---
.gitignore | 1 -
Makefile | 2 -
Makefile.target | 1 -
blockdev.c | 13 -
blockdev.h | 2 -
hw/extboot.c | 123 --------
hw/pc.c | 22 --
hw/pc.h | 4 -
pc-bios/optionrom/Makefile | 2 +-
pc-bios/optionrom/extboot.S | 691 -------------------------------------------
qemu-config.c | 4 -
qemu-options.hx | 4 +-
12 files changed, 2 insertions(+), 867 deletions(-)
delete mode 100644 hw/extboot.c
delete mode 100644 pc-bios/optionrom/extboot.S
diff --git a/.gitignore b/.gitignore
index 625f28e..ea2bd8a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -66,7 +66,6 @@ pc-bios/vgabios-pq/status
pc-bios/optionrom/linuxboot.bin
pc-bios/optionrom/multiboot.bin
pc-bios/optionrom/multiboot.raw
-pc-bios/optionrom/extboot.bin
pc-bios/optionrom/vapic.bin
.stgit-*
cscope.*
diff --git a/Makefile b/Makefile
index 57a033d..fd7f6d7 100644
--- a/Makefile
+++ b/Makefile
@@ -249,7 +249,6 @@ mpc8544ds.dtb \
multiboot.bin linuxboot.bin \
s390-zipl.rom \
spapr-rtas.bin slof.bin
-BLOBS += extboot.bin
BLOBS += vapic.bin
else
BLOBS=
@@ -402,7 +401,6 @@ tarbin:
$(datadir)/pxe-pcnet.rom \
$(datadir)/pxe-rtl8139.rom \
$(datadir)/pxe-virtio.rom \
- $(datadir)/extboot.bin \
$(docdir)/qemu-doc.html \
$(docdir)/qemu-tech.html \
$(mandir)/man1/qemu.1 \
diff --git a/Makefile.target b/Makefile.target
index 621e4f2..319e696 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -230,7 +230,6 @@ obj-i386-y += mc146818rtc.o i8259.o pc.o
obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmport.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
-obj-i386-y += extboot.o
obj-i386-y += debugcon.o multiboot.o
obj-i386-y += pc_piix.o
obj-i386-$(CONFIG_KVM) += kvmclock.o
diff --git a/blockdev.c b/blockdev.c
index 3289e49..2602591 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -17,8 +17,6 @@
#include "hw/qdev.h"
#include "block_int.h"
-DriveInfo *extboot_drive = NULL;
-
static QTAILQ_HEAD(drivelist, DriveInfo) drives = QTAILQ_HEAD_INITIALIZER(drives);
static const char *const if_name[IF_COUNT] = {
@@ -238,7 +236,6 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
int on_read_error, on_write_error;
const char *devaddr;
DriveInfo *dinfo;
- int is_extboot = 0;
int snapshot = 0;
int ret;
@@ -357,12 +354,6 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
}
}
- is_extboot = qemu_opt_get_bool(opts, "boot", 0);
- if (is_extboot&& extboot_drive) {
- fprintf(stderr, "qemu: two bootable drives specified\n");
- return NULL;
- }
-
on_write_error = BLOCK_ERR_STOP_ENOSPC;
if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
if (type != IF_IDE&& type != IF_SCSI&& type != IF_VIRTIO&& type != IF_NONE) {
@@ -468,10 +459,6 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
strncpy(dinfo->serial, serial, sizeof(dinfo->serial) - 1);
QTAILQ_INSERT_TAIL(&drives, dinfo, next);
- if (is_extboot) {
- extboot_drive = dinfo;
- }
-
bdrv_set_on_error(dinfo->bdrv, on_read_error, on_write_error);
switch(type) {
diff --git a/blockdev.h b/blockdev.h
index 0a5144c..3587786 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -66,6 +66,4 @@ int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data);
int do_snapshot_blkdev(Monitor *mon, const QDict *qdict, QObject **ret_data);
int do_block_resize(Monitor *mon, const QDict *qdict, QObject **ret_data);
-extern DriveInfo *extboot_drive;
-
#endif
diff --git a/hw/extboot.c b/hw/extboot.c
deleted file mode 100644
index d517834..0000000
--- a/hw/extboot.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Extended boot option ROM support.
