Re: vhost-scsi port to v1.1.0 + MSI-X performance regression

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2012-07-24 at 09:57 +0200, Jan Kiszka wrote:
> On 2012-07-24 09:42, Nicholas A. Bellinger wrote:
> > Hi Anthony, Stefan & QEMU folks,
> > 

<SNIP>

> > However, thus far I've not been able to get virtio-scsi <-> tcm_vhost
> > I/O to actually work against the latest qemu.git/master..  
> > 
> > So while doing a (manual) bisection w/ this series to track down the
> > issue with qemu/master, I managed to run across something else..  With
> > the vhost-scsi series applied, everything is working as expected up
> > until the following commit:
> > 
> > commit 1523ed9e1d46b0b54540049d491475ccac7e6421
> > Author: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
> > Date:   Thu May 17 10:32:39 2012 -0300
> > 
> >     virtio/vhost: Add support for KVM in-kernel MSI injection
> > 
> > 
> > This commit ends up triggering the following assert immediately after
> > starting qemu with virtio-scsi <-> tcm_vhost:
> > 
> > qemu-system-x86_64: /usr/src/qemu.git/hw/msix.c:515:
> >        msix_unset_vector_notifiers: Assertion `dev->msix_vector_use_notifier &&
> >                                     dev->msix_vector_release_notifier' failed.
> > 
> > OK, so adding the following hack allows me to boot:
> > 
> > diff --git a/hw/msix.c b/hw/msix.c
> > index 59c7a83..6036909 100644
> > --- a/hw/msix.c
> > +++ b/hw/msix.c
> > @@ -511,6 +511,11 @@ void msix_unset_vector_notifiers(PCIDevice *dev)
> >  {
> >      int vector;
> >  
> > +    if (!dev->msix_vector_use_notifier && !dev->msix_vector_release_notifier) {
> > +        printf("Hit NULL msix_unset_vector_notifiers for: %s\n", dev->name);
> > +        return;
> > +    }
> > +
> >      assert(dev->msix_vector_use_notifier &&
> >             dev->msix_vector_release_notifier);
> >  
> > --
> 
> Can you post a backtrace from gdb?
> 

Sure, w/o the above patch the backtrace with commit 1523ed9e1d looks
like the following:

(gdb) run
Starting program: /usr/src/qemu.git/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -smp 2 -m 2048 -serial file:/tmp/vhost-serial.txt -hda /usr/src/qemu-vhost.git/debian_squeeze_amd64_standard-old.qcow2 -vhost-scsi id=vhost-scsi0,wwpn=naa.600140579ad21088,tpgt=1 -device virtio-scsi-pci,vhost-scsi=vhost-scsi0,event_idx=off
[Thread debugging using libthread_db enabled]
wwpn = "vhost-scsi0" tpgt = "1"
[New Thread 0x7ffff45f8700 (LWP 26508)]
[New Thread 0x7ffff3bf6700 (LWP 26509)]
[New Thread 0x7ffff33f5700 (LWP 26510)]
vhost_scsi_stop
Failed to clear endpoint
qemu-system-x86_64: /usr/src/qemu.git/hw/msix.c:515: msix_unset_vector_notifiers: Assertion `dev->msix_vector_use_notifier && dev->msix_vector_release_notifier' failed.

