_CCW_CU_TYPE;
>> + sch->id.cu_model = dev->vdev->device_id;
>> +
>> + virtio_bind_device(vdev, &virtio_ccw_bindings, dev);
>> + /* Only the first 32 feature bits are used. */
>> + dev->host_features[0] = vdev->get_features(vdev, dev->host_features[0]);
>> +
>> + s390_sch_hotplug(sch->cssid, sch->ssid, sch->schid, sch->devno,
>> + &sch->curr_status, dev->qdev.hotplugged, 1, 1);
>> + return 0;
>> +
>> +out_err:
>> + dev->sch = NULL;
>> + g_free(sch);
>> + return ret;
>> +}
>> +
>> +static int virtio_ccw_exit(VirtioCcwData *dev)
>> +{
>> + SubchDev *sch = dev->sch;
>> +
>> + if (sch) {
>> + css_subch_assign(sch->cssid, sch->ssid, sch->schid, sch->devno, NULL);
>> + g_free(sch);
>> + }
>> + dev->indicators = 0;
>> + return 0;
>> +}
>> +
>> +static int virtio_ccw_net_init(VirtioCcwData *dev)
>> +{
>> + VirtIODevice *vdev;
>> +
>> + vdev = virtio_net_init((DeviceState *)dev, &dev->nic, &dev->net);
>> + if (!vdev) {
>> + return -1;
>> + }
>> +
>> + return virtio_ccw_device_init(dev, vdev);
>> +}
>> +
>> +static int virtio_ccw_net_exit(VirtioCcwData *dev)
>> +{
>> + virtio_net_exit(dev->vdev);
>> + return virtio_ccw_exit(dev);
>> +}
>> +
>> +static int virtio_ccw_blk_init(VirtioCcwData *dev)
>> +{
>> + VirtIODevice *vdev;
>> +
>> + vdev = virtio_blk_init((DeviceState *)dev, &dev->blk);
>> + if (!vdev) {
>> + return -1;
>> + }
>> +
>> + return virtio_ccw_device_init(dev, vdev);
>> +}
>> +
>> +static int virtio_ccw_blk_exit(VirtioCcwData *dev)
>> +{
>> + virtio_blk_exit(dev->vdev);
>> + blockdev_mark_auto_del(dev->blk.conf.bs);
>> + return virtio_ccw_exit(dev);
>> +}
>> +
>> +static int virtio_ccw_serial_init(VirtioCcwData *dev)
>> +{
>> + VirtioCcwBus *bus;
>> + VirtIODevice *vdev;
>> + int r;
>> +
>> + bus = DO_UPCAST(VirtioCcwBus, bus, dev->qdev.parent_bus);
>> +
>> + vdev = virtio_serial_init((DeviceState *)dev, &dev->serial);
>> + if (!vdev) {
>> + return -1;
>> + }
>> +
>> + r = virtio_ccw_device_init(dev, vdev);
>> + if (!r) {
>> + bus->console = dev;
>> + }
>> +
>> + return r;
>> +}
>> +
>> +static int virtio_ccw_serial_exit(VirtioCcwData *dev)
>> +{
>> + VirtioCcwBus *bus;
>> +
>> + bus = DO_UPCAST(VirtioCcwBus, bus, dev->qdev.parent_bus);
>> + bus->console = NULL;
>> + virtio_serial_exit(dev->vdev);
>> + return virtio_ccw_exit(dev);
>> +}
>> +
>> +static int virtio_ccw_balloon_init(VirtioCcwData *dev)
>> +{
>> + VirtIODevice *vdev;
>> +
>> + vdev = virtio_balloon_init((DeviceState *)dev);
>> + if (!vdev) {
>> + return -1;
>> + }
>> +
>> + return virtio_ccw_device_init(dev, vdev);
>> +}
>> +
>> +static int virtio_ccw_balloon_exit(VirtioCcwData *dev)
>> +{
>> + virtio_balloon_exit(dev->vdev);
>> + return virtio_ccw_exit(dev);
>> +}
>> +
>> +static int virtio_ccw_scsi_init(VirtioCcwData *dev)
>> +{
>> + VirtIODevice *vdev;
>> +
>> + vdev = virtio_scsi_init((DeviceState *)dev, &dev->scsi);
>> + if (!vdev) {
>> + return -1;
>> + }
>> +
>> + return virtio_ccw_device_init(dev, vdev);
>> +}
>> +
>> +static int virtio_ccw_scsi_exit(VirtioCcwData *dev)
>> +{
>> + virtio_scsi_exit(dev->vdev);
>> + return virtio_ccw_exit(dev);
>> +}
>> +
>> +VirtioCcwData *virtio_ccw_bus_console(VirtioCcwBus *bus)
>> +{
>> + return bus->console;
>> +}
>> +
>> +static void virtio_ccw_notify(void *opaque, uint16_t vector)
>> +{
>> + VirtioCcwData *dev = opaque;
>> + SubchDev *sch = dev->sch;
>> + uint64_t indicators;
>> +
>> + if (vector >= VIRTIO_PCI_QUEUE_MAX) {
>> + return;
>> + }
>> +
>> + qemu_mutex_lock(&sch->mutex);
>> + indicators = ldq_phys(dev->indicators);
>> + set_bit(vector, &indicators);
>> + stq_phys(dev->indicators, indicators);
>> +
>> + css_conditional_io_interrupt(sch);
>> +
>> + qemu_mutex_unlock(&sch->mutex);
>
> I don't understand the mutex here...
>
>> +}
>> +
>> +static unsigned virtio_ccw_get_features(void *opaque)
>> +{
>> + VirtioCcwData *dev = opaque;
>> +
>> + /* Only the first 32 feature bits are used. */
>> + return dev->host_features[0];
>> +}
>> +
>> +/**************** Virtio-ccw Bus Device Descriptions *******************/
>> +
>> +static const VirtIOBindings virtio_ccw_bindings = {
>> + .notify = virtio_ccw_notify,
>> + .get_features = virtio_ccw_get_features,
>> +};
>> +
>> +static Property virtio_ccw_net_properties[] = {
>> + DEFINE_PROP_STRING("devno", VirtioCcwData, bus_id),
>> + DEFINE_NIC_PROPERTIES(VirtioCcwData, nic),
>> + DEFINE_PROP_UINT32("x-txtimer", VirtioCcwData,
>> + net.txtimer, TX_TIMER_INTERVAL),
>> + DEFINE_PROP_INT32("x-txburst", VirtioCcwData,
>> + net.txburst, TX_BURST),
>> + DEFINE_PROP_STRING("tx", VirtioCcwData, net.tx),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void virtio_ccw_net_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> + VirtIOCCWDeviceClass *k = VIRTIO_CCW_DEVICE_CLASS(klass);
>> +
>> + k->init = virtio_ccw_net_init;
>> + k->exit = virtio_ccw_net_exit;
>> + dc->props = virtio_ccw_net_properties;
>> +}
>> +
>> +static TypeInfo virtio_ccw_net = {
>> + .name = "virtio-net-ccw",
>> + .parent = TYPE_VIRTIO_CCW_DEVICE,
>> + .instance_size = sizeof(VirtioCcwData),
>> + .class_init = virtio_ccw_net_class_init,
>> +};
>> +
>> +static Property virtio_ccw_blk_properties[] = {
>> + DEFINE_PROP_STRING("devno", VirtioCcwData, bus_id),
>> + DEFINE_BLOCK_PROPERTIES(VirtioCcwData, blk.conf),
>> + DEFINE_PROP_STRING("serial", VirtioCcwData, blk.serial),
>> +#ifdef __linux__
>> + DEFINE_PROP_BIT("scsi", VirtioCcwData, blk.scsi, 0, true),
>> +#endif
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void virtio_ccw_blk_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> + VirtIOCCWDeviceClass *k = VIRTIO_CCW_DEVICE_CLASS(klass);
>> +
>> + k->init = virtio_ccw_blk_init;
>> + k->exit = virtio_ccw_blk_exit;
>> + dc->props = virtio_ccw_blk_properties;
>> +}
>> +
>> +static TypeInfo virtio_ccw_blk = {
>> + .name = "virtio-blk-ccw",
>> + .parent = TYPE_VIRTIO_CCW_DEVICE,
>> + .instance_size = sizeof(VirtioCcwData),
>> + .class_init = virtio_ccw_blk_class_init,
>> +};
>> +
>> +static Property virtio_ccw_serial_properties[] = {
>> + DEFINE_PROP_STRING("devno", VirtioCcwData, bus_id),
>> + DEFINE_PROP_UINT32("max_ports", VirtioCcwData, serial.max_virtserial_ports,
>> + 31),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void virtio_ccw_serial_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> + VirtIOCCWDeviceClass *k = VIRTIO_CCW_DEVICE_CLASS(klass);
>> +
>> + k->init = virtio_ccw_serial_init;
>> + k->exit = virtio_ccw_serial_exit;
>> + dc->props = virtio_ccw_serial_properties;
>> +}
>> +
>> +static TypeInfo virtio_ccw_serial = {
>> + .name = "virtio-serial-ccw",
>> + .parent = TYPE_VIRTIO_CCW_DEVICE,
>> + .instance_size = sizeof(VirtioCcwData),
>> + .class_init = virtio_ccw_serial_class_init,
>> +};
>> +
>> +static Property virtio_ccw_balloon_properties[] = {
>> + DEFINE_PROP_STRING("devno", VirtioCcwData, bus_id),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void virtio_ccw_balloon_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> + VirtIOCCWDeviceClass *k = VIRTIO_CCW_DEVICE_CLASS(klass);
>> +
>> + k->init = virtio_ccw_balloon_init;
>> + k->exit = virtio_ccw_balloon_exit;
>> + dc->props = virtio_ccw_balloon_properties;
>> +}
>> +
>> +static TypeInfo virtio_ccw_balloon = {
>> + .name = "virtio-balloon-ccw",
>> + .parent = TYPE_VIRTIO_CCW_DEVICE,
>> + .instance_size = sizeof(VirtioCcwData),
>> + .class_init = virtio_ccw_balloon_class_init,
>> +};
>> +
>> +static Property virtio_ccw_scsi_properties[] = {
>> + DEFINE_PROP_STRING("devno", VirtioCcwData, bus_id),
>> + DEFINE_VIRTIO_SCSI_PROPERTIES(VirtioCcwData, host_features[0], scsi),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void virtio_ccw_scsi_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> + VirtIOCCWDeviceClass *k = VIRTIO_CCW_DEVICE_CLASS(klass);
>> +
>> + k->init = virtio_ccw_scsi_init;
>> + k->exit = virtio_ccw_scsi_exit;
>> + dc->props = virtio_ccw_scsi_properties;
>> +}
>> +
>> +static TypeInfo virtio_ccw_scsi = {
>> + .name = "virtio-scsi-ccw",
>> + .parent = TYPE_VIRTIO_CCW_DEVICE,
>> + .instance_size = sizeof(VirtioCcwData),
>> + .class_init = virtio_ccw_scsi_class_init,
>> +};
>> +
>> +static int virtio_ccw_busdev_init(DeviceState *dev)
>> +{
>> + VirtioCcwData *_dev = (VirtioCcwData *)dev;
>> + VirtIOCCWDeviceClass *_info = VIRTIO_CCW_DEVICE_GET_CLASS(dev);
>> +
>> + return _info->init(_dev);
>> +}
>> +
>> +static int virtio_ccw_busdev_exit(DeviceState *dev)
>> +{
>> + VirtioCcwData *_dev = (VirtioCcwData *)dev;
>> + VirtIOCCWDeviceClass *_info = VIRTIO_CCW_DEVICE_GET_CLASS(dev);
>> +
>> + return _info->exit(_dev);
>> +}
>> +
>> +static int virtio_ccw_busdev_unplug(DeviceState *dev)
>> +{
>> + VirtioCcwData *_dev = (VirtioCcwData *)dev;
>> + SubchDev *sch = _dev->sch;
>> +
>> + /*
>> + * We should arrive here only for device_del, since we don't support
>> + * direct hot(un)plug of channels, but only through virtio.