- *
- * Copyright IBM, Corp. 2007
- *
- * Authors:
- * Anthony Liguori<aliguori@xxxxxxxxxx>
- *
- * This work is licensed under the terms of the GNU GPL, version 2. See
- * the COPYING file in the top-level directory.
- *
- */
-
-#include "hw.h"
-#include "pc.h"
-#include "isa.h"
-#include "block.h"
-
-/* Extended Boot ROM suport */
-
-union extboot_cmd
-{
- uint16_t type;
- struct {
- uint16_t type;
- uint16_t cylinders;
- uint16_t heads;
- uint16_t sectors;
- uint64_t nb_sectors;
- } query_geometry;
- struct {
- uint16_t type;
- uint16_t nb_sectors;
- uint16_t segment;
- uint16_t offset;
- uint64_t sector;
- } xfer;
-};
-
-static void get_translated_chs(BlockDriverState *bs, int *c, int *h, int *s)
-{
- bdrv_get_geometry_hint(bs, c, h, s);
-
- if (*c<= 1024) {
- *c>>= 0;
- *h<<= 0;
- } else if (*c<= 2048) {
- *c>>= 1;
- *h<<= 1;
- } else if (*c<= 4096) {
- *c>>= 2;
- *h<<= 2;
- } else if (*c<= 8192) {
- *c>>= 3;
- *h<<= 3;
- } else {
- *c>>= 4;
- *h<<= 4;
- }
-
- /* what is the correct algorithm for this?? */
- if (*h == 256) {
- *h = 255;
- *c = *c + 1;
- }
-}
-
-static void extboot_write_cmd(void *opaque, uint32_t addr, uint32_t value)
-{
- union extboot_cmd cmd;
- BlockDriverState *bs = opaque;
- int cylinders, heads, sectors, err;
- uint64_t nb_sectors;
- target_phys_addr_t pa = 0;
- int blen = 0;
- void *buf = NULL;
-
- cpu_physical_memory_read((value& 0xFFFF)<< 4, (uint8_t *)&cmd,
- sizeof(cmd));
-
- if (cmd.type == 0x01 || cmd.type == 0x02) {
- pa = cmd.xfer.segment * 16 + cmd.xfer.offset;
- blen = cmd.xfer.nb_sectors * 512;
- buf = qemu_memalign(512, blen);
- }
-
- switch (cmd.type) {
- case 0x00:
- get_translated_chs(bs,&cylinders,&heads,§ors);
- bdrv_get_geometry(bs,&nb_sectors);
- cmd.query_geometry.cylinders = cylinders;
- cmd.query_geometry.heads = heads;
- cmd.query_geometry.sectors = sectors;
- cmd.query_geometry.nb_sectors = nb_sectors;
- break;
- case 0x01:
- err = bdrv_read(bs, cmd.xfer.sector, buf, cmd.xfer.nb_sectors);
- if (err)
- printf("Read failed\n");
-
- cpu_physical_memory_write(pa, buf, blen);
-
- break;
- case 0x02:
- cpu_physical_memory_read(pa, buf, blen);
-
- err = bdrv_write(bs, cmd.xfer.sector, buf, cmd.xfer.nb_sectors);
- if (err)
- printf("Write failed\n");
-
- break;
- }
-
- cpu_physical_memory_write((value& 0xFFFF)<< 4, (uint8_t *)&cmd,
- sizeof(cmd));
- if (buf)
- free(buf);
-}
-
-void extboot_init(BlockDriverState *bs)
-{
- register_ioport_write(0x405, 1, 2, extboot_write_cmd, bs);
-}
diff --git a/hw/pc.c b/hw/pc.c
index da98386..23a5e5c 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -59,7 +59,6 @@
#endif
#define BIOS_FILENAME "bios.bin"
-#define EXTBOOT_FILENAME "extboot.bin"
#define VAPIC_FILENAME "vapic.bin"
#define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
@@ -1050,15 +1049,6 @@ void pc_memory_init(MemoryRegion *system_memory,
(uint32_t)(-bios_size),
bios);
- if (extboot_drive) {
- option_rom[nb_option_roms].name = g_strdup(EXTBOOT_FILENAME);
- option_rom[nb_option_roms].bootindex = 0;
- nb_option_roms++;
- }
- option_rom[nb_option_roms].name = g_strdup(VAPIC_FILENAME);
- option_rom[nb_option_roms].bootindex = -1;
- nb_option_roms++;
-
fw_cfg = bochs_bios_init();
rom_set_fw(fw_cfg);
@@ -1206,16 +1196,4 @@ void pc_pci_device_init(PCIBus *pci_bus)
for (bus = 0; bus<= max_bus; bus++) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
}
-
- if (extboot_drive) {
- DriveInfo *info = extboot_drive;
- int cyls, heads, secs;
-
- if (info->type != IF_IDE&& info->type != IF_VIRTIO) {
- bdrv_guess_geometry(info->bdrv,&cyls,&heads,&secs);
- bdrv_set_geometry_hint(info->bdrv, cyls, heads, secs);
- }
-
- extboot_init(info->bdrv);
- }
}
diff --git a/hw/pc.h b/hw/pc.h
index dc219a2..2d345ca 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -252,10 +252,6 @@ static inline bool isa_ne2000_init(int base, int irq, NICInfo *nd)
return true;
}
-/* extboot.c */
-
-void extboot_init(BlockDriverState *bs);
-
/* e820 types */
#define E820_RAM 1
#define E820_RESERVED 2
diff --git a/pc-bios/optionrom/Makefile b/pc-bios/optionrom/Makefile
index da1a8b8..5c691da 100644
--- a/pc-bios/optionrom/Makefile
+++ b/pc-bios/optionrom/Makefile
@@ -16,7 +16,7 @@ QEMU_CFLAGS = $(CFLAGS)
build-all: multiboot.bin linuxboot.bin
-build-all: extboot.bin vapic.bin
+build-all: vapic.bin
%.img: %.o
$(call quiet-command,$(LD) -Ttext 0 -e _start -s -o $@ $<," Building $(TARGET_DIR)$@")
diff --git a/pc-bios/optionrom/extboot.S b/pc-bios/optionrom/extboot.S
deleted file mode 100644
index db6c2b6..0000000
--- a/pc-bios/optionrom/extboot.S
+++ /dev/null
@@ -1,691 +0,0 @@
-/*
- * Extended Boot Option ROM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Copyright IBM Corporation, 2007
- * Authors: Anthony Liguori<aliguori@xxxxxxxxxx>
- */
-
-#define OLD_INT19 (0x80 * 4) /* re-use INT 0x80 BASIC vector */
-#define OLD_INT13 (0x81 * 4) /* re-use INT 0x81 BASIC vector */
-
-.code16
-.text
- .global _start
-_start:
- .short 0xaa55
- .byte (_end - _start) / 512
- push %eax
- push %ds
-
- /* setup ds so we can access the IVT */
- xor %ax, %ax
- mov %ax, %ds
-
- /* there is one more bootable HD */
- incb 0x0475
-
- /* save old int 19 */
- mov (0x19*4), %eax
- mov %eax, (OLD_INT19)
-
- /* install out int 19 handler */
- movw $int19_handler, (0x19*4)
- mov %cs, (0x19*4+2)
-
- pop %ds
- pop %eax
- lret
-
-int19_handler:
- push %eax /* reserve space for lret */
- push %eax
- push %bx
- push %cx
- push %dx
- push %ds
-
- /* setup ds to access IVT */
- xor %ax, %ax
- mov %ax, %ds
-
- /* save old int 13 to int 2c */
- mov (0x13*4), %eax
- mov %eax, (OLD_INT13)
-
- /* install our int 13 handler */
- movw $int13_handler, (0x13*4)
- mov %cs, (0x13*4+2)
-
- /* restore previous int $0x19 handler */
- mov (OLD_INT19),%eax
- mov %eax,(0x19*4)
-
- /* write old handler as return address onto stack */
- push %bp
- mov %sp, %bp
- mov %eax, 14(%bp)
- pop %bp
-
- pop %ds
- pop %dx
- pop %cx
- pop %bx
- pop %eax
- lret
-
-#define FLAGS_CF 0x01
-
-/* The two macro below clear/set the carry flag to indicate the status
- * of the interrupt execution. It is not enough to issue a clc/stc instruction,
- * since the value of the flags register will be overwritten by whatever is
- * in the stack frame
- */
-.macro clc_stack
- push %bp
- mov %sp, %bp
- /* 8 = 2 (bp, just pushed) + 2 (ip) + 3 (real mode interrupt frame) */
- and $(~FLAGS_CF), 8(%bp)
- pop %bp
-.endm
-
-.macro stc_stack
- push %bp
- /* 8 = 2 (bp, just pushed) + 2 (ip) + 3 (real mode interrupt frame) */
- or $(FLAGS_CF), 8(%bp)
- pop %bp
-.endm
-
-/* we clobber %bx */
-.macro alloca size
- push %ds
- push %bp
- mov %sp, %bp /* remember the current stack position */
-
- mov %ss, %bx
- mov %bx, %ds
-
- sub \size, %sp
- and $(~0x0F), %sp
- mov %sp, %bx
-
- push %bp
- mov 0(%bp), %bp
-.endm
-
-/* we clobber %bp */
-.macro allocbpa size
- mov %sp, %bp /* remember the current stack position */
- sub \size, %sp
- and $(~0x0F), %sp
- push %bp
- mov %sp, %bp
- add $2, %bp
-.endm
-
-.macro freea
- pop %sp
- add $2, %sp
- pop %ds
-.endm
-
-.macro freebpa
- pop %sp
-.endm
-
-.macro dump reg
- push %ax
- push %dx
-
- mov \reg, %ax
- mov $0x406, %dx
- outw %ax, %dx
-
- pop %dx
- pop %ax
-.endm
-
-.macro callout value
- push %bp
- push %bx
- mov %sp, %bp
- alloca $16
- push %ax
- push %dx
-
- mov %ax, 0(%bx) /* ax */
- mov 0(%bp), %ax /* bx */
- mov %ax, 2(%bx)
- mov %cx, 4(%bx) /* cx */
- mov %dx, 6(%bx) /* dx */
- mov %si, 8(%bx) /* si */
- mov %ds, 10(%bx) /* ds */
- mov %es, 12(%bx) /* ds */
- movw \value, 14(%bx) /* value */
-
- mov %bx, %ax
- shr $4, %ax
- mov %ds, %dx
- add %dx, %ax
-
- mov $0x407, %dx
- outw %ax, %dx
-
- pop %dx
- pop %ax
- freea
- pop %bx
- pop %bp
-.endm
-
-send_command:
- push %bp
- mov %sp, %bp
- push %ax
- push %bx
- push %dx
-
- mov 4(%bp), %ax
- shr $4, %ax
- and $0x0FFF, %ax
- mov %ss, %bx
- add %bx, %ax
-
- mov $0x405, %dx
- outw %ax, %dx
-
- pop %dx
- pop %bx
- pop %ax
- pop %bp
-
- push %ax
- mov 2(%bx), %ax
- pop %ax
-
- ret
-
-add32: /* lo, hi, lo, hi */
- push %bp
- mov %sp, %bp
-
- movw 4(%bp), %cx /* hi */
- movw 6(%bp), %dx /* lo */
-
- add 10(%bp), %dx
- jnc 1f
- add $1, %cx
-1: add 8(%bp), %cx
-
- pop %bp
- ret
-
-mul32: /* lo, hi, lo, hi */
- /* 10(%bp), 8(%bp), 6(%bp), 4(%bp) */
- push %bp
- mov %sp, %bp
- push %ax
- push %bx
-
- xor %cx, %cx
- xor %dx, %dx
-
- /* for (i = 0; i< 16;) */
- xor %bx, %bx
-0:
- cmp $16, %bx
- jge 2f
-
- mov 6(%bp), %ax
- and $1, %ax
- cmp $1, %ax
- jne 1f
- push 10(%bp)
- push 8(%bp)
- push %dx
- push %cx
- call add32
- add $8, %sp
-1:
- shlw $1, 8(%bp)
- movw 10(%bp), %ax
- and $0x8000, %ax
- cmp $0x8000, %ax
- jne 1f
- orw $1, 8(%bp)
-1:
- shlw $1, 10(%bp)
- shrw $1, 6(%bp)
-
- /* i++) { */
- add $1, %bx
- jmp 0b
-
-2:
- pop %bx
- pop %ax
- pop %bp
- ret
-
-disk_reset:
- movb $0, %ah
- clc_stack
- ret
-
-/* this really should be a function, not a macro but i'm lazy */
-.macro read_write_disk_sectors cmd
- push %ax
- push %bx
- push %cx
- push %dx
- push %si
-
- push %bp
- sub $10, %sp
- mov %sp, %bp
-
- /* save nb_sectors */
- mov %al, 6(%bp)
- movb $0, 7(%bp)
-
- /* save buffer */
- mov %bx, 8(%bp)
-
- /* cylinders */
- xor %ax, %ax
- mov %cl, %al
- shl $2, %ax
- and $0x300, %ax
- mov %ch, %al
- mov %ax, 0(%bp)
-
- /* heads */
- xor %ax, %ax
- mov %dh, %al
- mov %ax, 2(%bp)
-
- /* sectors - 1 */
- xor %ax, %ax
- mov %cl, %al
- and $0x3F, %al
- sub $1, %ax
- mov %ax, 4(%bp)
-
- alloca $16
-
- movw $0, 0(%bx) /* read c,h,s */
- push %bx
- call send_command
- add $2, %sp
-
- mov 6(%bx), %ax /* total_sectors */
- mov 2(%bp), %si /* *= heads */
- mul %si
- add 4(%bp), %ax /* += sectors - 1 */
-
- push 4(%bx) /* total_heads */
- push $0
- push 6(%bx) /* total_sectors */
- push $0
- call mul32
- add $8, %sp
-
- push 0(%bp) /* cylinders */
- push $0
- push %dx
- push %cx
- call mul32
- add $8, %sp
-
- add %ax, %dx
- jnc 1f
- add $1, %cx
-1:
- freea
-
- alloca $16
-
- movw \cmd, 0(%bx) /* read */
- movw 6(%bp), %ax /* nb_sectors */
- movw %ax, 2(%bx)
- movw %es, 4(%bx) /* segment */
- movw 8(%bp), %ax /* offset */
- mov %ax, 6(%bx)
- movw %dx, 8(%bx) /* sector */
- movw %cx, 10(%bx)
- movw $0, 12(%bx)
- movw $0, 14(%bx)
-
- push %bx
- call send_command
- add $2, %sp
-
- freea
-
- add $10, %sp
- pop %bp
-
- pop %si
- pop %dx
- pop %cx
- pop %bx
- pop %ax
-
- mov $0, %ah
- clc_stack
- ret
-.endm
-
-read_disk_sectors:
- read_write_disk_sectors $0x01
-
-write_disk_sectors:
- read_write_disk_sectors $0x02
-
-read_disk_drive_parameters:
- push %bx
-
- /* allocate memory for packet, pointer gets returned in bx */
- alloca $16
-
- /* issue command */
- movw $0, 0(%bx) /* cmd = 0, read c,h,s */
- push %bx
- call send_command
- add $2, %sp
-
- /* normalize sector value */
- movb 6(%bx), %cl
- andb $0x3F, %cl
- movb %cl, 6(%bx)
-
- /* normalize cylinders */
- subw $2, 2(%bx)
-
- /* normalize heads */
- subw $1, 4(%bx)
-
- /* return code */
- mov $0, %ah
-
- /* cylinders */
- movb 2(%bx), %ch
- movb 3(%bx), %cl
- shlb $6, %cl
- andb $0xC0, %cl
-
- /* sectors */
- orb 6(%bx), %cl
-
- /* heads */
- movb 4(%bx), %dh
-
- /* drives */
- movb $1, %dl
-
- /* status */
- mov $0, %ah
-
- freea
-
- pop %bx
-
- /* do this last since it's the most sensitive */
- clc_stack
- ret
-
-alternate_disk_reset:
- movb $0, %ah
- clc_stack
- ret
-
-read_disk_drive_size:
- push %bx
- alloca $16
-
- movw $0, 0(%bx) /* cmd = 0, read c,h,s */
- push %bx
- call send_command
- add $2, %sp
-
- /* cylinders - 1 to cx:dx */
- mov 2(%bx), %dx
- xor %cx, %cx
- sub $1, %dx
-
- /* heads */
- push 4(%bx)
- push $0
- push %dx
- push %cx
- call mul32
- add $8, %sp
-
- /* sectors */
- push 6(%bx)
- push $0
- push %dx
- push %cx
- call mul32
- add $8, %sp
-
- /* status */
- mov $3, %ah
-
- freea
- pop %bx
-
- clc_stack
- ret
-
-check_if_extensions_present:
- mov $0x30, %ah
- mov $0xAA55, %bx
- mov $0x07, %cx
- clc_stack
- ret
-
-.macro extended_read_write_sectors cmd
- cmpb $10, 0(%si)
- jg 1f
- mov $1, %ah
- stc_stack
- ret
-1:
- push %ax
- push %bp
- allocbpa $16
-
- movw \cmd, 0(%bp) /* read */
- movw 2(%si), %ax /* nb_sectors */
- movw %ax, 2(%bp)
- movw 4(%si), %ax /* offset */
- movw %ax, 6(%bp)
- movw 6(%si), %ax /* segment */
- movw %ax, 4(%bp)
- movw 8(%si), %ax /* block */
- movw %ax, 8(%bp)
- movw 10(%si), %ax
- movw %ax, 10(%bp)
- movw 12(%si), %ax
- movw %ax, 12(%bp)
- movw 14(%si), %ax
- movw %ax, 14(%bp)
-
- push %bp
- call send_command
- add $2, %sp
-
- freebpa
- pop %bp
- pop %ax
-
- mov $0, %ah
- clc_stack
- ret
-.endm
-
-extended_read_sectors:
- extended_read_write_sectors $0x01
-
-extended_write_sectors:
- extended_read_write_sectors $0x02
-
-get_extended_drive_parameters:
- push %ax
- push %bp
- push %cx
- push %dx
-
- allocbpa $16
-
- movw $0, 0(%bp) /* read c,h,s */
- push %bp
- call send_command
- add $2, %sp
-
- /* write size */
- movw $26, 0(%si)
-
- /* set flags to 2 */
- movw $2, 2(%si)
-
- /* cylinders */
- mov 2(%bp), %ax
- mov %ax, 4(%si)
- xor %ax, %ax
- mov %ax, 6(%si)
-
- /* heads */
- mov 4(%bp), %ax
- mov %ax, 8(%si)
- xor %ax, %ax
- mov %ax, 10(%si)
-
- /* sectors */
- mov 6(%bp), %ax
- mov %ax, 12(%si)
- xor %ax, %ax
- mov %ax, 14(%si)
-
- /* set total number of sectors */
- mov 8(%bp), %ax
- mov %ax, 16(%si)
- mov 10(%bp), %ax
- mov %ax, 18(%si)
- mov 12(%bp), %ax
- mov %ax, 20(%si)
- mov 14(%bp), %ax
- mov %ax, 22(%si)
-
- /* number of bytes per sector */
- movw $512, 24(%si)
-
- freebpa
-
- pop %dx
- pop %cx
- pop %bp
- pop %ax
-
- mov $0, %ah
- clc_stack
- ret
-
-terminate_disk_emulation:
- mov $1, %ah
- stc_stack
- ret
-
-int13_handler:
- cmp $0x80, %dl
- je 1f
-
- /* write old handler as return address onto stack */
- push %eax
- push %eax
- push %ds
- push %bp
- mov %sp, %bp
- xor %ax, %ax
- mov %ax, %ds
- mov (OLD_INT13), %eax
- mov %eax, 8(%bp)
- pop %bp
- pop %ds
- pop %eax
- lret
-1:
- cmp $0x0, %ah
- jne 1f
- call disk_reset
- iret
-1:
- cmp $0x2, %ah
- jne 1f
- call read_disk_sectors
- iret
-1:
- cmp $0x8, %ah
- jne 1f
- call read_disk_drive_parameters
- iret
-1:
- cmp $0x15, %ah
- jne 1f
- call read_disk_drive_size
- iret
-1:
- cmp $0x41, %ah
- jne 1f
- call check_if_extensions_present
- iret
-1:
- cmp $0x42, %ah
- jne 1f
- call extended_read_sectors
- iret
-1:
- cmp $0x48, %ah
- jne 1f
- call get_extended_drive_parameters
- iret
-1:
- cmp $0x4b, %ah
- jne 1f
- call terminate_disk_emulation
- iret
-1:
- cmp $0x0d, %ah
- jne 1f
- call alternate_disk_reset
- iret
-1:
- cmp $0x03, %ah
- jne 1f
- call write_disk_sectors
- iret
-1:
- cmp $0x43, %ah
- jne 1f
- call extended_write_sectors
- iret
-1:
- int $0x18 /* boot failed */
- iret
-
-.align 512, 0
-_end:
diff --git a/qemu-config.c b/qemu-config.c
index acab438..7a7854f 100644
--- a/qemu-config.c
+++ b/qemu-config.c
@@ -85,10 +85,6 @@ static QemuOptsList qemu_drive_opts = {
.name = "readonly",
.type = QEMU_OPT_BOOL,
.help = "open drive file as read-only",
- },{
- .name = "boot",
- .type = QEMU_OPT_BOOL,
- .help = "make this a boot drive",
},
{ /* end of list */ }
},
diff --git a/qemu-options.hx b/qemu-options.hx
index df95cb2..cf79071 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -135,7 +135,7 @@ DEF("drive", HAS_ARG, QEMU_OPTION_drive,
" [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
" [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n"
" [,serial=s][,addr=A][,id=name][,aio=threads|native]\n"
- " [,readonly=on|off][,boot=on|off]\n"
+ " [,readonly=on|off]\n"
" use 'file' as a drive image\n", QEMU_ARCH_ALL)
STEXI
@item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
@@ -183,8 +183,6 @@ host disk is full; report the error to the guest otherwise).
The default setting is @option{werror=enospc} and @option{rerror=report}.
@item readonly
Open drive @option{file} as read-only. Guest write attempts will fail.
-@item boot=@var{boot}
-@var{boot} is "on" or "off" and allows for booting from non-traditional interfaces, such as virtio.
@end table
By default, writethrough caching is used for all block device. This means that