Program received signal SIGABRT, Aborted.
0x00007ffff5e8b165 in raise () from /lib/libc.so.6
(gdb) bt
#0  0x00007ffff5e8b165 in raise () from /lib/libc.so.6
#1  0x00007ffff5e8df70 in abort () from /lib/libc.so.6
#2  0x00007ffff5e842b1 in __assert_fail () from /lib/libc.so.6
#3  0x00000000004a84a1 in msix_unset_vector_notifiers (dev=0x1463a70) at /usr/src/qemu.git/hw/msix.c:514
#4  0x00000000004d2865 in virtio_pci_set_guest_notifiers (opaque=0x6788, assign=136)
    at /usr/src/qemu.git/hw/virtio-pci.c:703
#5  0x000000000062955f in vhost_dev_stop (hdev=0x126c8a8, vdev=0x1465220) at /usr/src/qemu.git/hw/vhost.c:954
#6  0x0000000000628989 in vhost_scsi_stop (vs=0x126c890, vdev=0x1465220) at /usr/src/qemu.git/hw/vhost-scsi.c:115
#7  0x000000000062f5c9 in virtio_scsi_set_status (vdev=0x1465220, val=<value optimized out>)
    at /usr/src/qemu.git/hw/virtio-scsi.c:631
#8  0x0000000000632082 in virtio_set_status (vdev=0x1465220, val=136 '\210') at /usr/src/qemu.git/hw/virtio.c:507
#9  0x0000000000633410 in virtio_reset (opaque=0x6788) at /usr/src/qemu.git/hw/virtio.c:517
#10 0x00000000004d30a9 in virtio_pci_reset (d=0x1463a70) at /usr/src/qemu.git/hw/virtio-pci.c:280
#11 0x00000000004fc909 in qdev_reset_one (dev=0x6788, opaque=0x6788) at /usr/src/qemu.git/hw/qdev.c:207
#12 0x00000000004fc670 in qdev_walk_children (dev=0x1463a70, devfn=0x4fc8f0 <qdev_reset_one>, 
    busfn=0x4fc510 <qbus_reset_one>, opaque=0x0) at /usr/src/qemu.git/hw/qdev.c:372
#13 0x00000000004ae43d in pci_device_reset (dev=0x6788) at /usr/src/qemu.git/hw/pci.c:163
#14 0x00000000004ae64f in pci_bus_reset (bus=0x1415bd0) at /usr/src/qemu.git/hw/pci.c:206
#15 0x00000000004ae699 in pcibus_reset (qbus=0x6788) at /usr/src/qemu.git/hw/pci.c:213
#16 0x00000000004fc710 in qbus_walk_children (bus=0x1415bd0, devfn=0x4fc8f0 <qdev_reset_one>, busfn=0x6, opaque=0x0)
    at /usr/src/qemu.git/hw/qdev.c:349
#17 0x00000000004fc6a3 in qdev_walk_children (dev=<value optimized out>, devfn=0x4fc8f0 <qdev_reset_one>, 
    busfn=0x4fc510 <qbus_reset_one>, opaque=0x0) at /usr/src/qemu.git/hw/qdev.c:379
#18 0x00000000004fc745 in qbus_walk_children (bus=<value optimized out>, devfn=0x4fc8f0 <qdev_reset_one>, 
    busfn=0x4fc510 <qbus_reset_one>, opaque=0x0) at /usr/src/qemu.git/hw/qdev.c:356
#19 0x00000000004d5822 in qemu_system_reset (report=false) at /usr/src/qemu.git/vl.c:1412
#20 0x00000000004d70bb in main (argc=<value optimized out>, argv=<value optimized out>, envp=<value optimized out>)
    at /usr/src/qemu.git/vl.c:3647
(gdb) 


> Also, is there a git tree and a way to reproduce this without special
> hardware needs?
> 

I'll push this series + branches to demonstrate the issue into an public
tree this afternoon.

Also, the particular backend is a Fusion-IO raw block flash device, but
I'm pretty sure that using a TCM RAMDISK into tcm_vhost would exhibit
the same type of behavior.  (Will double check on that shortly..)

> > 
> > and virtio-scsi is then able to load + detect tcm_vhost LUNs as
> > expected. 
> > 
> > However the random I/O performance with commit 1523ed9e1d46b is off by a
> > couple of orders of magnitude, ~6K IOPs compared to ~60K IOPs on raw
> > block flash using just the previous commit bdd00bdc64ba in Jan's series.
> > 
> > So AFAICT there appears to be a serious performance regression that is
> > easily reproducible with that patch, which is about as far along as I've
> > been able to diagnose yet.
> > 
> > Interestingly enough, virtio-scsi-raw performance does not seem to be
> > effected AFAICT by this regression, and is still able to go ~20K IOPs
> > with the same workload using commit 1523ed9e1d46b.  (Roughly the same as
> > before)
> > 
> > Does anyone have any idea why commit 1523ed9e1d46b would be killing
> > vhost / tcm_vhost performance so terribly, or is there something else
> > that vhost / vhost-scsi should be doing with new code..?
> 
> No good idea yet, will have to look closer.
> 

<nod>, thanks for your help Jan.  ;)

> Maybe you are somehow deassigning (via set_guest_notifiers) before
> assigning. But that would not yet explain performance regressions. Your
> target is exposing MSI-X, isn't it?
> 

I believe that is correct.

--nab

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux