[PATCH] kvm tools: Simplify msi message handling

[Sasha Levin <levinsasha928@xxxxxxxxx>]

This patch simplifies passing around msi messages by using
'struct kvm_irq_routing_msi' for storing of msi messages instead
of passing all msi parameters around.

Signed-off-by: Sasha Levin <levinsasha928@xxxxxxxxx>
---
 tools/kvm/hw/pci-shmem.c    |    5 +----
 tools/kvm/include/kvm/irq.h |    3 ++-
 tools/kvm/include/kvm/pci.h |    6 ++----
 tools/kvm/irq.c             |    6 ++----
 tools/kvm/virtio/pci.c      |   10 ++--------
 5 files changed, 9 insertions(+), 21 deletions(-)

diff --git a/tools/kvm/hw/pci-shmem.c b/tools/kvm/hw/pci-shmem.c
index 2907a66..780a377 100644
--- a/tools/kvm/hw/pci-shmem.c
+++ b/tools/kvm/hw/pci-shmem.c
@@ -124,10 +124,7 @@ int pci_shmem__get_local_irqfd(struct kvm *kvm)
 			return fd;
 
 		if (pci_shmem_pci_device.msix.ctrl & PCI_MSIX_FLAGS_ENABLE) {
-			gsi = irq__add_msix_route(kvm,
-				  msix_table[0].low,
-				  msix_table[0].high,
-				  msix_table[0].data);
+			gsi = irq__add_msix_route(kvm, &msix_table[0].msg);
 		} else {
 			gsi = pci_shmem_pci_device.irq_line;
 		}
diff --git a/tools/kvm/include/kvm/irq.h b/tools/kvm/include/kvm/irq.h
index 401bee9..3df795d 100644
--- a/tools/kvm/include/kvm/irq.h
+++ b/tools/kvm/include/kvm/irq.h
@@ -4,6 +4,7 @@
 #include <linux/types.h>
 #include <linux/rbtree.h>
 #include <linux/list.h>
+#include <linux/kvm.h>
 
 struct kvm;
 
@@ -24,6 +25,6 @@ int irq__register_device(u32 dev, u8 *num, u8 *pin, u8 *line);
 struct rb_node *irq__get_pci_tree(void);
 
 void irq__init(struct kvm *kvm);
-int irq__add_msix_route(struct kvm *kvm, u32 low, u32 high, u32 data);
+int irq__add_msix_route(struct kvm *kvm, struct kvm_irq_routing_msi *msg);
 
 #endif
diff --git a/tools/kvm/include/kvm/pci.h b/tools/kvm/include/kvm/pci.h
index 5ee8005..61753a0 100644
--- a/tools/kvm/include/kvm/pci.h
+++ b/tools/kvm/include/kvm/pci.h
@@ -2,7 +2,7 @@
 #define KVM__PCI_H
 
 #include <linux/types.h>
-
+#include <linux/kvm.h>
 #include <linux/pci_regs.h>
 
 /*
@@ -26,9 +26,7 @@ struct pci_config_address {
 };
 
 struct msix_table {
-	u32 low;
-	u32 high;
-	u32 data;
+	struct kvm_irq_routing_msi msg;
 	u32 ctrl;
 };
 
diff --git a/tools/kvm/irq.c b/tools/kvm/irq.c
index e35bf18..f1002d8 100644
--- a/tools/kvm/irq.c
+++ b/tools/kvm/irq.c
@@ -167,7 +167,7 @@ void irq__init(struct kvm *kvm)
 		die("Failed setting GSI routes");
 }
 
-int irq__add_msix_route(struct kvm *kvm, u32 low, u32 high, u32 data)
+int irq__add_msix_route(struct kvm *kvm, struct kvm_irq_routing_msi *msg)
 {
 	int r;
 
@@ -175,9 +175,7 @@ int irq__add_msix_route(struct kvm *kvm, u32 low, u32 high, u32 data)
 		(struct kvm_irq_routing_entry) {
 			.gsi = gsi,
 			.type = KVM_IRQ_ROUTING_MSI,
-			.u.msi.address_lo = low,
-			.u.msi.address_hi = high,
-			.u.msi.data = data,
+			.u.msi = *msg,
 		};
 
 	r = ioctl(kvm->vm_fd, KVM_SET_GSI_ROUTING, irq_routing);
diff --git a/tools/kvm/virtio/pci.c b/tools/kvm/virtio/pci.c
index f01851b..73d55a9 100644
--- a/tools/kvm/virtio/pci.c
+++ b/tools/kvm/virtio/pci.c
@@ -126,20 +126,14 @@ static bool virtio_pci__specific_io_out(struct kvm *kvm, struct virtio_pci *vpci
 		case VIRTIO_MSI_CONFIG_VECTOR:
 			vec = vpci->config_vector = ioport__read16(data);
 
-			gsi = irq__add_msix_route(kvm,
-						  vpci->msix_table[vec].low,
-						  vpci->msix_table[vec].high,
-						  vpci->msix_table[vec].data);
+			gsi = irq__add_msix_route(kvm, &vpci->msix_table[vec].msg);
 
 			vpci->config_gsi = gsi;
 			break;
 		case VIRTIO_MSI_QUEUE_VECTOR: {
 			vec = vpci->vq_vector[vpci->queue_selector] = ioport__read16(data);
 
-			gsi = irq__add_msix_route(kvm,
-						  vpci->msix_table[vec].low,
-						  vpci->msix_table[vec].high,
-						  vpci->msix_table[vec].data);
+			gsi = irq__add_msix_route(kvm, &vpci->msix_table[vec].msg);
 			vpci->gsis[vpci->queue_selector] = gsi;
 			break;
 		}
-- 
1.7.7

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html