>> + */
>> + assert(sch != NULL);
>> + /* Subchannel is now disabled and no longer valid. */
>> + qemu_mutex_lock(&sch->mutex);
>> + sch->curr_status.pmcw.ena = 0;
>> + sch->curr_status.pmcw.dnv = 0;
>> + qemu_mutex_unlock(&sch->mutex);
>> +
>> + s390_sch_hotplug(sch->cssid, sch->ssid, sch->schid, sch->devno,
>> + &sch->curr_status, 1, 0, 1);
>> +
>> + object_unparent(OBJECT(dev));
>> + qdev_free(dev);
>> + return 0;
>> +}
>> +
>> +static void virtio_ccw_device_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> +
>> + dc->init = virtio_ccw_busdev_init;
>> + dc->exit = virtio_ccw_busdev_exit;
>> + dc->unplug = virtio_ccw_busdev_unplug;
>> + dc->bus_type = TYPE_VIRTIO_CCW_BUS;
>> +
>> +}
>> +
>> +static TypeInfo virtio_ccw_device_info = {
>> + .name = TYPE_VIRTIO_CCW_DEVICE,
>> + .parent = TYPE_DEVICE,
>> + .instance_size = sizeof(VirtioCcwData),
>> + .class_init = virtio_ccw_device_class_init,
>> + .class_size = sizeof(VirtIOCCWDeviceClass),
>> + .abstract = true,
>> +};
>> +
>> +/***************** Virtio-ccw Bus Bridge Device ********************/
>> +/* Only required to have the virtio bus as child in the system bus */
>> +
>> +static int virtio_ccw_bridge_init(SysBusDevice *dev)
>> +{
>> + /* nothing */
>> + return 0;
>> +}
>> +
>> +static void virtio_ccw_bridge_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
>> +
>> + k->init = virtio_ccw_bridge_init;
>> + dc->no_user = 1;
>> +}
>> +
>> +static TypeInfo virtio_ccw_bridge_info = {
>> + .name = "virtio-ccw-bridge",
>> + .parent = TYPE_SYS_BUS_DEVICE,
>> + .instance_size = sizeof(SysBusDevice),
>> + .class_init = virtio_ccw_bridge_class_init,
>> +};
>> +
>> +static void virtio_ccw_register(void)
>> +{
>> + type_register_static(&virtio_ccw_bus_info);
>> + type_register_static(&virtio_ccw_device_info);
>> + type_register_static(&virtio_ccw_serial);
>> + type_register_static(&virtio_ccw_blk);
>> + type_register_static(&virtio_ccw_net);
>> + type_register_static(&virtio_ccw_balloon);
>> + type_register_static(&virtio_ccw_scsi);
>> + type_register_static(&virtio_ccw_bridge_info);
>> +}
>> +type_init(virtio_ccw_register);
>> diff --git a/hw/s390x/virtio-ccw.h b/hw/s390x/virtio-ccw.h
>> new file mode 100644
>> index 0000000..8125acf
>> --- /dev/null
>> +++ b/hw/s390x/virtio-ccw.h
>> @@ -0,0 +1,79 @@
>> +/*
>> + * virtio ccw target definitions
>> + *
>> + * Copyright 2012 IBM Corp.
>> + * Author(s): Cornelia Huck <cornelia.huck@xxxxxxxxxx>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or (at
>> + * your option) any later version. See the COPYING file in the top-level
>> + * directory.
>> + */
>> +
>> +#include <hw/virtio-blk.h>
>> +#include <hw/virtio-net.h>
>> +#include <hw/virtio-serial.h>
>> +#include <hw/virtio-scsi.h>
>> +
>> +#define VIRTUAL_CSSID 0xfe
>> +
>> +#define VIRTIO_CCW_CU_TYPE 0x3832
>> +#define VIRTIO_CCW_CHPID_TYPE 0x32
>> +
>> +#define CCW_CMD_SET_VQ 0x13
>> +#define CCW_CMD_VDEV_RESET 0x33
>> +#define CCW_CMD_READ_FEAT 0x12
>> +#define CCW_CMD_WRITE_FEAT 0x11
>> +#define CCW_CMD_READ_CONF 0x22
>> +#define CCW_CMD_WRITE_CONF 0x21
>> +#define CCW_CMD_WRITE_STATUS 0x31
>> +#define CCW_CMD_SET_IND 0x43
>> +#define CCW_CMD_READ_VQ_CONF 0x32
>> +
>> +#define TYPE_VIRTIO_CCW_DEVICE "virtio-ccw-device"
>> +#define VIRTIO_CCW_DEVICE(obj) \
>> + OBJECT_CHECK(VirtioCcwData, (obj), TYPE_VIRTIO_CCW_DEVICE)
>> +#define VIRTIO_CCW_DEVICE_CLASS(klass) \
>> + OBJECT_CLASS_CHECK(VirtIOCCWDeviceClass, (klass), TYPE_VIRTIO_CCW_DEVICE)
>> +#define VIRTIO_CCW_DEVICE_GET_CLASS(obj) \
>> + OBJECT_GET_CLASS(VirtIOCCWDeviceClass, (obj), TYPE_VIRTIO_CCW_DEVICE)
>> +
>> +#define TYPE_VIRTIO_CCW_BUS "virtio-ccw-bus"
>> +#define VIRTIO_CCW_BUS(obj) \
>> + OBJECT_CHECK(VirtioCcwBus, (obj), TYPE_VIRTIO_CCW_BUS)
>> +
>> +typedef struct VirtioCcwData VirtioCcwData;
>> +
>> +typedef struct VirtIOCCWDeviceClass {
>> + DeviceClass qdev;
>> + int (*init)(VirtioCcwData *dev);
>> + int (*exit)(VirtioCcwData *dev);
>> +} VirtIOCCWDeviceClass;
>> +
>> +/* Change here if we want to support more feature bits. */
>> +#define VIRTIO_CCW_FEATURE_SIZE 1
>> +
>> +struct VirtioCcwData {
>> + DeviceState qdev;
>> + SubchDev *sch;
>> + VirtIODevice *vdev;
>> + char *bus_id;
>> + VirtIOBlkConf blk;
>> + NICConf nic;
>> + uint32_t host_features[VIRTIO_CCW_FEATURE_SIZE];
>> + virtio_serial_conf serial;
>> + virtio_net_conf net;
>> + VirtIOSCSIConf scsi;
>> + /* Guest provided values: */
>> + target_phys_addr_t indicators;
>> +};
>> +
>> +/* virtio-ccw bus type */
>> +typedef struct VirtioCcwBus {
>> + BusState bus;
>> + VirtioCcwData *console;
>> +} VirtioCcwBus;
>> +
>> +VirtioCcwBus *virtio_ccw_bus_init(void);
>> +void virtio_ccw_device_update_status(SubchDev *sch);
>> +VirtioCcwData *virtio_ccw_bus_console(VirtioCcwBus *bus);
>> +VirtIODevice *virtio_ccw_get_vdev(SubchDev *sch);
>> diff --git a/vl.c b/vl.c
>> index 7c577fa..2b8cae6 100644
>> --- a/vl.c
>> +++ b/vl.c
>> @@ -289,6 +289,7 @@ static struct {
>> { .driver = "scsi-cd", .flag = &default_cdrom },
>> { .driver = "virtio-serial-pci", .flag = &default_virtcon },
>> { .driver = "virtio-serial-s390", .flag = &default_virtcon },
>> + { .driver = "virtio-serial-ccw", .flag = &default_virtcon },
>> { .driver = "virtio-serial", .flag = &default_virtcon },
>> { .driver = "VGA", .flag = &default_vga },
>> { .driver = "isa-vga", .flag = &default_vga },
>> --
>> 1.7.11.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe kvm" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
