Re: [libvirt] Qemu/KVM is 3x slower under libvirt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 27, 2011 at 08:10:21PM +0200, Reeted wrote:
> I repost this, this time by also including the libvirt mailing list.
> 
> Info on my libvirt: it's the version in Ubuntu 11.04 Natty which is
> 0.8.8-1ubuntu6.5 . I didn't recompile this one, while Kernel and
> qemu-kvm are vanilla and compiled by hand as described below.
> 
> My original message follows:
> 
> This is really strange.
> 
> I just installed a new host with kernel 3.0.3 and Qemu-KVM 0.14.1
> compiled by me.
> 
> I have created the first VM.
> This is on LVM, virtio etc... if I run it directly from bash
> console, it boots in 8 seconds (it's a bare ubuntu with no
> graphics), while if I boot it under virsh (libvirt) it boots in
> 20-22 seconds. This is the time from after Grub to the login prompt,
> or from after Grub to the ssh-server up.
>
> I was almost able to replicate the whole libvirt command line on the
> bash console, and it still goes almost 3x faster when launched from
> bash than with virsh start vmname. The part I wasn't able to
> replicate is the -netdev part because I still haven't understood the
> semantics of it.

-netdev is just an alternative way of setting up networking that
avoids QEMU's nasty VLAN concept. Using -netdev allows QEMU to
use more efficient codepaths for networking, which should improve
the network performance.

> This is my bash commandline:
> 
> /opt/qemu-kvm-0.14.1/bin/qemu-system-x86_64 -M pc-0.14 -enable-kvm
> -m 2002 -smp 2,sockets=2,cores=1,threads=1 -name vmname1-1 -uuid
> ee75e28a-3bf3-78d9-3cba-65aa63973380 -nodefconfig -nodefaults
> -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/vmname1-1.monitor,server,nowait
> -mon chardev=charmonitor,id=monitor,mode=readline -rtc base=utc
> -boot order=dc,menu=on -drive file=/dev/mapper/vgPtpVM-lvVM_Vmname1_d1,if=none,id=drive-virtio-disk0,boot=on,format=raw,cache=none,aio=native
> -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0
> -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw,cache=none,aio=native
> -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0
> -net nic,model=virtio -net tap,ifname=tap0,script=no,downscript=no
> -usb -vnc 127.0.0.1:0 -vga cirrus -device
> virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5


This shows KVM is being requested, but we should validate that KVM is
definitely being activated when under libvirt. You can test this by
doing:

    virsh qemu-monitor-command vmname1 'info kvm'

> Which was taken from libvirt's command line. The only modifications
> I did to the original libvirt commandline (seen with ps aux) were:
> 
> - Removed -S

Fine, has no effect on performance.

> - Network was: -netdev tap,fd=17,id=hostnet0,vhost=on,vhostfd=18
> -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:05:36:60,bus=pci.0,addr=0x3
> Has been simplified to: -net nic,model=virtio -net
> tap,ifname=tap0,script=no,downscript=no
> and manual bridging of the tap0 interface.

You could have equivalently used

 -netdev tap,ifname=tap0,script=no,downscript=no,id=hostnet0,vhost=on
 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:05:36:60,bus=pci.0,addr=0x3

That said, I don't expect this has anything todo with the performance
since booting a guest rarely involves much network I/O unless you're
doing something odd like NFS-root / iSCSI-root.

> Firstly I had thought that this could be fault of the VNC: I have
> compiled qemu-kvm with no separate vnc thread. I thought that
> libvirt might have connected to the vnc server at all times and this
> could have slowed down the whole VM.
> But then I also tried connecting vith vncviewer to the KVM machine
> launched directly from bash, and the speed of it didn't change. So
> no, it doesn't seem to be that.

Yeah, I have never seen VNC be responsible for the kind of slowdown
you describe.

> BTW: is the slowdown of the VM on "no separate vnc thread" only in
> effect when somebody is actually connected to VNC, or always?

Probably, but again I dont think it is likely to be relevant here.

> Also, note that the time difference is not visible in dmesg once the
> machine has booted. So it's not a slowdown in detecting devices.
> Devices are always detected within the first 3 seconds, according to
> dmesg, at 3.6 seconds the first ext4 mount begins. It seems to be
> really the OS boot that is slow... it seems an hard disk performance
> problem.


There are a couple of things that would be different between running the
VM directly, vs via libvirt.

 - Security drivers - SELinux/AppArmour
 - CGroups

If it is was AppArmour causing this slowdown I don't think you would have
been the first person to complain, so lets ignore that. Which leaves
cgroups as a likely culprit. Do a

  grep cgroup /proc/mounts

if any of them are mounted, then for each cgroups mount in turn,

 - Umount the cgroup
 - Restart libvirtd
 - Test your guest boot performance


Regards,
Daniel
-- 
|: http://berrange.com      -o-    http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org              -o-             http://virt-manager.org :|
|: http://autobuild.org       -o-         http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org       -o-       http://live.gnome.org/gtk-vnc :|
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux