Re: [PATCH 13/13] qemu-kvm: Resolve PCI upstream diffs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 27, 2011 at 08:19:56PM +0200, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
> 
> Device assignment no longer peeks into config_map, so we can drop all
> the related changes and sync the PCI core with upstream.
> 
> Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>

That's great because I was looking at refactoring that code.
Will make merges much less painful.

> ---
>  hw/pci.c |   29 +++++++++++++++--------------
>  hw/pci.h |    8 ++++++--
>  2 files changed, 21 insertions(+), 16 deletions(-)
> 
> diff --git a/hw/pci.c b/hw/pci.c
> index 5deaa04..a637506 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -793,7 +793,7 @@ static void pci_config_alloc(PCIDevice *pci_dev)
>      pci_dev->cmask = qemu_mallocz(config_size);
>      pci_dev->wmask = qemu_mallocz(config_size);
>      pci_dev->w1cmask = qemu_mallocz(config_size);
> -    pci_dev->config_map = qemu_mallocz(config_size);
> +    pci_dev->used = qemu_mallocz(config_size);
>  }
>  
>  static void pci_config_free(PCIDevice *pci_dev)
> @@ -802,7 +802,7 @@ static void pci_config_free(PCIDevice *pci_dev)
>      qemu_free(pci_dev->cmask);
>      qemu_free(pci_dev->wmask);
>      qemu_free(pci_dev->w1cmask);
> -    qemu_free(pci_dev->config_map);
> +    qemu_free(pci_dev->used);
>  }
>  
>  /* -1 for devfn means auto assign */
> @@ -833,8 +833,6 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus,
>      pci_dev->irq_state = 0;
>      pci_config_alloc(pci_dev);
>  
> -    memset(pci_dev->config_map, 0xff, PCI_CONFIG_HEADER_SIZE);
> -
>      pci_config_set_vendor_id(pci_dev->config, info->vendor_id);
>      pci_config_set_device_id(pci_dev->config, info->device_id);
>      pci_config_set_revision(pci_dev->config, info->revision);
> @@ -1899,7 +1897,7 @@ static int pci_find_space(PCIDevice *pdev, uint8_t size)
>      int offset = PCI_CONFIG_HEADER_SIZE;
>      int i;
>      for (i = PCI_CONFIG_HEADER_SIZE; i < config_size; ++i)
> -        if (pdev->config_map[i])
> +        if (pdev->used[i])
>              offset = i + 1;
>          else if (i - offset + 1 == size)
>              return offset;
> @@ -2080,13 +2078,13 @@ int pci_add_capability(PCIDevice *pdev, uint8_t cap_id,
>          int i;
>  
>          for (i = offset; i < offset + size; i++) {
> -            if (pdev->config_map[i]) {
> +            if (pdev->used[i]) {
>                  fprintf(stderr, "ERROR: %04x:%02x:%02x.%x "
>                          "Attempt to add PCI capability %x at offset "
>                          "%x overlaps existing capability %x at offset %x\n",
>                          pci_find_domain(pdev->bus), pci_bus_num(pdev->bus),
>                          PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
> -                        cap_id, offset, pdev->config_map[i], i);
> +                        cap_id, offset, pdev->used[i], i);
>                  return -EINVAL;
>              }
>          }
> @@ -2096,14 +2094,12 @@ int pci_add_capability(PCIDevice *pdev, uint8_t cap_id,
>      config[PCI_CAP_LIST_ID] = cap_id;
>      config[PCI_CAP_LIST_NEXT] = pdev->config[PCI_CAPABILITY_LIST];
>      pdev->config[PCI_CAPABILITY_LIST] = offset;
> -    memset(pdev->config_map + offset, cap_id, size);
> +    pdev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
> +    memset(pdev->used + offset, 0xFF, size);
>      /* Make capability read-only by default */
>      memset(pdev->wmask + offset, 0, size);
>      /* Check capability by default */
>      memset(pdev->cmask + offset, 0xFF, size);
> -
> -    pdev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
> -
>      return offset;
>  }
>  
> @@ -2119,11 +2115,16 @@ void pci_del_capability(PCIDevice *pdev, uint8_t cap_id, uint8_t size)
>      memset(pdev->w1cmask + offset, 0, size);
>      /* Clear cmask as device-specific registers can't be checked */
>      memset(pdev->cmask + offset, 0, size);
> -    memset(pdev->config_map + offset, 0, size);
> +    memset(pdev->used + offset, 0, size);
>  
> -    if (!pdev->config[PCI_CAPABILITY_LIST]) {
> +    if (!pdev->config[PCI_CAPABILITY_LIST])
>          pdev->config[PCI_STATUS] &= ~PCI_STATUS_CAP_LIST;
> -    }
> +}
> +
> +/* Reserve space for capability at a known offset (to call after load). */
> +void pci_reserve_capability(PCIDevice *pdev, uint8_t offset, uint8_t size)
> +{
> +    memset(pdev->used + offset, 0xff, size);
>  }
>  
>  uint8_t pci_find_capability(PCIDevice *pdev, uint8_t cap_id)
> diff --git a/hw/pci.h b/hw/pci.h
> index c7081bc..ed734b3 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -146,8 +146,8 @@ struct PCIDevice {
>      /* Used to implement RW1C(Write 1 to Clear) bytes */
>      uint8_t *w1cmask;
>  
> -    /* Used to allocate config space and track capabilities. */
> -    uint8_t *config_map;
> +    /* Used to allocate config space capabilities. */
> +    uint8_t *used;
>  
>      /* the following fields are read only */
>      PCIBus *bus;
> @@ -233,14 +233,18 @@ int pci_add_capability(PCIDevice *pdev, uint8_t cap_id,
>  
>  void pci_del_capability(PCIDevice *pci_dev, uint8_t cap_id, uint8_t cap_size);
>  
> +void pci_reserve_capability(PCIDevice *pci_dev, uint8_t offset, uint8_t size);
> +
>  uint8_t pci_find_capability(PCIDevice *pci_dev, uint8_t cap_id);
>  
> +
>  uint32_t pci_default_read_config(PCIDevice *d,
>                                   uint32_t address, int len);
>  void pci_default_write_config(PCIDevice *d,
>                                uint32_t address, uint32_t val, int len);
>  void pci_device_save(PCIDevice *s, QEMUFile *f);
>  int pci_device_load(PCIDevice *s, QEMUFile *f);
> +
>  typedef void (*pci_set_irq_fn)(void *opaque, int irq_num, int level);
>  typedef int (*pci_map_irq_fn)(PCIDevice *pci_dev, int irq_num);
>  
> -- 
> 1.7.1
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux