On Sat, Mar 31, 2012 at 12:15:34AM +0200, Jan Kiszka wrote: > On 2012-03-30 23:09, Alex Williamson wrote: > > On Fri, 2012-03-30 at 22:35 +0200, Jan Kiszka wrote: > >> On 2012-03-30 22:31, Jason Baron wrote: > >>> On Fri, Mar 30, 2012 at 10:18:31PM +0200, Jan Kiszka wrote: > >>>>>>> The root cause of the problem is that the 'reset_assigned_device()' code > >>>>>>> first writes a 0 to the command register. Then, when qemu subsequently does > >>>>>>> a kvm_deassign_irq() (called by assign_irq(), in the system_reset path), > >>>>>>> the kernel ends up calling '__msix_mask_irq()', which performs a write to > >>>>>>> the memory mapped msi vector space. Since, we've explicitly told the device > >>>>>>> to disallow mmio access (via the 0 write to the command register), we end > >>>>>>> up with the above 'Unsupported Request'. > >>>>>>> > >>>>>>> The fix here is to first call kvm_deassign_irq(), before doing the reset, > >>>>>> > >>>>>> s/fix/workaround/. This is a kernel bug if userspace can crash the > >>>>>> system like this, no? Let's fix the kernel first and then look at what > >>>>>> needs to be changed here. > >>>>>> > >>>>>> Jan > >>>>>> > >>>>> > >>>>> But don't I need special privalege to run the device assignment bits? > >>>> > >>>> Yes, but even that might be moderated by a management component like > >>>> libvirt. > >>>> > >>>>> For example, this crash is precipitated by a write of '0' to the pci > >>>>> device config register from userspace. Surely, not every is allowed to > >>>>> do that write. So it seems to me, that this patch is in keeping with the > >>>>> current model of how things work. > >>>> > >>>> No user should needlessly be able to crash the host by issuing valid > >>>> commands in a special order. > >>>> > >>>> Jan > >>>> > >>> > >>> Right, but as I see device-assign.c, we are essentially programming the > >>> pci device directly from userspace. Put another way, the kernel could > >>> crash the system if it programmed a pci device in the wrong order. So I > >>> don't see how this is different. But maybe I'm misunderstanding the > >>> model here? > >> > >> The model is that the KVM device assignment subsystem in the kernel (or > >> vfio in the future) + the IOMMU confine what userspace (not the qemu > >> guest) can do with the device and prevent that any harm is caused to the > >> system. There might be practical holes in this model, but this is still > >> what we are striving for. > > > > Jan, I don't think the pci sysfs attributes or qemu device assignment were designed with this in mind. For example, it's up to qemu to assign the device to the iommu domain through kvm, is it not? IMO, if you want to protect against untrusted userspace, you would need to address this in pci sysfs as a first step. For example, add more selinux hooks to control what qemu can do. Another alternative is building a completely new interface like vfio tries to do. > > It's possible to cause this same crash w/o device assignment involved. > > Use setpci to zero the command register, then set smp_affinity on the > > device using MSI-X. It's the right thing to do for qemu reset to return > > device interrupts to a known state, even if it does just happen to be a > > workaround for this problem. Basically the driver/kernel are in control of the command register. If you clobber it from userspace, you might break things. Another easy example would be resetting the device directly instead of through the sysfs attribute. > Looks like the right thing is first of all to catch hardware errors of > an untrusted device and handle them more gracefully than panicing the > whole system. IMO it's ansolutely the right thing to do but the fixes probably can be applied in any order :) Also, ideally we'd pass the errors on to the guest. > I suppose the very same panic can be triggered by writing > to other MMIO bars after fiddling with the command register. And as we > are passing the command register through, this is even guest > triggerable, no? I don't think we pass through command register writes, if we did I think that would be a bug. We do something for PCI-X command register, I didn't look closely so I'm not sure whether what we do is correct. > Can failing PIO access cause such panics as well? I think they can. -- MST -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
