Re: [PATCH v8 3/6] kvm: Add IRQ source ID option to KVM_IRQFD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2012-08-15 at 16:49 +0300, Michael S. Tsirkin wrote:
> On Fri, Aug 10, 2012 at 04:37:33PM -0600, Alex Williamson wrote:
> > This allows specifying an IRQ source ID to be used when injecting an
> > interrupt.  When not specified KVM_USERSPACE_IRQ_SOURCE_ID is used.
> > 
> > Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > ---
> > 
> >  Documentation/virtual/kvm/api.txt |    5 +++++
> >  arch/x86/kvm/x86.c                |    1 +
> >  include/linux/kvm.h               |    6 +++++-
> >  virt/kvm/eventfd.c                |   14 ++++++++++----
> >  4 files changed, 21 insertions(+), 5 deletions(-)
> > 
> > diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> > index 062cfd5..46f4b4d 100644
> > --- a/Documentation/virtual/kvm/api.txt
> > +++ b/Documentation/virtual/kvm/api.txt
> > @@ -1946,6 +1946,11 @@ the guest using the specified gsi pin.  The irqfd is removed using
> >  the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
> >  and kvm_irqfd.gsi.
> >  
> > +When KVM_CAP_IRQFD_IRQ_SOURCE_ID is available, KVM_IRQFD supports the
> > +KVM_IRQFD_FLAG_IRQ_SOURCE_ID which can be used to specify an IRQ
> > +source ID (see KVM_IRQ_SOURCE_ID) to be used for the guest interrupt.
> > +This flag has no effect on deassignment.
> > +
> >  4.76 KVM_PPC_ALLOCATE_HTAB
> >  
> >  Capability: KVM_CAP_PPC_ALLOC_HTAB
> > diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> > index 75e743e..946c5bd 100644
> > --- a/arch/x86/kvm/x86.c
> > +++ b/arch/x86/kvm/x86.c
> > @@ -2174,6 +2174,7 @@ int kvm_dev_ioctl_check_extension(long ext)
> >  	case KVM_CAP_GET_TSC_KHZ:
> >  	case KVM_CAP_PCI_2_3:
> >  	case KVM_CAP_KVMCLOCK_CTRL:
> > +	case KVM_CAP_IRQFD_IRQ_SOURCE_ID:
> >  		r = 1;
> >  		break;
> >  	case KVM_CAP_COALESCED_MMIO:
> > diff --git a/include/linux/kvm.h b/include/linux/kvm.h
> > index 67b6b49..deda8a9 100644
> > --- a/include/linux/kvm.h
> > +++ b/include/linux/kvm.h
> > @@ -619,6 +619,7 @@ struct kvm_ppc_smmu_info {
> >  #define KVM_CAP_S390_COW 79
> >  #define KVM_CAP_PPC_ALLOC_HTAB 80
> >  #define KVM_CAP_NR_IRQ_SOURCE_ID 81
> > +#define KVM_CAP_IRQFD_IRQ_SOURCE_ID 82
> >  
> >  #ifdef KVM_CAP_IRQ_ROUTING
> >  
> > @@ -684,12 +685,15 @@ struct kvm_xen_hvm_config {
> >  #endif
> >  
> >  #define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
> > +/* Available with KVM_CAP_IRQFD_IRQ_SOURCE_ID */
> > +#define KVM_IRQFD_FLAG_IRQ_SOURCE_ID (1 << 1)
> >  
> >  struct kvm_irqfd {
> >  	__u32 fd;
> >  	__u32 gsi;
> >  	__u32 flags;
> > -	__u8  pad[20];
> > +	__u32 irq_source_id;
> > +	__u8  pad[16];
> >  };
> >  
> >  #define KVM_IRQ_SOURCE_ID_FLAG_DEASSIGN (1 << 0)
> > diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
> > index 7d7e2aa..30150f1 100644
> > --- a/virt/kvm/eventfd.c
> > +++ b/virt/kvm/eventfd.c
> > @@ -51,6 +51,7 @@ struct _irqfd {
> >  	struct kvm_kernel_irq_routing_entry __rcu *irq_entry;
> >  	/* Used for level IRQ fast-path */
> >  	int gsi;
> > +	int irq_source_id;
> >  	struct work_struct inject;
> >  	/* Used for setup/shutdown */
> >  	struct eventfd_ctx *eventfd;
> > @@ -67,8 +68,8 @@ irqfd_inject(struct work_struct *work)
> >  	struct _irqfd *irqfd = container_of(work, struct _irqfd, inject);
> >  	struct kvm *kvm = irqfd->kvm;
> >  
> > -	kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID, irqfd->gsi, 1);
> > -	kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID, irqfd->gsi, 0);
> > +	kvm_set_irq(kvm, irqfd->irq_source_id, irqfd->gsi, 1);
> > +	kvm_set_irq(kvm, irqfd->irq_source_id, irqfd->gsi, 0);
> 
> Looks like this can lead to kernel data corruption if irq_source_id
> specified it out of range?

Yep, we need range checking and maybe even cross check against user
allocated IDs.

> >  }
> >  
> >  /*
> > @@ -138,7 +139,7 @@ irqfd_wakeup(wait_queue_t *wait, unsigned mode, int sync, void *key)
> >  		irq = rcu_dereference(irqfd->irq_entry);
> >  		/* An event has been signaled, inject an interrupt */
> >  		if (irq)
> > -			kvm_set_msi(irq, kvm, KVM_USERSPACE_IRQ_SOURCE_ID, 1);
> > +			kvm_set_msi(irq, kvm, irqfd->irq_source_id, 1);
> >  		else
> >  			schedule_work(&irqfd->inject);
> >  		rcu_read_unlock();
> > @@ -213,6 +214,10 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
> >  
> >  	irqfd->kvm = kvm;
> >  	irqfd->gsi = args->gsi;
> > +	if (args->flags & KVM_IRQFD_FLAG_IRQ_SOURCE_ID)
> > +		irqfd->irq_source_id = args->irq_source_id;
> > +	else
> > +		irqfd->irq_source_id = KVM_USERSPACE_IRQ_SOURCE_ID;
> 
> As in the previous patch, there is no validation
> that source id was previously allocated to userspace, so this makes life
> harder for userspace: if it deassigns a used source ID the result is not
> a clean failure but hard to find bugs.

Yep, good point.  Some trivial bitmap management should fix this.

> >  	INIT_LIST_HEAD(&irqfd->list);
> >  	INIT_WORK(&irqfd->inject, irqfd_inject);
> >  	INIT_WORK(&irqfd->shutdown, irqfd_shutdown);
> > @@ -340,7 +345,8 @@ kvm_irqfd_deassign(struct kvm *kvm, struct kvm_irqfd *args)
> >  int
> >  kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
> >  {
> > -	if (args->flags & ~KVM_IRQFD_FLAG_DEASSIGN)
> > +	if (args->flags & ~(KVM_IRQFD_FLAG_DEASSIGN |
> > +			    KVM_IRQFD_FLAG_IRQ_SOURCE_ID))
> >  		return -EINVAL;
> >  
> >  	if (args->flags & KVM_IRQFD_FLAG_DEASSIGN)

Summary:
      * user allocation bitmap needs to be cross-referenced by consumers
        of user passed source IDs.

Thanks,

Alex

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux