On Tuesday, March 27, 2012 12:49:58 PM Peter Lieven wrote:
> On 27.03.2012 12:40, Vadim Rozenfeld wrote:
> > On Tuesday, March 27, 2012 11:26:29 AM Peter Lieven wrote:
> >> On 27.03.2012 11:23, Vadim Rozenfeld wrote:
> >>> On Tuesday, March 27, 2012 10:56:05 AM Gleb Natapov wrote:
> >>>> On Mon, Mar 26, 2012 at 10:11:43PM +0200, Vadim Rozenfeld wrote:
> >>>>> On Monday, March 26, 2012 08:54:50 PM Peter Lieven wrote:
> >>>>>> On 26.03.2012 20:36, Vadim Rozenfeld wrote:
> >>>>>>> On Monday, March 26, 2012 07:52:49 PM Gleb Natapov wrote:
> >>>>>>>> On Mon, Mar 26, 2012 at 07:46:03PM +0200, Vadim Rozenfeld wrote:
> >>>>>>>>> On Monday, March 26, 2012 07:00:32 PM Peter Lieven wrote:
> >>>>>>>>>> On 22.03.2012 10:38, Vadim Rozenfeld wrote:
> >>>>>>>>>>> On Thursday, March 22, 2012 10:52:42 AM Peter Lieven wrote:
> >>>>>>>>>>>> On 22.03.2012 09:48, Vadim Rozenfeld wrote:
> >>>>>>>>>>>>> On Thursday, March 22, 2012 09:53:45 AM Gleb Natapov wrote:
> >>>>>>>>>>>>>> On Wed, Mar 21, 2012 at 06:31:02PM +0100, Peter Lieven wrote:
> >>>>>>>>>>>>>>> On 21.03.2012 12:10, David Cure wrote:
> >>>>>>>>>>>>>>>> hello,
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Le Tue, Mar 20, 2012 at 02:38:22PM +0200, Gleb Natapov
> >>>
> >>> ecrivait :
> >>>>>>>>>>>>>>>>> Try to add<feature policy='disable' name='hypervisor'/>
> >>>>>>>>>>>>>>>>> to cpu definition in XML and check command line.
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> ok I try this but I can't use<cpu model> to map
the
> >>>>>>>>>>>>>>>> host cpu
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> (my libvirt is 0.9.8) so I use :
> >>>>>>>>>>>>>>>> <cpu match='exact'>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> <model>Opteron_G3</model>
> >>>>>>>>>>>>>>>> <feature policy='disable' name='hypervisor'/>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> </cpu>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> (the physical server use Opteron CPU).
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> The log is here :
> >>>>>>>>>>>>>>>> http://www.roullier.net/Report/report-3.2-vhost-net-1vcpu-
> >>>>>>>>>>>>>>>> cp u.tx t.gz
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And now with only 1 vcpu, the response time is 8.5s,
> >>>>>>>>>>>>>>>> great
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> improvment. We keep this configuration for production : we
> >>>>>>>>>>>>>>>> check the response time when some other users are
> >>>>>>>>>>>>>>>> connected.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> please keep in mind, that setting -hypervisor, disabling
> >>>>>>>>>>>>>>> hpet and only one vcpu
> >>>>>>>>>>>>>>> makes windows use tsc as clocksource. you have to make
> >>>>>>>>>>>>>>> sure, that your vm is not switching between physical
> >>>>>>>>>>>>>>> sockets on your system and that you have constant_tsc
> >>>>>>>>>>>>>>> feature to have a stable tsc between the cores in the same
> >>>>>>>>>>>>>>> socket. its also likely that the vm will crash when live
> >>>>>>>>>>>>>>> migrated.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> All true. I asked to try -hypervisor only to verify where we
> >>>>>>>>>>>>>> loose performance. Since you get good result with it
> >>>>>>>>>>>>>> frequent access to PM timer is probably the reason. I do
> >>>>>>>>>>>>>> not recommend using -hypervisor for production!
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> @gleb: do you know whats the state of in-kernel hyper-v
> >>>>>>>>>>>>>>> timers?
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Vadim is working on it. I'll let him answer.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> It would be nice to have synthetic timers supported. But, at
> >>>>>>>>>>>>> the moment, I'm only researching this feature.
> >>>>>>>>>>>>
> >>>>>>>>>>>> So it will take months at least?
> >>>>>>>>>>>
> >>>>>>>>>>> I would say weeks.
> >>>>>>>>>>
> >>>>>>>>>> Is there a way, we could contribute and help you with this?
> >>>>>>>>>
> >>>>>>>>> Hi Peter,
> >>>>>>>>> You are welcome to add an appropriate handler.
> >>>>>>>>
> >>>>>>>> I think Vadim refers to this HV MSR
> >>>>>>>> http://msdn.microsoft.com/en-us/library/windows/hardware/ff542633%
> >>>>>>>> 28 v=vs .85 %29.aspx
> >>>>>>>
> >>>>>>> This one is pretty simple to support. Please see attachments for
> >>>>>>> more details. I was thinking about synthetic timers
> >>>>>>> http://msdn.microsoft.com/en-
> >>>>>>> us/library/windows/hardware/ff542758(v=vs.85).aspx
> >>>>>>
> >>>>>> is this what microsoft qpc uses as clocksource in hyper-v?
> >>>>>
> >>>>> Yes, it should be enough for Win7 / W2K8R2.
> >>>>
> >>>> To clarify the thing that microsoft qpc uses is what is implemented by
> >>>> the patch Vadim attached to his previous email. But I believe that
> >>>> additional qemu patch is needed for Windows to actually use it.
> >>>
> >>> You are right.
> >>> bits 1 and 9 must be set to on in leaf 0x40000003 and HPET
> >>> should be completely removed from ACPI.
> >>
> >> could you advise how to do this and/or make a patch?
> >
> > Gleb mentioned that it properly handled in upstream,
> > otherwise just comment the entire HPET section in
> > acpi-dsdt.dsl file.
>
> i have upstream bios installed. so -no-hpet should disable hpet completely.
> can you give a hint, what
> "bits 1 and 9 must be set to on in leaf 0x40000003" means?
I mean the following code:
+ if (hyperv_ref_counter_enabled()) {
+ c->eax |= HV_X64_MSR_TIME_REF_COUNT_AVAILABLE;
+ c->eax |= 0x200;
+ }
Please see attached file for more information.
>
> >> the stuff you send yesterday is for qemu, right? would
> >> it be possible to use it in qemu-kvm also?
> >
> > Yes, but don't forget about kvm patch as well.
>
> ok, i will try my best. would you consider your patch a quick hack
> or do you think it would be worth to be uploaded to the upstream
> repository?
It was just a brief attempt from my side, mostly inspirited by our with Gleb
conversation, to see what it worth to turn this option on.
It is not fully tested. It will crash Win8 (as well as the rest of the
currently introduced hyper-v features).
I wouldn't commit this code without comprehensive testing.
Vadim.
>
> peter
>
> >> peter
> >>
> >>>> --
> >>>>
> >>>> Gleb.
diff --git a/target-i386/cpuid.c b/target-i386/cpuid.c
index c2edb64..5c85492 100644
--- a/target-i386/cpuid.c
+++ b/target-i386/cpuid.c
@@ -778,6 +778,9 @@ static int cpu_x86_find_by_name(x86_def_t *x86_cpu_def, const char *cpu_model)
hyperv_enable_relaxed_timing(true);
} else if (!strcmp(featurestr, "hv_vapic")) {
hyperv_enable_vapic_recommended(true);
+ } else if (!strcmp(featurestr, "hv_refcnt")) {
+ hyperv_enable_ref_count(true);
} else {
fprintf(stderr, "feature string `%s' not in format (+feature|-feature|feature=xyz)\n", featurestr);
goto error;
diff --git a/target-i386/hyperv.c b/target-i386/hyperv.c
index f284e99..13a1cb7 100644
--- a/target-i386/hyperv.c
+++ b/target-i386/hyperv.c
@@ -15,6 +15,7 @@
static bool hyperv_vapic;
static bool hyperv_relaxed_timing;
static int hyperv_spinlock_attempts = HYPERV_SPINLOCK_NEVER_RETRY;
+static bool hyperv_ref_count;
void hyperv_enable_vapic_recommended(bool val)
{
@@ -34,9 +35,17 @@ void hyperv_set_spinlock_retries(int val)
}
}
+void hyperv_enable_ref_count(bool val)
+{
+ hyperv_ref_count = val;
+}
+
bool hyperv_enabled(void)
{
- return hyperv_hypercall_available() || hyperv_relaxed_timing_enabled();
+ return hyperv_hypercall_available() ||
+ hyperv_relaxed_timing_enabled() ||
+ hyperv_ref_counter_enabled();
}
bool hyperv_hypercall_available(void)
@@ -62,3 +71,9 @@ int hyperv_get_spinlock_retries(void)
{
return hyperv_spinlock_attempts;
}
+
+bool hyperv_ref_counter_enabled(void)
+{
+ return hyperv_ref_count;
+}
diff --git a/target-i386/hyperv.h b/target-i386/hyperv.h
index bacb1d4..a65aa5f 100644
--- a/target-i386/hyperv.h
+++ b/target-i386/hyperv.h
@@ -30,10 +30,12 @@
void hyperv_enable_vapic_recommended(bool val);
void hyperv_enable_relaxed_timing(bool val);
void hyperv_set_spinlock_retries(int val);
+void hyperv_enable_ref_count(bool val);
#else
static inline void hyperv_enable_vapic_recommended(bool val) { }
static inline void hyperv_enable_relaxed_timing(bool val) { }
static inline void hyperv_set_spinlock_retries(int val) { }
+static inline void hyperv_enable_ref_count(bool val) {}
#endif
bool hyperv_enabled(void);
@@ -41,5 +43,5 @@ bool hyperv_hypercall_available(void);
bool hyperv_vapic_recommended(void);
bool hyperv_relaxed_timing_enabled(void);
int hyperv_get_spinlock_retries(void);
-
+bool hyperv_ref_counter_enabled(void);
#endif /* QEMU_HW_HYPERV_H */
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 9a73207..31ca04a 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -414,7 +414,12 @@ int kvm_arch_init_vcpu(CPUState *env)
c->eax |= HV_X64_MSR_HYPERCALL_AVAILABLE;
c->eax |= HV_X64_MSR_APIC_ACCESS_AVAILABLE;
}
-
+ if (hyperv_ref_counter_enabled()) {
+ c->eax |= HV_X64_MSR_TIME_REF_COUNT_AVAILABLE;
+ c->eax |= 0x200;
+ }
c = &cpuid_data.entries[cpuid_i++];
memset(c, 0, sizeof(*c));
c->function = HYPERV_CPUID_ENLIGHTMENT_INFO;
