Re: [RFC v3 30/56] rtl8139: convert to memory API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 2011-07-10 at 21:14 +0300, Avi Kivity wrote:
> Signed-off-by: Avi Kivity <avi@xxxxxxxxxx>
> ---
>  hw/rtl8139.c |  172 +++++++++++++++++-----------------------------------------
>  1 files changed, 51 insertions(+), 121 deletions(-)
> 
> diff --git a/hw/rtl8139.c b/hw/rtl8139.c
> index 5214b8c..fa661fc 100644
> --- a/hw/rtl8139.c
> +++ b/hw/rtl8139.c
> @@ -474,7 +474,6 @@ typedef struct RTL8139State {
>  
>      NICState *nic;
>      NICConf conf;
> -    int rtl8139_mmio_io_addr;
>  
>      /* C ring mode */
>      uint32_t   currTxDesc;
> @@ -506,6 +505,9 @@ typedef struct RTL8139State {
>      QEMUTimer *timer;
>      int64_t TimerExpire;
>  
> +    MemoryRegion bar_io;
> +    MemoryRegion bar_mem;
> +
>      /* Support migration to/from old versions */
>      int rtl8139_mmio_io_addr_dummy;
>  } RTL8139State;
> @@ -2705,12 +2707,8 @@ static uint32_t rtl8139_MultiIntr_read(RTL8139State *s)
>      return ret;
>  }
>  
> -static void rtl8139_io_writeb(void *opaque, uint8_t addr, uint32_t val)
> +static void rtl8139_io_writeb(RTL8139State *s, uint8_t addr, uint32_t val)
>  {
> -    RTL8139State *s = opaque;
> -
> -    addr &= 0xff;
> -
>      switch (addr)
>      {
>          case MAC0 ... MAC0+5:
> @@ -2792,10 +2790,8 @@ static void rtl8139_io_writeb(void *opaque, uint8_t addr, uint32_t val)
>      }
>  }
>  
> -static void rtl8139_io_writew(void *opaque, uint8_t addr, uint32_t val)
> +static void rtl8139_io_writew(RTL8139State *s, uint8_t addr, uint32_t val)
>  {
> -    RTL8139State *s = opaque;
> -
>      addr &= 0xfe;
>  
>      switch (addr)
> @@ -2846,8 +2842,8 @@ static void rtl8139_io_writew(void *opaque, uint8_t addr, uint32_t val)
>              DPRINTF("ioport write(w) addr=0x%x val=0x%04x via write(b)\n",
>                  addr, val);
>  
> -            rtl8139_io_writeb(opaque, addr, val & 0xff);
> -            rtl8139_io_writeb(opaque, addr + 1, (val >> 8) & 0xff);
> +            rtl8139_io_writeb(s, addr, val & 0xff);
> +            rtl8139_io_writeb(s, addr + 1, (val >> 8) & 0xff);
>              break;
>      }
>  }
> @@ -2892,10 +2888,8 @@ static void rtl8139_set_next_tctr_time(RTL8139State *s, int64_t current_time)
>      }
>  }
>  
> -static void rtl8139_io_writel(void *opaque, uint8_t addr, uint32_t val)
> +static void rtl8139_io_writel(RTL8139State *s, uint8_t addr, uint32_t val)
>  {
> -    RTL8139State *s = opaque;
> -
>      addr &= 0xfc;
>  
>      switch (addr)
> @@ -2952,21 +2946,18 @@ static void rtl8139_io_writel(void *opaque, uint8_t addr, uint32_t val)
>          default:
>              DPRINTF("ioport write(l) addr=0x%x val=0x%08x via write(b)\n",
>                  addr, val);
> -            rtl8139_io_writeb(opaque, addr, val & 0xff);
> -            rtl8139_io_writeb(opaque, addr + 1, (val >> 8) & 0xff);
> -            rtl8139_io_writeb(opaque, addr + 2, (val >> 16) & 0xff);
> -            rtl8139_io_writeb(opaque, addr + 3, (val >> 24) & 0xff);
> +            rtl8139_io_writeb(s, addr, val & 0xff);
> +            rtl8139_io_writeb(s, addr + 1, (val >> 8) & 0xff);
> +            rtl8139_io_writeb(s, addr + 2, (val >> 16) & 0xff);
> +            rtl8139_io_writeb(s, addr + 3, (val >> 24) & 0xff);
>              break;
>      }
>  }
>  
> -static uint32_t rtl8139_io_readb(void *opaque, uint8_t addr)
> +static uint32_t rtl8139_io_readb(RTL8139State *s, uint8_t addr)
>  {
> -    RTL8139State *s = opaque;
>      int ret;
>  
> -    addr &= 0xff;
> -
>      switch (addr)
>      {
>          case MAC0 ... MAC0+5:
> @@ -3034,9 +3025,8 @@ static uint32_t rtl8139_io_readb(void *opaque, uint8_t addr)
>      return ret;
>  }
>  
> -static uint32_t rtl8139_io_readw(void *opaque, uint8_t addr)
> +static uint32_t rtl8139_io_readw(RTL8139State *s, uint8_t addr)
>  {
> -    RTL8139State *s = opaque;
>      uint32_t ret;
>  
>      addr &= 0xfe; /* mask lower bit */
> @@ -3101,8 +3091,8 @@ static uint32_t rtl8139_io_readw(void *opaque, uint8_t addr)
>          default:
>              DPRINTF("ioport read(w) addr=0x%x via read(b)\n", addr);
>  
> -            ret  = rtl8139_io_readb(opaque, addr);
> -            ret |= rtl8139_io_readb(opaque, addr + 1) << 8;
> +            ret  = rtl8139_io_readb(s, addr);
> +            ret |= rtl8139_io_readb(s, addr + 1) << 8;
>  
>              DPRINTF("ioport read(w) addr=0x%x val=0x%04x\n", addr, ret);
>              break;
> @@ -3182,71 +3172,40 @@ static uint32_t rtl8139_io_readl(void *opaque, uint8_t addr)
>      return ret;
>  }
>  
> -/* */
> -
> -static void rtl8139_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
> -{
> -    rtl8139_io_writeb(opaque, addr & 0xFF, val);
> -}
> -
> -static void rtl8139_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
> -{
> -    rtl8139_io_writew(opaque, addr & 0xFF, val);
> -}
> -
> -static void rtl8139_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
> -{
> -    rtl8139_io_writel(opaque, addr & 0xFF, val);
> -}
> -
> -static uint32_t rtl8139_ioport_readb(void *opaque, uint32_t addr)
> +static uint64_t rtl8139_io_read(void *opaque,
> +                                target_phys_addr_t addr,
> +                                unsigned size)
>  {
> -    return rtl8139_io_readb(opaque, addr & 0xFF);
> -}
> -
> -static uint32_t rtl8139_ioport_readw(void *opaque, uint32_t addr)
> -{
> -    return rtl8139_io_readw(opaque, addr & 0xFF);
> -}
> -
> -static uint32_t rtl8139_ioport_readl(void *opaque, uint32_t addr)
> -{
> -    return rtl8139_io_readl(opaque, addr & 0xFF);
> -}
> -
> -/* */
> -
> -static void rtl8139_mmio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
> -{
> -    rtl8139_io_writeb(opaque, addr & 0xFF, val);
> -}
> -
> -static void rtl8139_mmio_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
> -{
> -    rtl8139_io_writew(opaque, addr & 0xFF, val);
> -}
> +    RTL8139State *s = opaque;
>  
> -static void rtl8139_mmio_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
> -{
> -    rtl8139_io_writel(opaque, addr & 0xFF, val);
> +    switch (size) {
> +    case 1: return rtl8139_io_readb(s, addr);
> +    case 2: return rtl8139_io_readw(s, addr);
> +    case 4: return rtl8139_io_readl(s, addr);
> +    default: abort();
> +    }
>  }
>  
> -static uint32_t rtl8139_mmio_readb(void *opaque, target_phys_addr_t addr)
> +static void rtl8139_io_write(void *opaque,
> +                             target_phys_addr_t addr,
> +                             uint64_t data,
> +                             unsigned size)
>  {
> -    return rtl8139_io_readb(opaque, addr & 0xFF);
> -}
> +    RTL8139State *s = opaque;
>  
> -static uint32_t rtl8139_mmio_readw(void *opaque, target_phys_addr_t addr)
> -{
> -    uint32_t val = rtl8139_io_readw(opaque, addr & 0xFF);
> -    return val;
> +    switch (size) {
> +    case 1: return rtl8139_io_writeb(s, addr, data);
> +    case 2: return rtl8139_io_writew(s, addr, data);
> +    case 4: return rtl8139_io_writel(s, addr, data);
> +    default: abort();
> +    }
>  }
>  
> -static uint32_t rtl8139_mmio_readl(void *opaque, target_phys_addr_t addr)
> -{
> -    uint32_t val = rtl8139_io_readl(opaque, addr & 0xFF);
> -    return val;
> -}
> +static MemoryRegionOps rtl8139_io_ops = {
> +    .read = rtl8139_io_read,
> +    .write = rtl8139_io_write,
> +    .endianness = DEVICE_LITTLE_ENDIAN,
> +};
>  
>  static int rtl8139_post_load(void *opaque, int version_id)
>  {
> @@ -3283,7 +3242,7 @@ static void rtl8139_pre_save(void *opaque)
>      rtl8139_set_next_tctr_time(s, current_time);
>      s->TCTR = muldiv64(current_time - s->TCTR_base, PCI_FREQUENCY,
>                         get_ticks_per_sec());
> -    s->rtl8139_mmio_io_addr_dummy = s->rtl8139_mmio_io_addr;
> +    s->rtl8139_mmio_io_addr_dummy = 0;

This makes the dummy value fairly useless for preserving new->old
migration.  Drop it altogether and bump the version or add a subsection
to prevent migration to old versions that consume this?

Alex


>  }
>  
>  static const VMStateDescription vmstate_rtl8139 = {
> @@ -3379,33 +3338,6 @@ static const VMStateDescription vmstate_rtl8139 = {
>  /***********************************************************/
>  /* PCI RTL8139 definitions */
>  
> -static void rtl8139_ioport_map(PCIDevice *pci_dev, int region_num,
> -                       pcibus_t addr, pcibus_t size, int type)
> -{
> -    RTL8139State *s = DO_UPCAST(RTL8139State, dev, pci_dev);
> -
> -    register_ioport_write(addr, 0x100, 1, rtl8139_ioport_writeb, s);
> -    register_ioport_read( addr, 0x100, 1, rtl8139_ioport_readb,  s);
> -
> -    register_ioport_write(addr, 0x100, 2, rtl8139_ioport_writew, s);
> -    register_ioport_read( addr, 0x100, 2, rtl8139_ioport_readw,  s);
> -
> -    register_ioport_write(addr, 0x100, 4, rtl8139_ioport_writel, s);
> -    register_ioport_read( addr, 0x100, 4, rtl8139_ioport_readl,  s);
> -}
> -
> -static CPUReadMemoryFunc * const rtl8139_mmio_read[3] = {
> -    rtl8139_mmio_readb,
> -    rtl8139_mmio_readw,
> -    rtl8139_mmio_readl,
> -};
> -
> -static CPUWriteMemoryFunc * const rtl8139_mmio_write[3] = {
> -    rtl8139_mmio_writeb,
> -    rtl8139_mmio_writew,
> -    rtl8139_mmio_writel,
> -};
> -
>  static void rtl8139_timer(void *opaque)
>  {
>      RTL8139State *s = opaque;
> @@ -3432,7 +3364,8 @@ static int pci_rtl8139_uninit(PCIDevice *dev)
>  {
>      RTL8139State *s = DO_UPCAST(RTL8139State, dev, dev);
>  
> -    cpu_unregister_io_memory(s->rtl8139_mmio_io_addr);
> +    memory_region_destroy(&s->bar_io);
> +    memory_region_destroy(&s->bar_mem);
>      if (s->cplus_txbuffer) {
>          qemu_free(s->cplus_txbuffer);
>          s->cplus_txbuffer = NULL;
> @@ -3462,15 +3395,12 @@ static int pci_rtl8139_init(PCIDevice *dev)
>       * list bit in status register, and offset 0xdc seems unused. */
>      pci_conf[PCI_CAPABILITY_LIST] = 0xdc;
>  
> -    /* I/O handler for memory-mapped I/O */
> -    s->rtl8139_mmio_io_addr =
> -        cpu_register_io_memory(rtl8139_mmio_read, rtl8139_mmio_write, s,
> -                               DEVICE_LITTLE_ENDIAN);
> -
> -    pci_register_bar(&s->dev, 0, 0x100,
> -                           PCI_BASE_ADDRESS_SPACE_IO,  rtl8139_ioport_map);
> -
> -    pci_register_bar_simple(&s->dev, 1, 0x100, 0, s->rtl8139_mmio_io_addr);
> +    memory_region_init_io(&s->bar_io, &rtl8139_io_ops, s, "rtl8139", 0x100);
> +    memory_region_init_io(&s->bar_mem, &rtl8139_io_ops, s, "rtl8139", 0x100);
> +    pci_register_bar_region(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_IO,
> +                            &s->bar_io);
> +    pci_register_bar_region(&s->dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY,
> +                            &s->bar_mem);
>  
>      qemu_macaddr_default_if_unset(&s->conf.macaddr);
>  



--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux