Re: [PATCH] kvm tools: Use correct size for VESA memory bar

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 11, 2011 at 12:04:08PM +0300, Sasha Levin wrote:
>This patch makes BAR 1 16k, instead of BAR0 - which is the PIO bar.
>
>This fixes wrong output on lspci command and ioremap warnings during boot.
>
>Reported-by: David Evensky <evensky@xxxxxxxxxxxxxxxxxxxx>
>Signed-off-by: Sasha Levin <levinsasha928@xxxxxxxxx>
>---
> tools/kvm/hw/serial.c |    2 +-
> tools/kvm/hw/vesa.c   |    2 +-
> tools/kvm/pci.c       |    2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
>diff --git a/tools/kvm/hw/serial.c b/tools/kvm/hw/serial.c
>index 1199264..0393d3d 100644
>--- a/tools/kvm/hw/serial.c
>+++ b/tools/kvm/hw/serial.c
>@@ -213,7 +213,7 @@ static bool serial8250_out(struct ioport *ioport, struct kvm *kvm, u16 port, voi
> 		case UART_TX: {
> 			char *addr = data;
> 
>-			if (!(dev->mcr & UART_MCR_LOOP))
>+			if (!(dev->mcr & (UART_MCR_LOOP | UART_MCR_OUT2)))
I assume it was your mistake to include this part?

walimis
> 				term_putc(CONSOLE_8250, addr, size * count);
> 
> 			dev->iir		= UART_IIR_NO_INT;
>diff --git a/tools/kvm/hw/vesa.c b/tools/kvm/hw/vesa.c
>index 2af08df..9caa6c4 100644
>--- a/tools/kvm/hw/vesa.c
>+++ b/tools/kvm/hw/vesa.c
>@@ -39,6 +39,7 @@ static struct pci_device_header vesa_pci_device = {
> 	.subsys_vendor_id	= PCI_SUBSYSTEM_VENDOR_ID_REDHAT_QUMRANET,
> 	.subsys_id		= PCI_SUBSYSTEM_ID_VESA,
> 	.bar[1]			= VESA_MEM_ADDR | PCI_BASE_ADDRESS_SPACE_MEMORY,
>+	.bar_size[1]		= VESA_MEM_SIZE,
> };
> 
> static struct framebuffer vesafb;
>@@ -56,7 +57,6 @@ struct framebuffer *vesa__init(struct kvm *kvm)
> 	vesa_pci_device.irq_line	= line;
> 	vesa_base_addr			= ioport__register(IOPORT_EMPTY, &vesa_io_ops, IOPORT_SIZE, NULL);
> 	vesa_pci_device.bar[0]		= vesa_base_addr | PCI_BASE_ADDRESS_SPACE_IO;
>-	vesa_pci_device.bar_size[0]	= VESA_MEM_SIZE;
> 	pci__register(&vesa_pci_device, dev);
> 
> 	mem = mmap(NULL, VESA_MEM_SIZE, PROT_RW, MAP_ANON_NORESERVE, -1, 0);
>diff --git a/tools/kvm/pci.c b/tools/kvm/pci.c
>index fd19b73..0449aca 100644
>--- a/tools/kvm/pci.c
>+++ b/tools/kvm/pci.c
>@@ -95,7 +95,7 @@ static bool pci_config_data_out(struct ioport *ioport, struct kvm *kvm, u16 port
> 		offset = start + (pci_config_address.register_number << 2);
> 		if (offset < sizeof(struct pci_device_header)) {
> 			void *p = pci_devices[dev_num];
>-			u8 bar = offset - PCI_BAR_OFFSET(0);
>+			u8 bar = offset - PCI_BAR_OFFSET(0) / (sizeof(u32));
> 			u32 sz = PCI_IO_SIZE;
> 
> 			if (bar < 6 && pci_devices[dev_num]->bar_size[bar])
>-- 
>1.7.6
>
>--
>To unsubscribe from this list: send the line "unsubscribe kvm" in
>the body of a message to majordomo@xxxxxxxxxxxxxxx
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux