On Thu, Aug 09, 2012 at 10:27:43PM +0400, Michael Tokarev wrote:
> As a follow-up to the patch "tsc: use kvmclock for
> calibration".
>
> There's another problem reported by several users.
> The sympthom is that grub does not show boot menu,
> it boots default entry right away without any pause.
>
> After quite some debugging it turned out to be
> TSC issue. Grub uses tsc for its timeout handling.
> When setting timeout to some very large value
> (10000), I can see the counter is ticking backwards
> at a very high speed, ticking from 10000 to 0 in
> about 5 seconds.
>
> Running kvm -cpu host,-tsc forces grub to use
> rtc clocksource, and the problem goes away.
>
Can you try -no-kvm-pit-reinjection please.
> The most interesting thing is that this is a
> problem new for qemu-kvm 1.1 (and is still
> present in current git), 1.0 version had no
> such issue. And it only happens when in-kernel
> irqchip is enabled -- running with -no-kvm-irqchip
> also fixes the grub problem, so that tsc starts
> counting "correctly" for grub again.
>
1.0 work on the same kernel 1.1 doesn't?
>
> FWIW, here's the TSC calibration routine from
> grub:
>
> /* Calibrate the TSC based on the RTC. */
Comment claims RTC but code calls grub_pit_wait().
> static void
> calibrate_tsc (void)
> {
> /* First calibrate the TSC rate (relative, not absolute time). */
> grub_uint64_t start_tsc;
> grub_uint64_t end_tsc;
>
> start_tsc = grub_get_tsc ();
> grub_pit_wait (0xffff);
> end_tsc = grub_get_tsc ();
>
> tsc_ticks_per_ms = grub_divmod64 (end_tsc - start_tsc, 55, 0);
> }
>
> Thanks,
>
> /mjt
--
Gleb.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
