On Mon, Aug 08, 2011 at 07:17:47AM +0200, Satz Klauer wrote: > Hi, > > currently I fail with a problem that I already had (and never could > solve) with QNX 6.4.1, now I tried again with QNX 6.5 but still don't > get it working. I start qemu with > > qemu-system-x86_64 -hda qnx.img -m 512 -net nic -net user > > (brain-attritional simple and well-working with all other operating > systems). QNX comes up without problems and it detects the network > card successfully. > > But with that network interface nearly nothing is possible: DHCP does > not work, assigning a fixed IP 10.0.2.15 / netmask 255.255.255.0 works > but I can't reach anything outside of this qemu-envorinment. The > default gateway is set to 10.0.2.2. > > Within the QNX-forum nobody could help, so may be here somebody has > some hints what I could try? Yes, I have QNX (although I only tried QNX 6.3.2) as guest with working network. As I posted on [1], I needed "-net nic,model=ne2k_pci" and to follow the instructions in [2], the part that says: "If this is not done, networking will not work, so we have to manually start it every time. To do this, type". Although I've only done this the first time and when I re-start the guest it just works. I don't know if this would work on QNX 6.5, but I suspect it does. Thanks a lot, Rodrigo [1]: http://www.linux-kvm.org/page/Guest_Support_Status [2]: http://community.qnx.com/sf/wiki/do/viewPage/projects.qemu/wiki/NeutrinoAsGuestInQEMU;jsessionid=82CAC3EC7E4C62A6DC51A1E021618862 -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
